luke has uploaded this change for review.
flashchips.c: Add support for XMC new spi flash types
XM25QU64C
XM25QU128C
XM25QU256C
XM25QH64C
XM25QH128C
XM25QH256C
TEST=test
Signed-off-by: Luke He <sixuerain@qq.com>
Change-Id: I15c51b0f1ed789bcb2cabe33bc830f8d5d916969
Change-Id: I71e1ba0d739f080dd3030108d50da7667f75ced0
---
M flashchips.c
M flashchips.h
2 files changed, 245 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/10/49010/1
diff --git a/flashchips.c b/flashchips.c
index c4a1e6f..3e27e79 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -18993,6 +18993,244 @@
},
{
+ .vendor = "XMC",
+ .name = "XM25QH64C",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QH64C,
+ .total_size = 8192,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain,
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "XMC",
+ .name = "XM25QU64C",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QU64C,
+ .total_size = 8192,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain,
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "XMC",
+ .name = "XM25QH128C",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QH128C,
+ .total_size = 16384,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 4096} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 512} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {16 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain,
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "XMC",
+ .name = "XM25QU128C",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QU128C,
+ .total_size = 16384,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 4096} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 512} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {16 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "XMC",
+ .name = "XM25QH256C",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QH256C,
+ .total_size = 32768,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
+ | FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 8192} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 1024} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 512} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "XMC",
+ .name = "XM25QU256C",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = XMC_XM25QU256C,
+ .total_size = 32768,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
+ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
+ | FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 8192} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 1024} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 512} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1650, 1950},
+ },
+
+ {
.vendor = "Zetta Device",
.name = "ZD25D20",
.bustype = BUS_SPI,
diff --git a/flashchips.h b/flashchips.h
index 394eb30..a85fa6a 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -792,7 +792,7 @@
* ST25P chips are SPI, first byte of device ID is memory type, second
* byte of device ID is related to log(bitsize) at least for some chips.
*/
-#define ST_ID 0x20 /* ST / SGS/Thomson / Numonyx (later acquired by Micron) */
+#define ST_ID 0x20 /* ST / SGS/Thomson / Numonyx / XMC(later acquired by Micron) */
#define ST_M25P05A 0x2010
#define ST_M25P05_RES 0x05
#define ST_M25P10A 0x2011
@@ -811,6 +811,12 @@
#define ST_M45PE40 0x4013
#define ST_M45PE80 0x4014
#define ST_M45PE16 0x4015
+#define XMC_XM25QH64C 0x4017
+#define XMC_XM25QU64C 0x4117
+#define XMC_XM25QH128C 0x4018
+#define XMC_XM25QU128C 0x4118
+#define XMC_XM25QH256C 0x4019
+#define XMC_XM25QU256C 0x4119
#define ST_M25PX80 0x7114
#define ST_M25PX16 0x7115
#define ST_M25PX32 0x7116
To view, visit change 49010. To unsubscribe, or for help writing mail filters, visit settings.