[M] Change in flashrom[master]: rayer_spi.c: Get rid of temporary `prog_type` string

[Angel Pons (Code Review)]

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/68239 )

Change subject: rayer_spi.c: Get rid of temporary `prog_type` string
......................................................................

rayer_spi.c: Get rid of temporary `prog_type` string

Make the `get_params()` function provide a pointer to `struct
rayer_programmer` directly, instead of having a `prog_type` string
passed around three functions.

Change-Id: I83e34382ee9814f224025e21e5099fdab73cee8c
Signed-off-by: Angel Pons 
---
M rayer_spi.c
1 file changed, 58 insertions(+), 50 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/39/68239/1

diff --git a/rayer_spi.c b/rayer_spi.c
index 6984099..8ebfb2d 100644
--- a/rayer_spi.c
+++ b/rayer_spi.c
@@ -225,49 +225,6 @@
    .half_period	= 0,
 };

-static int get_params(const struct programmer_cfg *cfg, uint16_t *lpt_iobase, char **prog_type)
-{
-	/* Pick a default value for the I/O base. */
-	*lpt_iobase = 0x378;
-	/* no programmer type specified. */
-	*prog_type = NULL;
-
-	/* Non-default port requested? */
-	char *arg = extract_programmer_param_str(cfg, "iobase");
-	if (arg) {
-		char *endptr = NULL;
-		unsigned long tmp = strtoul(arg, &endptr, 0);
-		/* Port 0, port >0x10000, unaligned ports and garbage strings
-		 * are rejected.
-		 */
-		if (!tmp || (tmp >= 0x10000) || (tmp & 0x3) ||
-		    (*endptr != '\0')) {
-			/* Using ports below 0x100 is a really bad idea, and
-			 * should only be done if no port between 0x100 and
-			 * 0xfffc works due to routing issues.
-			 */
-			msg_perr("Error: iobase= specified, but the I/O base "
-				 "given was invalid.\nIt must be a multiple of "
-				 "0x4 and lie between 0x100 and 0xfffc.\n");
-			free(arg);
-			return -1;
-		} else {
-			*lpt_iobase = (uint16_t)tmp;
-			msg_pinfo("Non-default I/O base requested. This will "
-				  "not change the hardware settings.\n");
-		}
-		free(arg);
-	}
-
-	arg = extract_programmer_param_str(cfg, "type");
-	if (arg) {
-		*prog_type = strdup(arg);
-		free(arg);
-	}
-
-	return 0;
-}
-
 static const struct rayer_programmer *find_progtype(const char *prog_type)
 {
    if (!prog_type)
@@ -297,21 +254,58 @@
    return prog;
 }

+static int get_params(const struct programmer_cfg *cfg, uint16_t *lpt_iobase,
+		      const struct rayer_programmer **prog)
+{
+	/* Pick a default value for the I/O base. */
+	*lpt_iobase = 0x378;
+	/* no programmer type specified. */
+	*prog = NULL;
+
+	/* Non-default port requested? */
+	char *arg = extract_programmer_param_str(cfg, "iobase");
+	if (arg) {
+		char *endptr = NULL;
+		unsigned long tmp = strtoul(arg, &endptr, 0);
+		/* Port 0, port >0x10000, unaligned ports and garbage strings
+		 * are rejected.
+		 */
+		if (!tmp || (tmp >= 0x10000) || (tmp & 0x3) ||
+		    (*endptr != '\0')) {
+			/* Using ports below 0x100 is a really bad idea, and
+			 * should only be done if no port between 0x100 and
+			 * 0xfffc works due to routing issues.
+			 */
+			msg_perr("Error: iobase= specified, but the I/O base "
+				 "given was invalid.\nIt must be a multiple of "
+				 "0x4 and lie between 0x100 and 0xfffc.\n");
+			free(arg);
+			return -1;
+		} else {
+			*lpt_iobase = (uint16_t)tmp;
+			msg_pinfo("Non-default I/O base requested. This will "
+				  "not change the hardware settings.\n");
+		}
+		free(arg);
+	}
+
+	arg = extract_programmer_param_str(cfg, "type");
+	*prog = find_progtype(arg);
+	free(arg);
+
+	return *prog ? 0 : -1;
+}
+
 static int rayer_spi_init(const struct programmer_cfg *cfg)
 {
+	const struct rayer_programmer *prog;
    struct rayer_pinout *pinout = NULL;
    uint16_t lpt_iobase;
-	char *prog_type;

if (rget_io_perms())
    	return 1;

-	if (get_params(cfg, &lpt_iobase, &prog_type) < 0)
-		return 1;
-
-	const struct rayer_programmer *prog = find_progtype(prog_type);
-	free(prog_type);
-	if (!prog)
+	if (get_params(cfg, &lpt_iobase, &prog) < 0)
    	return 1;

msg_pdbg("Using address 0x%x as I/O base for parallel port access.\n",