Anastasia Klimchuk has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/83941?usp=email )
Change subject: tree: Remove print_wiki.c ......................................................................
tree: Remove print_wiki.c
Old wiki website is retired and so is print_wiki.c
Change-Id: I9990add27f7fdddc23ddd1f33306566ce7548417 Signed-off-by: Anastasia Klimchuk aklm@flashrom.org --- M cli_classic.c M doc/classic_cli_manpage.rst M include/flash.h M include/programmer.h M known_boards.c M meson.build M meson_options.txt D print_wiki.c 8 files changed, 2 insertions(+), 508 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/41/83941/1
diff --git a/cli_classic.c b/cli_classic.c index ffded5f..3343438 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -51,9 +51,6 @@ bool read_it, extract_it, write_it, erase_it, verify_it; bool dont_verify_it, dont_verify_all; bool list_supported; -#if CONFIG_PRINT_WIKI == 1 - bool list_supported_wiki; -#endif char *filename;
const struct programmer_entry *prog; @@ -81,9 +78,6 @@ static void cli_classic_usage(const char *name) { printf("Usage: %s [-h|-R|-L|" -#if CONFIG_PRINT_WIKI == 1 - "-z|" -#endif "\n\t-p <programmername>[:<parameters>] [-c <chipname>]\n" "\t\t(--flash-name|--flash-size|\n" "\t\t [-E|-x|(-r|-w|-v) <file>]\n" @@ -124,16 +118,10 @@ " -o | --output <logfile> log output to <logfile>\n" " --flash-contents <ref-file> assume flash contents to be <ref-file>\n" " -L | --list-supported print supported devices\n" -#if CONFIG_PRINT_WIKI == 1 - " -z | --list-supported-wiki print supported devices in wiki syntax\n" -#endif " --progress show progress percentage on the standard output\n" " -p | --programmer <name>[:<param>] specify the programmer device. One of\n"); list_programmers_linebreak(4, 80, 0); printf(".\n\nYou can specify one of -h, -R, -L, " -#if CONFIG_PRINT_WIKI == 1 - "-z, " -#endif "-E, -r, -w, -v or no operation.\n" "If no operation is specified, flashrom will only probe for flash chips.\n"); } @@ -754,15 +742,6 @@ cli_classic_validate_singleop(&operation_specified); options->list_supported = true; break; - case 'z': -#if CONFIG_PRINT_WIKI == 1 - cli_classic_validate_singleop(&operation_specified); - options->list_supported_wiki = true; -#else - cli_classic_abort_usage("Error: Wiki output was not " - "compiled in. Aborting.\n"); -#endif - break; case 'p': if (options->prog != NULL) { cli_classic_abort_usage("Error: --programmer specified " @@ -895,7 +874,6 @@ {"wp-enable", 0, NULL, OPTION_WP_ENABLE}, {"wp-disable", 0, NULL, OPTION_WP_DISABLE}, {"list-supported", 0, NULL, 'L'}, - {"list-supported-wiki", 0, NULL, 'z'}, {"programmer", 1, NULL, 'p'}, {"help", 0, NULL, 'h'}, {"version", 0, NULL, 'R'}, @@ -934,13 +912,6 @@ if (options.logfile && open_logfile(options.logfile)) cli_classic_abort_usage(NULL);
-#if CONFIG_PRINT_WIKI == 1 - if (options.list_supported_wiki) { - print_supported_wiki(); - goto out; - } -#endif - if (options.list_supported) { if (print_supported()) ret = 1; diff --git a/doc/classic_cli_manpage.rst b/doc/classic_cli_manpage.rst index d8380c7..932f4c9 100644 --- a/doc/classic_cli_manpage.rst +++ b/doc/classic_cli_manpage.rst @@ -11,7 +11,7 @@ SYNOPSIS --------
-| **flashrom** [-h|-R|-L|-z| +| **flashrom** [-h|-R|-L| | -p <programmername>[:<parameters>] [-c <chipname>] | (--flash-name|--flash-size| | [-E|-x|-r <file>|-w <file>|-v <file>] @@ -39,7 +39,7 @@ OPTIONS -------
-You can specify one of ``-h``, ``-R``, ``-L``, ``-z``, ``-E``, ``-r``, ``-w``, ``-v`` or no operation. +You can specify one of ``-h``, ``-R``, ``-L``, ``-E``, ``-r``, ``-w``, ``-v`` or no operation. If no operation is specified, **flashrom** will only probe for flash chips. It is recommended that if you try **flashrom** the first time on a system, you run it in probe-only mode and check the output. Also you are advised to make a backup of your current ROM contents with ``-r`` before you try to write a new image. @@ -256,12 +256,6 @@ For verification you have to test an ERASE and/or WRITE operation, so make sure you only do that if you have proper means to recover from failure!
-**-z, --list-supported-wiki** - Same as ``--list-supported``, but outputs the supported hardware in MediaWiki syntax, - so that it can be easily pasted into the `supported hardware wiki page https://flashrom.org/Supported_hardware`_. - Please note that MediaWiki output is not compiled in by default. - - **-p, --programmer <name>[:parameter[,parameter[,parameter]]]** Specify the programmer device. This is mandatory for all operations involving any chip access (probe/read/write/...). Currently supported are: diff --git a/include/flash.h b/include/flash.h index aa89409..d9a20ad 100644 --- a/include/flash.h +++ b/include/flash.h @@ -606,7 +606,6 @@
/* print.c */ int print_supported(void); -void print_supported_wiki(void);
/* helpers.c */ uint32_t address_to_bits(uint32_t addr); diff --git a/include/programmer.h b/include/programmer.h index a90624b..77e79ae 100644 --- a/include/programmer.h +++ b/include/programmer.h @@ -208,10 +208,8 @@ const char *vendor; const char *name; const enum test_state working; -#ifdef CONFIG_PRINT_WIKI const char *url; const char *note; -#endif };
extern const struct board_info boards_known[]; diff --git a/known_boards.c b/known_boards.c index afc6992..c412b8f 100644 --- a/known_boards.c +++ b/known_boards.c @@ -18,12 +18,7 @@
#include "programmer.h"
- -#ifdef CONFIG_PRINT_WIKI #define B(vendor, name, status, url, note) { vendor, name, status, url, note } -#else -#define B(vendor, name, status, url, note) { vendor, name, status } -#endif
/* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info boards_known[] = { diff --git a/meson.build b/meson.build index ae56b26..85d69b8 100644 --- a/meson.build +++ b/meson.build @@ -61,7 +61,6 @@ add_project_arguments('-DFLASHROM_VERSION="' + flashrom_version + '"', language : 'c')
# get defaults from configure -config_print_wiki= get_option('classic_cli_print_wiki') config_default_programmer_name = get_option('default_programmer_name') config_default_programmer_args = get_option('default_programmer_args')
@@ -623,15 +622,6 @@ endif endforeach
-if config_print_wiki.enabled() - if get_option('classic_cli').disabled() - error('`classic_cli_print_wiki` can not be enabled without `classic_cli`') - else - srcs += files('print_wiki.c') - cargs += '-DCONFIG_PRINT_WIKI=1' - endif -endif - if config_default_programmer_name != '' cargs += '-DCONFIG_DEFAULT_PROGRAMMER_NAME=&programmer_' + config_default_programmer_name else diff --git a/meson_options.txt b/meson_options.txt index 8a04114..0f56e26 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -1,5 +1,4 @@ option('classic_cli', type : 'feature', value : 'enabled', description : 'classic flashrom cli binary') -option('classic_cli_print_wiki', type : 'feature', value : 'disabled', description : 'Print Wiki') option('default_programmer_name', type : 'string', description : 'default programmer') option('default_programmer_args', type : 'string', description : 'default programmer arguments') option('ich_descriptors_tool', type : 'feature', value : 'auto', description : 'Build ich_descriptors_tool') diff --git a/print_wiki.c b/print_wiki.c deleted file mode 100644 index a0cade9..0000000 --- a/print_wiki.c +++ /dev/null @@ -1,452 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * Copyright (C) 2009 Carl-Daniel Hailfinger - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> -#include <time.h> -#include "flash.h" -#include "flashchips.h" -#include "programmer.h" - -static const char wiki_header[] = "= Supported devices =\n\n\ -<div style="margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \ -background-color:#eeeeee; text-align:left; border:1px solid #aabbcc;">\ -<small>\n\ -'''Last update:''' %s (generated by flashrom %s)<br />\n\ -The tables below are generated from flashrom's source by copying the output of '''flashrom -z'''.<br /><br />\n\ -A short explanation of the cells representing the support state follows:<br />\n\ -{| border="0" valign="top"\n\ -! style="text-align:left;" |\n\ -! style="text-align:left;" |\n\ -|-\n\ -|{{OK}}\n\ -| The feature was '''tested and should work''' in general unless there is a bug in flashrom or another component in \ -the system prohibits some functionality.\n\ -|-\n\ -|{{Dep}}\n\ -| '''Configuration-dependent'''. The feature was tested and should work in general but there are common \ -configurations that drastically limit flashrom's capabilities or make it completely stop working.\n\ -|-\n\ -|{{?3}}\n\ -| The feature is '''untested''' but believed to be working.\n\ -|-\n\ -|{{NA}}\n\ -| The feature is '''not applicable''' in this configuration (e.g. write operations on ROM chips).\n\ -|-\n\ -|{{No}}\n\ -| The feature is '''known to not work'''. Don't bother testing (nor reporting. Patches welcome! ;).\n\ -|}\n\ -</small></div>\n"; - -static const char th_start[] = "| valign="top"|\n\n\ -{| border="0" style="font-size: smaller" valign="top"\n\ -|- bgcolor="#6699dd"\n"; - -#if CONFIG_INTERNAL == 1 -static const char chipset_th[] = "\ -! align="left" | Vendor\n\ -! align="left" | Southbridge\n\ -! align="center" | PCI IDs\n\ -! align="center" | Status\n\n"; - -static const char board_th[] = "\ -! align="left" | Vendor\n\ -! align="left" | Mainboard\n\ -! align="left" | Required option\n\ -! align="center" | Status\n\n"; - -static const char board_intro[] = "\ -\n== Supported mainboards ==\n\n\ -In general, it is very likely that flashrom works out of the box even if your \ -mainboard is not listed below.\n\nThis is a list of mainboards where we have \ -verified that they either do or do not need any special initialization to \ -make flashrom work (given flashrom supports the respective chipset and flash \ -chip), or that they do not yet work at all. If they do not work, support may \ -or may not be added later.\n\n\ -Mainboards (or individual revisions) which don't appear in the list may or may \ -not work (we don't know, someone has to give it a try). Please report any \ -further verified mainboards on the [[Contact#Mailing_List|mailing list]].\n"; -#endif - -static const char chip_th[] = "\ -! align="left" | Vendor\n\ -! align="left" | Device\n\ -! align="center" | Size [kB]\n\ -! align="center" | Type\n\ -! align="center" colspan="4" | Status\n\ -! align="center" colspan="2" | Voltage [V]\n\n\ -|- bgcolor="#6699ff"\n| colspan="4" | \n\ -| Probe\n| Read\n| Erase\n| Write\n\ -| align="center" | Min\n| align="center" | Max\n\n"; - -static const char chip_intro[] = "\ -\n== Supported flash chips ==\n\n\ -The list below contains all chips that have some kind of explicit support added to flashrom and their last \ -known test status. Newer SPI flash chips might work even without explicit support if they implement SFDP ([\ -http://www.jedec.org/standards-documents/docs/jesd216 Serial Flash Discoverable Parameters - JESD216]). \ -Flashrom will detect this automatically and inform you about it.\n\n\ -The names used below are designed to be as concise as possible and hence contain only the characters \ -describing properties that are relevant to flashrom. Irrelevant characters specify attributes flashrom can not \ -use or even detect by itself (e.g. the physical package) and have no effect on flashrom's operation. They are \ -replaced by dots ('.') functioning as wildcards (like in Regular Expressions) or are completely omitted at the \ -end of a name.\n"; - -static const char programmer_th[] = "\ -! align="left" | Programmer\n\ -! align="left" | Vendor\n\ -! align="left" | Device\n\ -! align="center" | IDs\n\ -! align="center" | Status\n\n"; - -/* The output of this module relies on MediaWiki templates to select special formatting styles for table cells - * reflecting the test status of the respective hardware. This functions returns the correct template name for - * the supplied enum test_state. */ -static const char *test_state_to_template(enum test_state test_state) -{ - switch (test_state) { - case OK: return "OK"; - case BAD: return "No"; - case NA: return "NA"; - case DEP: return "Dep"; - case NT: - default: return "?3"; - } -} - -#if CONFIG_INTERNAL == 1 -static const char laptop_intro[] = "\n== Supported mobile devices (laptops, tablets etc.) ==\n\n\ -In general, flashing mobile devices is more difficult because they\n\n\ -* often use the flash chip for stuff besides the BIOS,\n\ -* often have special protection stuff which has to be handled by flashrom,\n\ -* often use flash translation circuits which need drivers in flashrom.\n\n\ -<div style="margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \ -background-color:#ff6666; align:right; border:1px solid #000000;">\n\ -'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \ -untested mobile devices unless you have a means to recover from a flashing that goes \ -wrong (a working backup flash chip and/or good soldering skills).\n</div>\n"; - -static void print_supported_chipsets_wiki(int cols) -{ - int i; - unsigned int lines_per_col; - const struct penable *e; - int enablescount = 0, color = 1; - - for (e = chipset_enables; e->vendor_name != NULL; e++) - enablescount++; - - /* +1 to force the resulting number of columns to be < cols */ - lines_per_col = enablescount / cols + ((enablescount%cols) > 0 ? 1 : 0); - - printf("\n== Supported chipsets ==\n\nTotal amount of supported chipsets: '''%d'''\n\n" - "{| border="0" valign="top"\n", enablescount); - - e = chipset_enables; - for (i = 0; e[i].vendor_name != NULL; i++) { - if ((i % lines_per_col) == 0) - printf("%s%s", th_start, chipset_th); - - /* Alternate colors if the vendor changes. */ - if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name)) - color = !color; - - printf("|- bgcolor="#%s"\n| %s || %s " - "|| %04x:%04x || {{%s}}\n", (color) ? "eeeeee" : "dddddd", - e[i].vendor_name, e[i].device_name, - e[i].vendor_id, e[i].device_id, - test_state_to_template(e[i].status)); - - if (((i % lines_per_col) + 1) == lines_per_col) - printf("\n|}\n\n"); - } - - /* end inner table if it did not fill the last column fully */ - if (((i % lines_per_col)) > 0) - printf("\n|}\n\n"); - printf("\n\n|}\n"); -} - -static void print_supported_boards_wiki_helper(const char *devicetype, int cols, const struct board_info boards[]) -{ - int i, k; - unsigned int boardcount, lines_per_col; - unsigned int boardcount_good = 0, boardcount_bad = 0, boardcount_nt = 0; - int num_notes = 0, color = 1; - char *notes = calloc(1, 1); - char tmp[900 + 1]; - const struct board_match *b = board_matches; - - for (i = 0; boards[i].vendor != NULL; i++) { - if (boards[i].working == OK) - boardcount_good++; - else if (boards[i].working == NT) - boardcount_nt++; - else - boardcount_bad++; - } - boardcount = boardcount_good + boardcount_nt + boardcount_bad; - - /* +1 to force the resulting number of columns to be < cols */ - lines_per_col = boardcount / cols + ((boardcount%cols) > 0 ? 1 : 0); - - printf("\n\nTotal amount of known good %s: '''%d'''; " - "Untested (e.g. user vanished before testing new code): '''%d'''; " - "Not yet supported (i.e. known-bad): '''%d'''.\n\n" - "{| border="0" valign="top"\n", devicetype, boardcount_good, boardcount_nt, boardcount_bad); - - for (i = 0; boards[i].vendor != NULL; i++) { - if ((i % lines_per_col) == 0) - printf("%s%s", th_start, board_th); - - /* Alternate colors if the vendor changes. */ - if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor)) - color = !color; - - k = 0; - while ((b[k].vendor_name != NULL) && - (strcmp(b[k].vendor_name, boards[i].vendor) || - strcmp(b[k].board_name, boards[i].name))) { - k++; - } - - printf("|- bgcolor="#%s"\n| %s || %s%s %s%s || %s%s%s%s " - "|| {{%s}}", (color) ? "eeeeee" : "dddddd", - boards[i].vendor, - boards[i].url ? "[" : "", - boards[i].url ? boards[i].url : "", - boards[i].name, - boards[i].url ? "]" : "", - b[k].lb_vendor ? "-p internal:mainboard=" : "—", - b[k].lb_vendor ? b[k].lb_vendor : "", - b[k].lb_vendor ? ":" : "", - b[k].lb_vendor ? b[k].lb_part : "", - test_state_to_template(boards[i].working)); - - if (boards[i].note) { - num_notes++; - printf(" <span id="%s_ref%d"><sup>[[#%s_note%d|%d]]</sup></span>\n", - devicetype, num_notes, devicetype, num_notes, num_notes); - int ret = snprintf(tmp, sizeof(tmp), - "<span id="%s_note%d">%d. [[#%s_ref%d|↑]]</span>" - " <nowiki>%s</nowiki><br />\n", devicetype, num_notes, num_notes, - devicetype, num_notes, boards[i].note); - if (ret < 0 || (unsigned int)ret >= sizeof(tmp)) { - fprintf(stderr, "Footnote text #%d of %s truncated (ret=%d, sizeof(tmp)=%zu)\n", - num_notes, devicetype, ret, sizeof(tmp)); - } - notes = strcat_realloc(notes, tmp); - } else { - printf("\n"); - } - - if (((i % lines_per_col) + 1) == lines_per_col) - printf("\n|}\n\n"); - } - - /* end inner table if it did not fill the last column fully */ - if (((i % lines_per_col)) > 0) - printf("\n|}\n\n"); - printf("|}\n"); - - if (num_notes > 0) - printf("\n<small>\n%s</small>\n", notes); - free(notes); -} - -static void print_supported_boards_wiki(void) -{ - printf("%s", board_intro); - print_supported_boards_wiki_helper("mainboards", 2, boards_known); - - printf("%s", laptop_intro); - print_supported_boards_wiki_helper("mobile devices", 1, laptops_known); -} -#endif - -static void print_supported_chips_wiki(int cols) -{ - unsigned int lines_per_col; - char *s; - char vmax[6]; - char vmin[6]; - const struct flashchip *f, *old = NULL; - int i = 0, c = 1, chipcount = 0; - - for (f = flashchips; f->name != NULL; f++) { - /* Don't count generic entries. */ - if (!strncmp(f->vendor, "Unknown", 7) || - !strncmp(f->vendor, "Programmer", 10) || - !strncmp(f->name, "unknown", 7)) - continue; - chipcount++; - } - - /* +1 to force the resulting number of columns to be < cols */ - lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0); - - printf("%s", chip_intro); - printf("\nTotal amount of supported chips: '''%d'''\n\n" - "{| border="0" valign="top"\n", chipcount); - - for (f = flashchips; f->name != NULL; f++) { - /* Don't print generic entries. */ - if (!strncmp(f->vendor, "Unknown", 7) || - !strncmp(f->vendor, "Programmer", 10) || - !strncmp(f->name, "unknown", 7)) - continue; - - if ((i % lines_per_col) == 0) - printf("%s%s", th_start, chip_th); - - /* Alternate colors if the vendor changes. */ - if (old != NULL && strcmp(old->vendor, f->vendor)) - c = !c; - - old = f; - s = flashbuses_to_text(f->bustype); - sprintf(vmin, "%0.03f", f->voltage.min / (double)1000); - sprintf(vmax, "%0.03f", f->voltage.max / (double)1000); - printf("|- bgcolor="#%s"\n| %s || %s || align="right" | %d " - "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}" - "|| %s || %s\n", - (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name, - f->total_size, s ? s : "?", - test_state_to_template(f->tested.probe), - test_state_to_template(f->tested.read), - test_state_to_template(f->tested.erase), - test_state_to_template(f->tested.write), - f->voltage.min ? vmin : "?", - f->voltage.max ? vmax : "?"); - free(s); - - if (((i % lines_per_col) + 1) == lines_per_col) - printf("\n|}\n\n"); - i++; - } - /* end inner table if it did not fill the last column fully */ - if (((i % lines_per_col)) > 0) - printf("\n|}\n\n"); - printf("|}\n\n"); -} - -/* Following functions are not needed when no PCI/USB programmers are compiled in, - * but since print_wiki code has no size constraints we include it unconditionally. */ -static int count_supported_devs_wiki(const struct dev_entry *devs) -{ - unsigned int count = 0; - unsigned int i = 0; - for (i = 0; devs[i].vendor_id != 0; i++) - count++; - return count; -} - -static void print_supported_devs_wiki_helper(const struct programmer_entry *const prog) -{ - int i = 0; - static int c = 0; - const struct dev_entry *devs = prog->devs.dev; - const unsigned int count = count_supported_devs_wiki(devs); - - /* Alternate colors if the vendor changes. */ - c = !c; - - for (i = 0; devs[i].vendor_id != 0; i++) { - printf("|- bgcolor="#%s"\n", (c) ? "eeeeee" : "dddddd"); - if (i == 0) - printf("| rowspan="%u" | %s |", count, prog->name); - printf("| %s || %s || %04x:%04x || {{%s}}\n", devs[i].vendor_name, devs[i].device_name, - devs[i].vendor_id, devs[i].device_id, test_state_to_template(devs[i].status)); - } -} - -static void print_supported_devs_wiki() -{ - unsigned int pci_count = 0; - unsigned int usb_count = 0; - unsigned int i; - - for (i = 0; i < programmer_table_size; i++) { - const struct programmer_entry *const prog = programmer_table[i]; - switch (prog->type) { - case USB: - usb_count += count_supported_devs_wiki(prog->devs.dev); - break; - case PCI: - pci_count += count_supported_devs_wiki(prog->devs.dev); - break; - case OTHER: - default: - break; - } - } - - printf("\n== PCI Devices ==\n\n" - "Total amount of supported PCI devices flashrom can use as a programmer: '''%d'''\n\n" - "{%s%s", pci_count, th_start, programmer_th); - - for (i = 0; i < programmer_table_size; i++) { - const struct programmer_entry *const prog = programmer_table[i]; - if (prog->type == PCI) { - print_supported_devs_wiki_helper(prog); - } - } - printf("\n|}\n\n|}\n"); - - printf("\n== USB Devices ==\n\n" - "Total amount of supported USB devices flashrom can use as a programmer: '''%d'''\n\n" - "{%s%s", usb_count, th_start, programmer_th); - - for (i = 0; i < programmer_table_size; i++) { - const struct programmer_entry *const prog = programmer_table[i]; - if (prog->type == USB) { - print_supported_devs_wiki_helper(prog); - } - } - printf("\n|}\n\n|}\n"); - - printf("\n== Other programmers ==\n\n" - "{%s", th_start); - printf("! align="left" | Programmer\n" - "! align="left" | Note\n\n"); - - for (i = 0; i < programmer_table_size; i++) { - static int c = 0; - const struct programmer_entry *const prog = programmer_table[i]; - if (prog->type == OTHER && prog->devs.note != NULL) { - c = !c; - printf("|- bgcolor="#%s"\n", (c) ? "eeeeee" : "dddddd"); - printf("| %s || %s", prog->name, prog->devs.note); - } - } - printf("\n|}\n\n|}\n"); -} - -void print_supported_wiki(void) -{ - time_t t = time(NULL); - char buf[sizeof("1986-02-28T12:37:42Z")]; - strftime(buf, sizeof(buf), "%Y-%m-%dT%H:%M:%SZ", gmtime(&t)); - - printf(wiki_header, buf, flashrom_version); - print_supported_chips_wiki(2); -#if CONFIG_INTERNAL == 1 - print_supported_chipsets_wiki(3); - print_supported_boards_wiki(); -#endif - print_supported_devs_wiki(); -}
-
Anastasia Klimchuk (Code Review)