Anastasia Klimchuk has uploaded this change for review.
tree: Remove print_wiki.c
Old wiki website is retired and so is print_wiki.c
Change-Id: I9990add27f7fdddc23ddd1f33306566ce7548417
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
---
M cli_classic.c
M doc/classic_cli_manpage.rst
M include/flash.h
M include/programmer.h
M known_boards.c
M meson.build
M meson_options.txt
D print_wiki.c
8 files changed, 2 insertions(+), 508 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/41/83941/1
diff --git a/cli_classic.c b/cli_classic.c
index ffded5f..3343438 100644
--- a/cli_classic.c
+++ b/cli_classic.c
@@ -51,9 +51,6 @@
bool read_it, extract_it, write_it, erase_it, verify_it;
bool dont_verify_it, dont_verify_all;
bool list_supported;
-#if CONFIG_PRINT_WIKI == 1
- bool list_supported_wiki;
-#endif
char *filename;
const struct programmer_entry *prog;
@@ -81,9 +78,6 @@
static void cli_classic_usage(const char *name)
{
printf("Usage: %s [-h|-R|-L|"
-#if CONFIG_PRINT_WIKI == 1
- "-z|"
-#endif
"\n\t-p <programmername>[:<parameters>] [-c <chipname>]\n"
"\t\t(--flash-name|--flash-size|\n"
"\t\t [-E|-x|(-r|-w|-v) <file>]\n"
@@ -124,16 +118,10 @@
" -o | --output <logfile> log output to <logfile>\n"
" --flash-contents <ref-file> assume flash contents to be <ref-file>\n"
" -L | --list-supported print supported devices\n"
-#if CONFIG_PRINT_WIKI == 1
- " -z | --list-supported-wiki print supported devices in wiki syntax\n"
-#endif
" --progress show progress percentage on the standard output\n"
" -p | --programmer <name>[:<param>] specify the programmer device. One of\n");
list_programmers_linebreak(4, 80, 0);
printf(".\n\nYou can specify one of -h, -R, -L, "
-#if CONFIG_PRINT_WIKI == 1
- "-z, "
-#endif
"-E, -r, -w, -v or no operation.\n"
"If no operation is specified, flashrom will only probe for flash chips.\n");
}
@@ -754,15 +742,6 @@
cli_classic_validate_singleop(&operation_specified);
options->list_supported = true;
break;
- case 'z':
-#if CONFIG_PRINT_WIKI == 1
- cli_classic_validate_singleop(&operation_specified);
- options->list_supported_wiki = true;
-#else
- cli_classic_abort_usage("Error: Wiki output was not "
- "compiled in. Aborting.\n");
-#endif
- break;
case 'p':
if (options->prog != NULL) {
cli_classic_abort_usage("Error: --programmer specified "
@@ -895,7 +874,6 @@
{"wp-enable", 0, NULL, OPTION_WP_ENABLE},
{"wp-disable", 0, NULL, OPTION_WP_DISABLE},
{"list-supported", 0, NULL, 'L'},
- {"list-supported-wiki", 0, NULL, 'z'},
{"programmer", 1, NULL, 'p'},
{"help", 0, NULL, 'h'},
{"version", 0, NULL, 'R'},
@@ -934,13 +912,6 @@
if (options.logfile && open_logfile(options.logfile))
cli_classic_abort_usage(NULL);
-#if CONFIG_PRINT_WIKI == 1
- if (options.list_supported_wiki) {
- print_supported_wiki();
- goto out;
- }
-#endif
-
if (options.list_supported) {
if (print_supported())
ret = 1;
diff --git a/doc/classic_cli_manpage.rst b/doc/classic_cli_manpage.rst
index d8380c7..932f4c9 100644
--- a/doc/classic_cli_manpage.rst
+++ b/doc/classic_cli_manpage.rst
@@ -11,7 +11,7 @@
SYNOPSIS
--------
-| **flashrom** [-h|-R|-L|-z|
+| **flashrom** [-h|-R|-L|
| -p <programmername>[:<parameters>] [-c <chipname>]
| (--flash-name|--flash-size|
| [-E|-x|-r <file>|-w <file>|-v <file>]
@@ -39,7 +39,7 @@
OPTIONS
-------
-You can specify one of ``-h``, ``-R``, ``-L``, ``-z``, ``-E``, ``-r``, ``-w``, ``-v`` or no operation.
+You can specify one of ``-h``, ``-R``, ``-L``, ``-E``, ``-r``, ``-w``, ``-v`` or no operation.
If no operation is specified, **flashrom** will only probe for flash chips. It is recommended that if you try **flashrom** the
first time on a system, you run it in probe-only mode and check the output.
Also you are advised to make a backup of your current ROM contents with ``-r`` before you try to write a new image.
@@ -256,12 +256,6 @@
For verification you have to test an ERASE and/or WRITE operation, so make sure you only do that if you have proper means to recover from failure!
-**-z, --list-supported-wiki**
- Same as ``--list-supported``, but outputs the supported hardware in MediaWiki syntax,
- so that it can be easily pasted into the `supported hardware wiki page <https://flashrom.org/Supported_hardware>`_.
- Please note that MediaWiki output is not compiled in by default.
-
-
**-p, --programmer <name>[:parameter[,parameter[,parameter]]]**
Specify the programmer device. This is mandatory for all operations involving any chip access (probe/read/write/...).
Currently supported are:
diff --git a/include/flash.h b/include/flash.h
index aa89409..d9a20ad 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -606,7 +606,6 @@
/* print.c */
int print_supported(void);
-void print_supported_wiki(void);
/* helpers.c */
uint32_t address_to_bits(uint32_t addr);
diff --git a/include/programmer.h b/include/programmer.h
index a90624b..77e79ae 100644
--- a/include/programmer.h
+++ b/include/programmer.h
@@ -208,10 +208,8 @@
const char *vendor;
const char *name;
const enum test_state working;
-#ifdef CONFIG_PRINT_WIKI
const char *url;
const char *note;
-#endif
};
extern const struct board_info boards_known[];
diff --git a/known_boards.c b/known_boards.c
index afc6992..c412b8f 100644
--- a/known_boards.c
+++ b/known_boards.c
@@ -18,12 +18,7 @@
#include "programmer.h"
-
-#ifdef CONFIG_PRINT_WIKI
#define B(vendor, name, status, url, note) { vendor, name, status, url, note }
-#else
-#define B(vendor, name, status, url, note) { vendor, name, status }
-#endif
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_known[] = {
diff --git a/meson.build b/meson.build
index ae56b26..85d69b8 100644
--- a/meson.build
+++ b/meson.build
@@ -61,7 +61,6 @@
add_project_arguments('-DFLASHROM_VERSION="' + flashrom_version + '"', language : 'c')
# get defaults from configure
-config_print_wiki= get_option('classic_cli_print_wiki')
config_default_programmer_name = get_option('default_programmer_name')
config_default_programmer_args = get_option('default_programmer_args')
@@ -623,15 +622,6 @@
endif
endforeach
-if config_print_wiki.enabled()
- if get_option('classic_cli').disabled()
- error('`classic_cli_print_wiki` can not be enabled without `classic_cli`')
- else
- srcs += files('print_wiki.c')
- cargs += '-DCONFIG_PRINT_WIKI=1'
- endif
-endif
-
if config_default_programmer_name != ''
cargs += '-DCONFIG_DEFAULT_PROGRAMMER_NAME=&programmer_' + config_default_programmer_name
else
diff --git a/meson_options.txt b/meson_options.txt
index 8a04114..0f56e26 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -1,5 +1,4 @@
option('classic_cli', type : 'feature', value : 'enabled', description : 'classic flashrom cli binary')
-option('classic_cli_print_wiki', type : 'feature', value : 'disabled', description : 'Print Wiki')
option('default_programmer_name', type : 'string', description : 'default programmer')
option('default_programmer_args', type : 'string', description : 'default programmer arguments')
option('ich_descriptors_tool', type : 'feature', value : 'auto', description : 'Build ich_descriptors_tool')
diff --git a/print_wiki.c b/print_wiki.c
deleted file mode 100644
index a0cade9..0000000
--- a/print_wiki.c
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * This file is part of the flashrom project.
- *
- * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
- * Copyright (C) 2009 Carl-Daniel Hailfinger
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <time.h>
-#include "flash.h"
-#include "flashchips.h"
-#include "programmer.h"
-
-static const char wiki_header[] = "= Supported devices =\n\n\
-<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
-background-color:#eeeeee; text-align:left; border:1px solid #aabbcc;\">\
-<small>\n\
-'''Last update:''' %s (generated by flashrom %s)<br />\n\
-The tables below are generated from flashrom's source by copying the output of '''flashrom -z'''.<br /><br />\n\
-A short explanation of the cells representing the support state follows:<br />\n\
-{| border=\"0\" valign=\"top\"\n\
-! style=\"text-align:left;\" |\n\
-! style=\"text-align:left;\" |\n\
-|-\n\
-|{{OK}}\n\
-| The feature was '''tested and should work''' in general unless there is a bug in flashrom or another component in \
-the system prohibits some functionality.\n\
-|-\n\
-|{{Dep}}\n\
-| '''Configuration-dependent'''. The feature was tested and should work in general but there are common \
-configurations that drastically limit flashrom's capabilities or make it completely stop working.\n\
-|-\n\
-|{{?3}}\n\
-| The feature is '''untested''' but believed to be working.\n\
-|-\n\
-|{{NA}}\n\
-| The feature is '''not applicable''' in this configuration (e.g. write operations on ROM chips).\n\
-|-\n\
-|{{No}}\n\
-| The feature is '''known to not work'''. Don't bother testing (nor reporting. Patches welcome! ;).\n\
-|}\n\
-</small></div>\n";
-
-static const char th_start[] = "| valign=\"top\"|\n\n\
-{| border=\"0\" style=\"font-size: smaller\" valign=\"top\"\n\
-|- bgcolor=\"#6699dd\"\n";
-
-#if CONFIG_INTERNAL == 1
-static const char chipset_th[] = "\
-! align=\"left\" | Vendor\n\
-! align=\"left\" | Southbridge\n\
-! align=\"center\" | PCI IDs\n\
-! align=\"center\" | Status\n\n";
-
-static const char board_th[] = "\
-! align=\"left\" | Vendor\n\
-! align=\"left\" | Mainboard\n\
-! align=\"left\" | Required option\n\
-! align=\"center\" | Status\n\n";
-
-static const char board_intro[] = "\
-\n== Supported mainboards ==\n\n\
-In general, it is very likely that flashrom works out of the box even if your \
-mainboard is not listed below.\n\nThis is a list of mainboards where we have \
-verified that they either do or do not need any special initialization to \
-make flashrom work (given flashrom supports the respective chipset and flash \
-chip), or that they do not yet work at all. If they do not work, support may \
-or may not be added later.\n\n\
-Mainboards (or individual revisions) which don't appear in the list may or may \
-not work (we don't know, someone has to give it a try). Please report any \
-further verified mainboards on the [[Contact#Mailing_List|mailing list]].\n";
-#endif
-
-static const char chip_th[] = "\
-! align=\"left\" | Vendor\n\
-! align=\"left\" | Device\n\
-! align=\"center\" | Size [kB]\n\
-! align=\"center\" | Type\n\
-! align=\"center\" colspan=\"4\" | Status\n\
-! align=\"center\" colspan=\"2\" | Voltage [V]\n\n\
-|- bgcolor=\"#6699ff\"\n| colspan=\"4\" | \n\
-| Probe\n| Read\n| Erase\n| Write\n\
-| align=\"center\" | Min\n| align=\"center\" | Max\n\n";
-
-static const char chip_intro[] = "\
-\n== Supported flash chips ==\n\n\
-The list below contains all chips that have some kind of explicit support added to flashrom and their last \
-known test status. Newer SPI flash chips might work even without explicit support if they implement SFDP ([\
-http://www.jedec.org/standards-documents/docs/jesd216 Serial Flash Discoverable Parameters - JESD216]). \
-Flashrom will detect this automatically and inform you about it.\n\n\
-The names used below are designed to be as concise as possible and hence contain only the characters \
-describing properties that are relevant to flashrom. Irrelevant characters specify attributes flashrom can not \
-use or even detect by itself (e.g. the physical package) and have no effect on flashrom's operation. They are \
-replaced by dots ('.') functioning as wildcards (like in Regular Expressions) or are completely omitted at the \
-end of a name.\n";
-
-static const char programmer_th[] = "\
-! align=\"left\" | Programmer\n\
-! align=\"left\" | Vendor\n\
-! align=\"left\" | Device\n\
-! align=\"center\" | IDs\n\
-! align=\"center\" | Status\n\n";
-
-/* The output of this module relies on MediaWiki templates to select special formatting styles for table cells
- * reflecting the test status of the respective hardware. This functions returns the correct template name for
- * the supplied enum test_state. */
-static const char *test_state_to_template(enum test_state test_state)
-{
- switch (test_state) {
- case OK: return "OK";
- case BAD: return "No";
- case NA: return "NA";
- case DEP: return "Dep";
- case NT:
- default: return "?3";
- }
-}
-
-#if CONFIG_INTERNAL == 1
-static const char laptop_intro[] = "\n== Supported mobile devices (laptops, tablets etc.) ==\n\n\
-In general, flashing mobile devices is more difficult because they\n\n\
-* often use the flash chip for stuff besides the BIOS,\n\
-* often have special protection stuff which has to be handled by flashrom,\n\
-* often use flash translation circuits which need drivers in flashrom.\n\n\
-<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
-background-color:#ff6666; align:right; border:1px solid #000000;\">\n\
-'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \
-untested mobile devices unless you have a means to recover from a flashing that goes \
-wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
-
-static void print_supported_chipsets_wiki(int cols)
-{
- int i;
- unsigned int lines_per_col;
- const struct penable *e;
- int enablescount = 0, color = 1;
-
- for (e = chipset_enables; e->vendor_name != NULL; e++)
- enablescount++;
-
- /* +1 to force the resulting number of columns to be < cols */
- lines_per_col = enablescount / cols + ((enablescount%cols) > 0 ? 1 : 0);
-
- printf("\n== Supported chipsets ==\n\nTotal amount of supported chipsets: '''%d'''\n\n"
- "{| border=\"0\" valign=\"top\"\n", enablescount);
-
- e = chipset_enables;
- for (i = 0; e[i].vendor_name != NULL; i++) {
- if ((i % lines_per_col) == 0)
- printf("%s%s", th_start, chipset_th);
-
- /* Alternate colors if the vendor changes. */
- if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name))
- color = !color;
-
- printf("|- bgcolor=\"#%s\"\n| %s || %s "
- "|| %04x:%04x || {{%s}}\n", (color) ? "eeeeee" : "dddddd",
- e[i].vendor_name, e[i].device_name,
- e[i].vendor_id, e[i].device_id,
- test_state_to_template(e[i].status));
-
- if (((i % lines_per_col) + 1) == lines_per_col)
- printf("\n|}\n\n");
- }
-
- /* end inner table if it did not fill the last column fully */
- if (((i % lines_per_col)) > 0)
- printf("\n|}\n\n");
- printf("\n\n|}\n");
-}
-
-static void print_supported_boards_wiki_helper(const char *devicetype, int cols, const struct board_info boards[])
-{
- int i, k;
- unsigned int boardcount, lines_per_col;
- unsigned int boardcount_good = 0, boardcount_bad = 0, boardcount_nt = 0;
- int num_notes = 0, color = 1;
- char *notes = calloc(1, 1);
- char tmp[900 + 1];
- const struct board_match *b = board_matches;
-
- for (i = 0; boards[i].vendor != NULL; i++) {
- if (boards[i].working == OK)
- boardcount_good++;
- else if (boards[i].working == NT)
- boardcount_nt++;
- else
- boardcount_bad++;
- }
- boardcount = boardcount_good + boardcount_nt + boardcount_bad;
-
- /* +1 to force the resulting number of columns to be < cols */
- lines_per_col = boardcount / cols + ((boardcount%cols) > 0 ? 1 : 0);
-
- printf("\n\nTotal amount of known good %s: '''%d'''; "
- "Untested (e.g. user vanished before testing new code): '''%d'''; "
- "Not yet supported (i.e. known-bad): '''%d'''.\n\n"
- "{| border=\"0\" valign=\"top\"\n", devicetype, boardcount_good, boardcount_nt, boardcount_bad);
-
- for (i = 0; boards[i].vendor != NULL; i++) {
- if ((i % lines_per_col) == 0)
- printf("%s%s", th_start, board_th);
-
- /* Alternate colors if the vendor changes. */
- if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor))
- color = !color;
-
- k = 0;
- while ((b[k].vendor_name != NULL) &&
- (strcmp(b[k].vendor_name, boards[i].vendor) ||
- strcmp(b[k].board_name, boards[i].name))) {
- k++;
- }
-
- printf("|- bgcolor=\"#%s\"\n| %s || %s%s %s%s || %s%s%s%s "
- "|| {{%s}}", (color) ? "eeeeee" : "dddddd",
- boards[i].vendor,
- boards[i].url ? "[" : "",
- boards[i].url ? boards[i].url : "",
- boards[i].name,
- boards[i].url ? "]" : "",
- b[k].lb_vendor ? "-p internal:mainboard=" : "—",
- b[k].lb_vendor ? b[k].lb_vendor : "",
- b[k].lb_vendor ? ":" : "",
- b[k].lb_vendor ? b[k].lb_part : "",
- test_state_to_template(boards[i].working));
-
- if (boards[i].note) {
- num_notes++;
- printf(" <span id=\"%s_ref%d\"><sup>[[#%s_note%d|%d]]</sup></span>\n",
- devicetype, num_notes, devicetype, num_notes, num_notes);
- int ret = snprintf(tmp, sizeof(tmp),
- "<span id=\"%s_note%d\">%d. [[#%s_ref%d|↑]]</span>"
- " <nowiki>%s</nowiki><br />\n", devicetype, num_notes, num_notes,
- devicetype, num_notes, boards[i].note);
- if (ret < 0 || (unsigned int)ret >= sizeof(tmp)) {
- fprintf(stderr, "Footnote text #%d of %s truncated (ret=%d, sizeof(tmp)=%zu)\n",
- num_notes, devicetype, ret, sizeof(tmp));
- }
- notes = strcat_realloc(notes, tmp);
- } else {
- printf("\n");
- }
-
- if (((i % lines_per_col) + 1) == lines_per_col)
- printf("\n|}\n\n");
- }
-
- /* end inner table if it did not fill the last column fully */
- if (((i % lines_per_col)) > 0)
- printf("\n|}\n\n");
- printf("|}\n");
-
- if (num_notes > 0)
- printf("\n<small>\n%s</small>\n", notes);
- free(notes);
-}
-
-static void print_supported_boards_wiki(void)
-{
- printf("%s", board_intro);
- print_supported_boards_wiki_helper("mainboards", 2, boards_known);
-
- printf("%s", laptop_intro);
- print_supported_boards_wiki_helper("mobile devices", 1, laptops_known);
-}
-#endif
-
-static void print_supported_chips_wiki(int cols)
-{
- unsigned int lines_per_col;
- char *s;
- char vmax[6];
- char vmin[6];
- const struct flashchip *f, *old = NULL;
- int i = 0, c = 1, chipcount = 0;
-
- for (f = flashchips; f->name != NULL; f++) {
- /* Don't count generic entries. */
- if (!strncmp(f->vendor, "Unknown", 7) ||
- !strncmp(f->vendor, "Programmer", 10) ||
- !strncmp(f->name, "unknown", 7))
- continue;
- chipcount++;
- }
-
- /* +1 to force the resulting number of columns to be < cols */
- lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0);
-
- printf("%s", chip_intro);
- printf("\nTotal amount of supported chips: '''%d'''\n\n"
- "{| border=\"0\" valign=\"top\"\n", chipcount);
-
- for (f = flashchips; f->name != NULL; f++) {
- /* Don't print generic entries. */
- if (!strncmp(f->vendor, "Unknown", 7) ||
- !strncmp(f->vendor, "Programmer", 10) ||
- !strncmp(f->name, "unknown", 7))
- continue;
-
- if ((i % lines_per_col) == 0)
- printf("%s%s", th_start, chip_th);
-
- /* Alternate colors if the vendor changes. */
- if (old != NULL && strcmp(old->vendor, f->vendor))
- c = !c;
-
- old = f;
- s = flashbuses_to_text(f->bustype);
- sprintf(vmin, "%0.03f", f->voltage.min / (double)1000);
- sprintf(vmax, "%0.03f", f->voltage.max / (double)1000);
- printf("|- bgcolor=\"#%s\"\n| %s || %s || align=\"right\" | %d "
- "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}"
- "|| %s || %s\n",
- (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
- f->total_size, s ? s : "?",
- test_state_to_template(f->tested.probe),
- test_state_to_template(f->tested.read),
- test_state_to_template(f->tested.erase),
- test_state_to_template(f->tested.write),
- f->voltage.min ? vmin : "?",
- f->voltage.max ? vmax : "?");
- free(s);
-
- if (((i % lines_per_col) + 1) == lines_per_col)
- printf("\n|}\n\n");
- i++;
- }
- /* end inner table if it did not fill the last column fully */
- if (((i % lines_per_col)) > 0)
- printf("\n|}\n\n");
- printf("|}\n\n");
-}
-
-/* Following functions are not needed when no PCI/USB programmers are compiled in,
- * but since print_wiki code has no size constraints we include it unconditionally. */
-static int count_supported_devs_wiki(const struct dev_entry *devs)
-{
- unsigned int count = 0;
- unsigned int i = 0;
- for (i = 0; devs[i].vendor_id != 0; i++)
- count++;
- return count;
-}
-
-static void print_supported_devs_wiki_helper(const struct programmer_entry *const prog)
-{
- int i = 0;
- static int c = 0;
- const struct dev_entry *devs = prog->devs.dev;
- const unsigned int count = count_supported_devs_wiki(devs);
-
- /* Alternate colors if the vendor changes. */
- c = !c;
-
- for (i = 0; devs[i].vendor_id != 0; i++) {
- printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd");
- if (i == 0)
- printf("| rowspan=\"%u\" | %s |", count, prog->name);
- printf("| %s || %s || %04x:%04x || {{%s}}\n", devs[i].vendor_name, devs[i].device_name,
- devs[i].vendor_id, devs[i].device_id, test_state_to_template(devs[i].status));
- }
-}
-
-static void print_supported_devs_wiki()
-{
- unsigned int pci_count = 0;
- unsigned int usb_count = 0;
- unsigned int i;
-
- for (i = 0; i < programmer_table_size; i++) {
- const struct programmer_entry *const prog = programmer_table[i];
- switch (prog->type) {
- case USB:
- usb_count += count_supported_devs_wiki(prog->devs.dev);
- break;
- case PCI:
- pci_count += count_supported_devs_wiki(prog->devs.dev);
- break;
- case OTHER:
- default:
- break;
- }
- }
-
- printf("\n== PCI Devices ==\n\n"
- "Total amount of supported PCI devices flashrom can use as a programmer: '''%d'''\n\n"
- "{%s%s", pci_count, th_start, programmer_th);
-
- for (i = 0; i < programmer_table_size; i++) {
- const struct programmer_entry *const prog = programmer_table[i];
- if (prog->type == PCI) {
- print_supported_devs_wiki_helper(prog);
- }
- }
- printf("\n|}\n\n|}\n");
-
- printf("\n== USB Devices ==\n\n"
- "Total amount of supported USB devices flashrom can use as a programmer: '''%d'''\n\n"
- "{%s%s", usb_count, th_start, programmer_th);
-
- for (i = 0; i < programmer_table_size; i++) {
- const struct programmer_entry *const prog = programmer_table[i];
- if (prog->type == USB) {
- print_supported_devs_wiki_helper(prog);
- }
- }
- printf("\n|}\n\n|}\n");
-
- printf("\n== Other programmers ==\n\n"
- "{%s", th_start);
- printf("! align=\"left\" | Programmer\n"
- "! align=\"left\" | Note\n\n");
-
- for (i = 0; i < programmer_table_size; i++) {
- static int c = 0;
- const struct programmer_entry *const prog = programmer_table[i];
- if (prog->type == OTHER && prog->devs.note != NULL) {
- c = !c;
- printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd");
- printf("| %s || %s", prog->name, prog->devs.note);
- }
- }
- printf("\n|}\n\n|}\n");
-}
-
-void print_supported_wiki(void)
-{
- time_t t = time(NULL);
- char buf[sizeof("1986-02-28T12:37:42Z")];
- strftime(buf, sizeof(buf), "%Y-%m-%dT%H:%M:%SZ", gmtime(&t));
-
- printf(wiki_header, buf, flashrom_version);
- print_supported_chips_wiki(2);
-#if CONFIG_INTERNAL == 1
- print_supported_chipsets_wiki(3);
- print_supported_boards_wiki();
-#endif
- print_supported_devs_wiki();
-}
To view, visit change 83941. To unsubscribe, or for help writing mail filters, visit settings.