[S] Change in flashrom[master]: flashchips.c: remove WREN from GD25Q256D enter 4BA sequence

[Nikolai Artemiev (Code Review)]

Nikolai Artemiev has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/70342 )

Change subject: flashchips.c: remove WREN from GD25Q256D enter 4BA sequence
......................................................................

flashchips.c: remove WREN from GD25Q256D enter 4BA sequence

As noted in a comment on CB:35480, the GD25Q256D datasheet indicates
that the chip does not requre a WREN command to enter 4BA mode.

Testing has confirmed that a WREN command is not requried, so change the
flashchip feature flags from FEATURE_4BA_WREN to FEATURE_4BA.

Coreboot issue: https://ticket.coreboot.org/issues/356

BUG=none
BRANCH=none
TEST=read/write/erase/verify GD25Q256D flash with FT2232H programmer

Change-Id: I96e48933f33c52c0d10a0d4cb7f7e07c1fceab99
Signed-off-by: Nikolai Artemiev 
---
M flashchips.c
1 file changed, 23 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/42/70342/1

diff --git a/flashchips.c b/flashchips.c
index 6f65389..7ea8601 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -6849,7 +6849,7 @@
    	.model_id	= GIGADEVICE_GD25Q256D,
    	.total_size	= 32768,
    	.page_size	= 256,
-		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN |
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA |
    			  FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3,
    	.tested		= TEST_OK_PREWB,
    	.probe		= PROBE_SPI_RDID,