- flashrom-gerrit - mail.coreboot.org

[L] Change in flashrom[main]: doc: Convert doc for ft2232_spi
by Anastasia Klimchuk (Code Review) 17 Aug '24

17 Aug '24

Attention is currently required from: Michael Niewöhner. Anastasia Klimchuk has posted comments on this change by Anastasia Klimchuk. ( https://review.coreboot.org/c/flashrom/+/83866?usp=email ) Change subject: doc: Convert doc for ft2232_spi ...................................................................... Patch Set 1: (1 comment) Patchset: PS1: Michael, would you agree to review this doc? I am asking you because I looked through commit history for ft2232_spi, and you have been adding a few features in the recent times. I think you have the knowledge and can help to review this doc. This is a part of the effort to move documentation in the tree. The end result will be also published on the website here: https://flashrom.org/supported_hw/supported_prog/index.html You can add any comments, if you see something is outdated, or incorrect. You are also very welcome to add new info here. Thank you! -- To view, visit https://review.coreboot.org/c/flashrom/+/83866?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Id30b6c92838d7ca6e26a4cc3e0aeeb3f3ce07668 Gerrit-Change-Number: 83866 Gerrit-PatchSet: 1 Gerrit-Owner: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Michael Niewöhner <foss(a)mniewoehner.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Michael Niewöhner <foss(a)mniewoehner.de> Gerrit-Comment-Date: Sat, 17 Aug 2024 13:15:47 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[M] Change in flashrom[main]: flashchips: add GD25LF512MF model
by Anastasia Klimchuk (Code Review) 17 Aug '24

17 Aug '24

Attention is currently required from: Nikolai Artemiev, Stefan Reinauer, Victor Lim. Anastasia Klimchuk has posted comments on this change by Victor Lim. ( https://review.coreboot.org/c/flashrom/+/83912?usp=email ) Change subject: flashchips: add GD25LF512MF model ...................................................................... Patch Set 1: Code-Review+2 (1 comment) Commit Message: https://review.coreboot.org/c/flashrom/+/83912/comment/89ab2a94_68f022d1?us… : PS1, Line 10: I will have to send you the datasheet through email. I got the datasheet thank you! I did the review, all good. You can remove this line from commit message. -- To view, visit https://review.coreboot.org/c/flashrom/+/83912?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I3d202f5afcc9c33a4040f8186dc6fef1878ba79a Gerrit-Change-Number: 83912 Gerrit-PatchSet: 1 Gerrit-Owner: Victor Lim <vlim(a)gigadevice.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Victor Lim <vlim(a)gigadevice.com> Gerrit-Attention: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Attention: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Comment-Date: Sat, 17 Aug 2024 10:06:06 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes

1 0

[M] Change in flashrom[main]: flashchips: adding GD25LB512MF/GD25LR512MF
by Anastasia Klimchuk (Code Review) 17 Aug '24

17 Aug '24

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/83899?usp=email ) Change subject: flashchips: adding GD25LB512MF/GD25LR512MF ...................................................................... flashchips: adding GD25LB512MF/GD25LR512MF GD25LB512MF: 1.8V 512Mbit shipped with Quad enabled. https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20231213/DS-0… GD25LR512MF: all GD25LB512MF features + RPMC feature The datasheet is identical with GD25LB512MF for the NOR flash side. Tested both models on ch347 with erase, read, write, and protection. Change-Id: I6a0061a43af5966c93c95645b51a640c00f3d829 Signed-off-by: Victor Lim <vlim(a)gigadevice.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/83899 Reviewed-by: Anastasia Klimchuk <aklm(a)chromium.org> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M flashchips.c M include/flashchips.h 2 files changed, 57 insertions(+), 0 deletions(-) Approvals: build bot (Jenkins): Verified Anastasia Klimchuk: Looks good to me, approved diff --git a/flashchips.c b/flashchips.c index 134c3d5..e6b4761 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7067,6 +7067,62 @@ }, { + .vendor = "GigaDevice", + .name = "GD25LB512MF/GD25LR512MF", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25LB512MF, + .total_size = 65536, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_WRSR_EXT2 | FEATURE_4BA, + .tested = TEST_OK_PREWB, + .probe = PROBE_SPI_RDID, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16384} }, + .block_erase = SPI_BLOCK_ERASE_21, + }, { + .eraseblocks = { {4 * 1024, 16384} }, + .block_erase = SPI_BLOCK_ERASE_20, + }, { + .eraseblocks = { {32 * 1024, 2048} }, + .block_erase = SPI_BLOCK_ERASE_5C, + }, { + .eraseblocks = { {32 * 1024, 2048} }, + .block_erase = SPI_BLOCK_ERASE_52, + }, { + .eraseblocks = { {64 * 1024, 1024} }, + .block_erase = SPI_BLOCK_ERASE_DC, + }, { + .eraseblocks = { {64 * 1024, 1024} }, + .block_erase = SPI_BLOCK_ERASE_D8, + }, { + .eraseblocks = { {64 * 1024 * 1024, 1} }, + .block_erase = SPI_BLOCK_ERASE_60, + }, { + .eraseblocks = { {64 * 1024 * 1024, 1} }, + .block_erase = SPI_BLOCK_ERASE_C7, + } + }, + .printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP4_SRWD, + .unlock = SPI_DISABLE_BLOCKPROTECT_BP4_SRWD, + .write = SPI_CHIP_WRITE256, + .read = SPI_CHIP_READ, + .voltage = {1695, 1950}, + .reg_bits = + { + .srp = {STATUS1, 7, RW}, + .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}}, + .tb = {STATUS1, 6, RW}, /* Called BP4 in datasheet, acts like TB */ + .srl = {STATUS2, 0, RW}, + .cmp = {STATUS2, 6, RW}, + }, + .decode_range = DECODE_RANGE_SPI25, + }, + + { .vendor = "GigaDevice", .name = "GD25LB512ME/GD25LR512ME", .bustype = BUS_SPI, diff --git a/include/flashchips.h b/include/flashchips.h index f675e4c..d5c0027 100644 --- a/include/flashchips.h +++ b/include/flashchips.h @@ -404,6 +404,7 @@ #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128CD 0x6018 #define GIGADEVICE_GD25LQ255E 0x6019 +#define GIGADEVICE_GD25LB512MF 0x601A /* Same as GD25LR512MF */ #define GIGADEVICE_GD25LF128E 0x6318 #define GIGADEVICE_GD25LF256F 0x6319 #define GIGADEVICE_GD25LR256E 0x6719 -- To view, visit https://review.coreboot.org/c/flashrom/+/83899?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I6a0061a43af5966c93c95645b51a640c00f3d829 Gerrit-Change-Number: 83899 Gerrit-PatchSet: 3 Gerrit-Owner: Victor Lim <vlim(a)gigadevice.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

[S] Change in flashrom[main]: flashchips: add support for MX77U51250F chip
by Anastasia Klimchuk (Code Review) 17 Aug '24

17 Aug '24

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/82626?usp=email ) Change subject: flashchips: add support for MX77U51250F chip ...................................................................... flashchips: add support for MX77U51250F chip Add initial support for Macronix MX77U51250F. BUG=none BRANCH=none TEST= Tested read, write and probe on google/fatcat with internal programmer. Change-Id: I2c2e94f01dc63f60cf636bc6afe1f033e2a6f83c Signed-off-by: Bora Guvendik <bora.guvendik(a)intel.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/82626 Reviewed-by: Anastasia Klimchuk <aklm(a)chromium.org> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: DZ <danielzhang(a)mxic.com.cn> --- M flashchips.c M include/flashchips.h 2 files changed, 39 insertions(+), 0 deletions(-) Approvals: build bot (Jenkins): Verified Anastasia Klimchuk: Looks good to me, approved DZ: Looks good to me, but someone else must approve diff --git a/flashchips.c b/flashchips.c index d566001..134c3d5 100644 --- a/flashchips.c +++ b/flashchips.c @@ -12023,6 +12023,44 @@ .voltage = {2700, 3600}, }, + { + .vendor = "Macronix", + .name = "MX77U51250F", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX77U51250F, + .total_size = 65536, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_CFGR | FEATURE_4BA, + .tested = TEST_OK_PREW, + .probe = PROBE_SPI_RDID, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16384} }, + .block_erase = SPI_BLOCK_ERASE_20, + }, { + .eraseblocks = { {32 * 1024, 2048} }, + .block_erase = SPI_BLOCK_ERASE_52, + }, { + .eraseblocks = { {64 * 1024, 1024} }, + .block_erase = SPI_BLOCK_ERASE_D8, + }, { + .eraseblocks = { {64 * 1024 * 1024, 1} }, + .block_erase = SPI_BLOCK_ERASE_60, + }, { + .eraseblocks = { {64 * 1024 * 1024, 1} }, + .block_erase = SPI_BLOCK_ERASE_C7, + } + }, + .printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* bit6 is quad enable */ + .unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD, + .write = SPI_CHIP_WRITE256, + .read = SPI_CHIP_READ, /* Fast read (0x0B) supported */ + .voltage = {1650, 2000}, + }, + /* The ST M25P05 is a bit of a problem. It has the same ID as the * ST M25P05-A in RES mode, but supports only 128 byte writes instead * of 256 byte writes. We rely heavily on the fact that PROBE_SPI_RES1 diff --git a/include/flashchips.h b/include/flashchips.h index f309a55..f675e4c 100644 --- a/include/flashchips.h +++ b/include/flashchips.h @@ -541,6 +541,7 @@ #define MACRONIX_MX25L6495F 0x9517 #define MACRONIX_MX25L3255E 0x9e16 #define MACRONIX_MX77L25650F 0x7519 +#define MACRONIX_MX77U51250F 0x753A #define MACRONIX_MX25L3239E 0x2536 #define MACRONIX_MX25R1635F 0x2815 -- To view, visit https://review.coreboot.org/c/flashrom/+/82626?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I2c2e94f01dc63f60cf636bc6afe1f033e2a6f83c Gerrit-Change-Number: 82626 Gerrit-PatchSet: 5 Gerrit-Owner: Bora Guvendik <bora.guvendik(a)intel.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: DZ <danielzhang(a)mxic.com.cn> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Subrata Banik <subratabanik(a)google.com>

1 0

[XS] Change in flashrom[main]: doc: Remove leftover reference to building_with_make
by Anastasia Klimchuk (Code Review) 16 Aug '24

16 Aug '24

Anastasia Klimchuk has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/83942?usp=email ) Change subject: doc: Remove leftover reference to building_with_make ...................................................................... doc: Remove leftover reference to building_with_make Change-Id: If6d3580972ea7d42503004b922b90829025bd62d Signed-off-by: Anastasia Klimchuk <aklm(a)flashrom.org> --- M doc/user_docs/example_partial_wp.rst 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/42/83942/1 diff --git a/doc/user_docs/example_partial_wp.rst b/doc/user_docs/example_partial_wp.rst index 67a382a..811c772 100644 --- a/doc/user_docs/example_partial_wp.rst +++ b/doc/user_docs/example_partial_wp.rst @@ -14,8 +14,8 @@ Write-protect manipulation functionality is included in flashrom since release v1.3.0. If for any reasons you need the latest code from head, you might need to build :code:`flashrom` -from scratch. The following docs describe how to do this :doc:`/dev_guide/building_from_source` and -:doc:`/dev_guide/building_with_make`. See also :doc:`/dev_guide/development_guide`. +from scratch. The following doc describe how to do this: :doc:`/dev_guide/building_from_source`. +See also :doc:`/dev_guide/development_guide`. Alternatively, your operating system might provide development version of :code:`flashrom` as a package. -- To view, visit https://review.coreboot.org/c/flashrom/+/83942?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: If6d3580972ea7d42503004b922b90829025bd62d Gerrit-Change-Number: 83942 Gerrit-PatchSet: 1 Gerrit-Owner: Anastasia Klimchuk <aklm(a)chromium.org>

1 0

[L] Change in flashrom[main]: tree: Remove print_wiki.c
by Anastasia Klimchuk (Code Review) 16 Aug '24

16 Aug '24

Anastasia Klimchuk has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/83941?usp=email ) Change subject: tree: Remove print_wiki.c ...................................................................... tree: Remove print_wiki.c Old wiki website is retired and so is print_wiki.c Change-Id: I9990add27f7fdddc23ddd1f33306566ce7548417 Signed-off-by: Anastasia Klimchuk <aklm(a)flashrom.org> --- M cli_classic.c M doc/classic_cli_manpage.rst M include/flash.h M include/programmer.h M known_boards.c M meson.build M meson_options.txt D print_wiki.c 8 files changed, 2 insertions(+), 508 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/41/83941/1 diff --git a/cli_classic.c b/cli_classic.c index ffded5f..3343438 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -51,9 +51,6 @@ bool read_it, extract_it, write_it, erase_it, verify_it; bool dont_verify_it, dont_verify_all; bool list_supported; -#if CONFIG_PRINT_WIKI == 1 - bool list_supported_wiki; -#endif char *filename; const struct programmer_entry *prog; @@ -81,9 +78,6 @@ static void cli_classic_usage(const char *name) { printf("Usage: %s [-h|-R|-L|" -#if CONFIG_PRINT_WIKI == 1 - "-z|" -#endif "\n\t-p <programmername>[:<parameters>] [-c <chipname>]\n" "\t\t(--flash-name|--flash-size|\n" "\t\t [-E|-x|(-r|-w|-v) <file>]\n" @@ -124,16 +118,10 @@ " -o | --output <logfile> log output to <logfile>\n" " --flash-contents <ref-file> assume flash contents to be <ref-file>\n" " -L | --list-supported print supported devices\n" -#if CONFIG_PRINT_WIKI == 1 - " -z | --list-supported-wiki print supported devices in wiki syntax\n" -#endif " --progress show progress percentage on the standard output\n" " -p | --programmer <name>[:<param>] specify the programmer device. One of\n"); list_programmers_linebreak(4, 80, 0); printf(".\n\nYou can specify one of -h, -R, -L, " -#if CONFIG_PRINT_WIKI == 1 - "-z, " -#endif "-E, -r, -w, -v or no operation.\n" "If no operation is specified, flashrom will only probe for flash chips.\n"); } @@ -754,15 +742,6 @@ cli_classic_validate_singleop(&operation_specified); options->list_supported = true; break; - case 'z': -#if CONFIG_PRINT_WIKI == 1 - cli_classic_validate_singleop(&operation_specified); - options->list_supported_wiki = true; -#else - cli_classic_abort_usage("Error: Wiki output was not " - "compiled in. Aborting.\n"); -#endif - break; case 'p': if (options->prog != NULL) { cli_classic_abort_usage("Error: --programmer specified " @@ -895,7 +874,6 @@ {"wp-enable", 0, NULL, OPTION_WP_ENABLE}, {"wp-disable", 0, NULL, OPTION_WP_DISABLE}, {"list-supported", 0, NULL, 'L'}, - {"list-supported-wiki", 0, NULL, 'z'}, {"programmer", 1, NULL, 'p'}, {"help", 0, NULL, 'h'}, {"version", 0, NULL, 'R'}, @@ -934,13 +912,6 @@ if (options.logfile && open_logfile(options.logfile)) cli_classic_abort_usage(NULL); -#if CONFIG_PRINT_WIKI == 1 - if (options.list_supported_wiki) { - print_supported_wiki(); - goto out; - } -#endif - if (options.list_supported) { if (print_supported()) ret = 1; diff --git a/doc/classic_cli_manpage.rst b/doc/classic_cli_manpage.rst index d8380c7..932f4c9 100644 --- a/doc/classic_cli_manpage.rst +++ b/doc/classic_cli_manpage.rst @@ -11,7 +11,7 @@ SYNOPSIS -------- -| **flashrom** [-h|-R|-L|-z| +| **flashrom** [-h|-R|-L| | -p <programmername>[:<parameters>] [-c <chipname>] | (--flash-name|--flash-size| | [-E|-x|-r <file>|-w <file>|-v <file>] @@ -39,7 +39,7 @@ OPTIONS ------- -You can specify one of ``-h``, ``-R``, ``-L``, ``-z``, ``-E``, ``-r``, ``-w``, ``-v`` or no operation. +You can specify one of ``-h``, ``-R``, ``-L``, ``-E``, ``-r``, ``-w``, ``-v`` or no operation. If no operation is specified, **flashrom** will only probe for flash chips. It is recommended that if you try **flashrom** the first time on a system, you run it in probe-only mode and check the output. Also you are advised to make a backup of your current ROM contents with ``-r`` before you try to write a new image. @@ -256,12 +256,6 @@ For verification you have to test an ERASE and/or WRITE operation, so make sure you only do that if you have proper means to recover from failure! -**-z, --list-supported-wiki** - Same as ``--list-supported``, but outputs the supported hardware in MediaWiki syntax, - so that it can be easily pasted into the `supported hardware wiki page <https://flashrom.org/Supported_hardware>`_. - Please note that MediaWiki output is not compiled in by default. - - **-p, --programmer <name>[:parameter[,parameter[,parameter]]]** Specify the programmer device. This is mandatory for all operations involving any chip access (probe/read/write/...). Currently supported are: diff --git a/include/flash.h b/include/flash.h index aa89409..d9a20ad 100644 --- a/include/flash.h +++ b/include/flash.h @@ -606,7 +606,6 @@ /* print.c */ int print_supported(void); -void print_supported_wiki(void); /* helpers.c */ uint32_t address_to_bits(uint32_t addr); diff --git a/include/programmer.h b/include/programmer.h index a90624b..77e79ae 100644 --- a/include/programmer.h +++ b/include/programmer.h @@ -208,10 +208,8 @@ const char *vendor; const char *name; const enum test_state working; -#ifdef CONFIG_PRINT_WIKI const char *url; const char *note; -#endif }; extern const struct board_info boards_known[]; diff --git a/known_boards.c b/known_boards.c index afc6992..c412b8f 100644 --- a/known_boards.c +++ b/known_boards.c @@ -18,12 +18,7 @@ #include "programmer.h" - -#ifdef CONFIG_PRINT_WIKI #define B(vendor, name, status, url, note) { vendor, name, status, url, note } -#else -#define B(vendor, name, status, url, note) { vendor, name, status } -#endif /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info boards_known[] = { diff --git a/meson.build b/meson.build index ae56b26..85d69b8 100644 --- a/meson.build +++ b/meson.build @@ -61,7 +61,6 @@ add_project_arguments('-DFLASHROM_VERSION="' + flashrom_version + '"', language : 'c') # get defaults from configure -config_print_wiki= get_option('classic_cli_print_wiki') config_default_programmer_name = get_option('default_programmer_name') config_default_programmer_args = get_option('default_programmer_args') @@ -623,15 +622,6 @@ endif endforeach -if config_print_wiki.enabled() - if get_option('classic_cli').disabled() - error('`classic_cli_print_wiki` can not be enabled without `classic_cli`') - else - srcs += files('print_wiki.c') - cargs += '-DCONFIG_PRINT_WIKI=1' - endif -endif - if config_default_programmer_name != '' cargs += '-DCONFIG_DEFAULT_PROGRAMMER_NAME=&programmer_' + config_default_programmer_name else diff --git a/meson_options.txt b/meson_options.txt index 8a04114..0f56e26 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -1,5 +1,4 @@ option('classic_cli', type : 'feature', value : 'enabled', description : 'classic flashrom cli binary') -option('classic_cli_print_wiki', type : 'feature', value : 'disabled', description : 'Print Wiki') option('default_programmer_name', type : 'string', description : 'default programmer') option('default_programmer_args', type : 'string', description : 'default programmer arguments') option('ich_descriptors_tool', type : 'feature', value : 'auto', description : 'Build ich_descriptors_tool') diff --git a/print_wiki.c b/print_wiki.c deleted file mode 100644 index a0cade9..0000000 --- a/print_wiki.c +++ /dev/null @@ -1,452 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2009 Uwe Hermann <uwe(a)hermann-uwe.de> - * Copyright (C) 2009 Carl-Daniel Hailfinger - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> -#include <time.h> -#include "flash.h" -#include "flashchips.h" -#include "programmer.h" - -static const char wiki_header[] = "= Supported devices =\n\n\ -<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \ -background-color:#eeeeee; text-align:left; border:1px solid #aabbcc;\">\ -<small>\n\ -'''Last update:''' %s (generated by flashrom %s)<br />\n\ -The tables below are generated from flashrom's source by copying the output of '''flashrom -z'''.<br /><br />\n\ -A short explanation of the cells representing the support state follows:<br />\n\ -{| border=\"0\" valign=\"top\"\n\ -! style=\"text-align:left;\" |\n\ -! style=\"text-align:left;\" |\n\ -|-\n\ -|{{OK}}\n\ -| The feature was '''tested and should work''' in general unless there is a bug in flashrom or another component in \ -the system prohibits some functionality.\n\ -|-\n\ -|{{Dep}}\n\ -| '''Configuration-dependent'''. The feature was tested and should work in general but there are common \ -configurations that drastically limit flashrom's capabilities or make it completely stop working.\n\ -|-\n\ -|{{?3}}\n\ -| The feature is '''untested''' but believed to be working.\n\ -|-\n\ -|{{NA}}\n\ -| The feature is '''not applicable''' in this configuration (e.g. write operations on ROM chips).\n\ -|-\n\ -|{{No}}\n\ -| The feature is '''known to not work'''. Don't bother testing (nor reporting. Patches welcome! ;).\n\ -|}\n\ -</small></div>\n"; - -static const char th_start[] = "| valign=\"top\"|\n\n\ -{| border=\"0\" style=\"font-size: smaller\" valign=\"top\"\n\ -|- bgcolor=\"#6699dd\"\n"; - -#if CONFIG_INTERNAL == 1 -static const char chipset_th[] = "\ -! align=\"left\" | Vendor\n\ -! align=\"left\" | Southbridge\n\ -! align=\"center\" | PCI IDs\n\ -! align=\"center\" | Status\n\n"; - -static const char board_th[] = "\ -! align=\"left\" | Vendor\n\ -! align=\"left\" | Mainboard\n\ -! align=\"left\" | Required option\n\ -! align=\"center\" | Status\n\n"; - -static const char board_intro[] = "\ -\n== Supported mainboards ==\n\n\ -In general, it is very likely that flashrom works out of the box even if your \ -mainboard is not listed below.\n\nThis is a list of mainboards where we have \ -verified that they either do or do not need any special initialization to \ -make flashrom work (given flashrom supports the respective chipset and flash \ -chip), or that they do not yet work at all. If they do not work, support may \ -or may not be added later.\n\n\ -Mainboards (or individual revisions) which don't appear in the list may or may \ -not work (we don't know, someone has to give it a try). Please report any \ -further verified mainboards on the [[Contact#Mailing_List|mailing list]].\n"; -#endif - -static const char chip_th[] = "\ -! align=\"left\" | Vendor\n\ -! align=\"left\" | Device\n\ -! align=\"center\" | Size [kB]\n\ -! align=\"center\" | Type\n\ -! align=\"center\" colspan=\"4\" | Status\n\ -! align=\"center\" colspan=\"2\" | Voltage [V]\n\n\ -|- bgcolor=\"#6699ff\"\n| colspan=\"4\" |  \n\ -| Probe\n| Read\n| Erase\n| Write\n\ -| align=\"center\" | Min\n| align=\"center\" | Max\n\n"; - -static const char chip_intro[] = "\ -\n== Supported flash chips ==\n\n\ -The list below contains all chips that have some kind of explicit support added to flashrom and their last \ -known test status. Newer SPI flash chips might work even without explicit support if they implement SFDP ([\ -http://www.jedec.org/standards-documents/docs/jesd216 Serial Flash Discoverable Parameters - JESD216]). \ -Flashrom will detect this automatically and inform you about it.\n\n\ -The names used below are designed to be as concise as possible and hence contain only the characters \ -describing properties that are relevant to flashrom. Irrelevant characters specify attributes flashrom can not \ -use or even detect by itself (e.g. the physical package) and have no effect on flashrom's operation. They are \ -replaced by dots ('.') functioning as wildcards (like in Regular Expressions) or are completely omitted at the \ -end of a name.\n"; - -static const char programmer_th[] = "\ -! align=\"left\" | Programmer\n\ -! align=\"left\" | Vendor\n\ -! align=\"left\" | Device\n\ -! align=\"center\" | IDs\n\ -! align=\"center\" | Status\n\n"; - -/* The output of this module relies on MediaWiki templates to select special formatting styles for table cells - * reflecting the test status of the respective hardware. This functions returns the correct template name for - * the supplied enum test_state. */ -static const char *test_state_to_template(enum test_state test_state) -{ - switch (test_state) { - case OK: return "OK"; - case BAD: return "No"; - case NA: return "NA"; - case DEP: return "Dep"; - case NT: - default: return "?3"; - } -} - -#if CONFIG_INTERNAL == 1 -static const char laptop_intro[] = "\n== Supported mobile devices (laptops, tablets etc.) ==\n\n\ -In general, flashing mobile devices is more difficult because they\n\n\ -* often use the flash chip for stuff besides the BIOS,\n\ -* often have special protection stuff which has to be handled by flashrom,\n\ -* often use flash translation circuits which need drivers in flashrom.\n\n\ -<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \ -background-color:#ff6666; align:right; border:1px solid #000000;\">\n\ -'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \ -untested mobile devices unless you have a means to recover from a flashing that goes \ -wrong (a working backup flash chip and/or good soldering skills).\n</div>\n"; - -static void print_supported_chipsets_wiki(int cols) -{ - int i; - unsigned int lines_per_col; - const struct penable *e; - int enablescount = 0, color = 1; - - for (e = chipset_enables; e->vendor_name != NULL; e++) - enablescount++; - - /* +1 to force the resulting number of columns to be < cols */ - lines_per_col = enablescount / cols + ((enablescount%cols) > 0 ? 1 : 0); - - printf("\n== Supported chipsets ==\n\nTotal amount of supported chipsets: '''%d'''\n\n" - "{| border=\"0\" valign=\"top\"\n", enablescount); - - e = chipset_enables; - for (i = 0; e[i].vendor_name != NULL; i++) { - if ((i % lines_per_col) == 0) - printf("%s%s", th_start, chipset_th); - - /* Alternate colors if the vendor changes. */ - if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name)) - color = !color; - - printf("|- bgcolor=\"#%s\"\n| %s || %s " - "|| %04x:%04x || {{%s}}\n", (color) ? "eeeeee" : "dddddd", - e[i].vendor_name, e[i].device_name, - e[i].vendor_id, e[i].device_id, - test_state_to_template(e[i].status)); - - if (((i % lines_per_col) + 1) == lines_per_col) - printf("\n|}\n\n"); - } - - /* end inner table if it did not fill the last column fully */ - if (((i % lines_per_col)) > 0) - printf("\n|}\n\n"); - printf("\n\n|}\n"); -} - -static void print_supported_boards_wiki_helper(const char *devicetype, int cols, const struct board_info boards[]) -{ - int i, k; - unsigned int boardcount, lines_per_col; - unsigned int boardcount_good = 0, boardcount_bad = 0, boardcount_nt = 0; - int num_notes = 0, color = 1; - char *notes = calloc(1, 1); - char tmp[900 + 1]; - const struct board_match *b = board_matches; - - for (i = 0; boards[i].vendor != NULL; i++) { - if (boards[i].working == OK) - boardcount_good++; - else if (boards[i].working == NT) - boardcount_nt++; - else - boardcount_bad++; - } - boardcount = boardcount_good + boardcount_nt + boardcount_bad; - - /* +1 to force the resulting number of columns to be < cols */ - lines_per_col = boardcount / cols + ((boardcount%cols) > 0 ? 1 : 0); - - printf("\n\nTotal amount of known good %s: '''%d'''; " - "Untested (e.g. user vanished before testing new code): '''%d'''; " - "Not yet supported (i.e. known-bad): '''%d'''.\n\n" - "{| border=\"0\" valign=\"top\"\n", devicetype, boardcount_good, boardcount_nt, boardcount_bad); - - for (i = 0; boards[i].vendor != NULL; i++) { - if ((i % lines_per_col) == 0) - printf("%s%s", th_start, board_th); - - /* Alternate colors if the vendor changes. */ - if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor)) - color = !color; - - k = 0; - while ((b[k].vendor_name != NULL) && - (strcmp(b[k].vendor_name, boards[i].vendor) || - strcmp(b[k].board_name, boards[i].name))) { - k++; - } - - printf("|- bgcolor=\"#%s\"\n| %s || %s%s %s%s || %s%s%s%s " - "|| {{%s}}", (color) ? "eeeeee" : "dddddd", - boards[i].vendor, - boards[i].url ? "[" : "", - boards[i].url ? boards[i].url : "", - boards[i].name, - boards[i].url ? "]" : "", - b[k].lb_vendor ? "-p internal:mainboard=" : "—", - b[k].lb_vendor ? b[k].lb_vendor : "", - b[k].lb_vendor ? ":" : "", - b[k].lb_vendor ? b[k].lb_part : "", - test_state_to_template(boards[i].working)); - - if (boards[i].note) { - num_notes++; - printf(" <span id=\"%s_ref%d\"><sup>[[#%s_note%d|%d]]</sup></span>\n", - devicetype, num_notes, devicetype, num_notes, num_notes); - int ret = snprintf(tmp, sizeof(tmp), - "<span id=\"%s_note%d\">%d. [[#%s_ref%d|↑]]</span>" - " <nowiki>%s</nowiki><br />\n", devicetype, num_notes, num_notes, - devicetype, num_notes, boards[i].note); - if (ret < 0 || (unsigned int)ret >= sizeof(tmp)) { - fprintf(stderr, "Footnote text #%d of %s truncated (ret=%d, sizeof(tmp)=%zu)\n", - num_notes, devicetype, ret, sizeof(tmp)); - } - notes = strcat_realloc(notes, tmp); - } else { - printf("\n"); - } - - if (((i % lines_per_col) + 1) == lines_per_col) - printf("\n|}\n\n"); - } - - /* end inner table if it did not fill the last column fully */ - if (((i % lines_per_col)) > 0) - printf("\n|}\n\n"); - printf("|}\n"); - - if (num_notes > 0) - printf("\n<small>\n%s</small>\n", notes); - free(notes); -} - -static void print_supported_boards_wiki(void) -{ - printf("%s", board_intro); - print_supported_boards_wiki_helper("mainboards", 2, boards_known); - - printf("%s", laptop_intro); - print_supported_boards_wiki_helper("mobile devices", 1, laptops_known); -} -#endif - -static void print_supported_chips_wiki(int cols) -{ - unsigned int lines_per_col; - char *s; - char vmax[6]; - char vmin[6]; - const struct flashchip *f, *old = NULL; - int i = 0, c = 1, chipcount = 0; - - for (f = flashchips; f->name != NULL; f++) { - /* Don't count generic entries. */ - if (!strncmp(f->vendor, "Unknown", 7) || - !strncmp(f->vendor, "Programmer", 10) || - !strncmp(f->name, "unknown", 7)) - continue; - chipcount++; - } - - /* +1 to force the resulting number of columns to be < cols */ - lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0); - - printf("%s", chip_intro); - printf("\nTotal amount of supported chips: '''%d'''\n\n" - "{| border=\"0\" valign=\"top\"\n", chipcount); - - for (f = flashchips; f->name != NULL; f++) { - /* Don't print generic entries. */ - if (!strncmp(f->vendor, "Unknown", 7) || - !strncmp(f->vendor, "Programmer", 10) || - !strncmp(f->name, "unknown", 7)) - continue; - - if ((i % lines_per_col) == 0) - printf("%s%s", th_start, chip_th); - - /* Alternate colors if the vendor changes. */ - if (old != NULL && strcmp(old->vendor, f->vendor)) - c = !c; - - old = f; - s = flashbuses_to_text(f->bustype); - sprintf(vmin, "%0.03f", f->voltage.min / (double)1000); - sprintf(vmax, "%0.03f", f->voltage.max / (double)1000); - printf("|- bgcolor=\"#%s\"\n| %s || %s || align=\"right\" | %d " - "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}" - "|| %s || %s\n", - (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name, - f->total_size, s ? s : "?", - test_state_to_template(f->tested.probe), - test_state_to_template(f->tested.read), - test_state_to_template(f->tested.erase), - test_state_to_template(f->tested.write), - f->voltage.min ? vmin : "?", - f->voltage.max ? vmax : "?"); - free(s); - - if (((i % lines_per_col) + 1) == lines_per_col) - printf("\n|}\n\n"); - i++; - } - /* end inner table if it did not fill the last column fully */ - if (((i % lines_per_col)) > 0) - printf("\n|}\n\n"); - printf("|}\n\n"); -} - -/* Following functions are not needed when no PCI/USB programmers are compiled in, - * but since print_wiki code has no size constraints we include it unconditionally. */ -static int count_supported_devs_wiki(const struct dev_entry *devs) -{ - unsigned int count = 0; - unsigned int i = 0; - for (i = 0; devs[i].vendor_id != 0; i++) - count++; - return count; -} - -static void print_supported_devs_wiki_helper(const struct programmer_entry *const prog) -{ - int i = 0; - static int c = 0; - const struct dev_entry *devs = prog->devs.dev; - const unsigned int count = count_supported_devs_wiki(devs); - - /* Alternate colors if the vendor changes. */ - c = !c; - - for (i = 0; devs[i].vendor_id != 0; i++) { - printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd"); - if (i == 0) - printf("| rowspan=\"%u\" | %s |", count, prog->name); - printf("| %s || %s || %04x:%04x || {{%s}}\n", devs[i].vendor_name, devs[i].device_name, - devs[i].vendor_id, devs[i].device_id, test_state_to_template(devs[i].status)); - } -} - -static void print_supported_devs_wiki() -{ - unsigned int pci_count = 0; - unsigned int usb_count = 0; - unsigned int i; - - for (i = 0; i < programmer_table_size; i++) { - const struct programmer_entry *const prog = programmer_table[i]; - switch (prog->type) { - case USB: - usb_count += count_supported_devs_wiki(prog->devs.dev); - break; - case PCI: - pci_count += count_supported_devs_wiki(prog->devs.dev); - break; - case OTHER: - default: - break; - } - } - - printf("\n== PCI Devices ==\n\n" - "Total amount of supported PCI devices flashrom can use as a programmer: '''%d'''\n\n" - "{%s%s", pci_count, th_start, programmer_th); - - for (i = 0; i < programmer_table_size; i++) { - const struct programmer_entry *const prog = programmer_table[i]; - if (prog->type == PCI) { - print_supported_devs_wiki_helper(prog); - } - } - printf("\n|}\n\n|}\n"); - - printf("\n== USB Devices ==\n\n" - "Total amount of supported USB devices flashrom can use as a programmer: '''%d'''\n\n" - "{%s%s", usb_count, th_start, programmer_th); - - for (i = 0; i < programmer_table_size; i++) { - const struct programmer_entry *const prog = programmer_table[i]; - if (prog->type == USB) { - print_supported_devs_wiki_helper(prog); - } - } - printf("\n|}\n\n|}\n"); - - printf("\n== Other programmers ==\n\n" - "{%s", th_start); - printf("! align=\"left\" | Programmer\n" - "! align=\"left\" | Note\n\n"); - - for (i = 0; i < programmer_table_size; i++) { - static int c = 0; - const struct programmer_entry *const prog = programmer_table[i]; - if (prog->type == OTHER && prog->devs.note != NULL) { - c = !c; - printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd"); - printf("| %s || %s", prog->name, prog->devs.note); - } - } - printf("\n|}\n\n|}\n"); -} - -void print_supported_wiki(void) -{ - time_t t = time(NULL); - char buf[sizeof("1986-02-28T12:37:42Z")]; - strftime(buf, sizeof(buf), "%Y-%m-%dT%H:%M:%SZ", gmtime(&t)); - - printf(wiki_header, buf, flashrom_version); - print_supported_chips_wiki(2); -#if CONFIG_INTERNAL == 1 - print_supported_chipsets_wiki(3); - print_supported_boards_wiki(); -#endif - print_supported_devs_wiki(); -} -- To view, visit https://review.coreboot.org/c/flashrom/+/83941?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I9990add27f7fdddc23ddd1f33306566ce7548417 Gerrit-Change-Number: 83941 Gerrit-PatchSet: 1 Gerrit-Owner: Anastasia Klimchuk <aklm(a)chromium.org>

1 0

[S] Change in flashrom[main]: ichspi: Add RaptorPoint PCH support
by Anastasia Klimchuk (Code Review) 16 Aug '24

16 Aug '24

Attention is currently required from: Maciej Pijanowski, Michał Kopeć. Anastasia Klimchuk has posted comments on this change by Maciej Pijanowski. ( https://review.coreboot.org/c/flashrom/+/83854?usp=email ) Change subject: ichspi: Add RaptorPoint PCH support ...................................................................... Patch Set 3: (1 comment) Patchset: PS3: Could you please add this to document `/release_notes/devel.rst` ? We just introduced this doc as a place to gather ongoing new features (to make it easier to create release notes). If you could add a new header "Chipset support" and then just one line "Raptor Point PCH" that would be enough. Thanks! -- To view, visit https://review.coreboot.org/c/flashrom/+/83854?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I13ac52d5400c0e2260e12d605077fc2182c379ef Gerrit-Change-Number: 83854 Gerrit-PatchSet: 3 Gerrit-Owner: Maciej Pijanowski <maciej.pijanowski(a)3mdeb.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Michał Kopeć <michal.kopec(a)3mdeb.com> Gerrit-Attention: Maciej Pijanowski <maciej.pijanowski(a)3mdeb.com> Gerrit-Attention: Michał Kopeć <michal.kopec(a)3mdeb.com> Gerrit-Comment-Date: Fri, 16 Aug 2024 09:25:12 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[M] Change in flashrom[main]: ch347_spi: Add spi clock frequency selection
by Anastasia Klimchuk (Code Review) 16 Aug '24

16 Aug '24

Attention is currently required from: Nicholas Chin, ZhiYuanNJ. Anastasia Klimchuk has posted comments on this change by ZhiYuanNJ. ( https://review.coreboot.org/c/flashrom/+/82776?usp=email ) Change subject: ch347_spi: Add spi clock frequency selection ...................................................................... Patch Set 10: (1 comment) File ch347_spi.c: https://review.coreboot.org/c/flashrom/+/82776/comment/e772d905_4fb239e4?us… : PS7, Line 365: 30MHz > Sorry for the late reply. […] I have a suggestion, but please tell me what you all think about it. This thread is about changing/ or not changing default value, but no one argues about the feature itself. Maybe you can have first patch which adds the feature but keeps the default as is? And then later, in a separate patch, you can change the default value (if you both agree this is a good idea to change it). Or maybe you will keep the default. My point is that we can go ahead with the feature, and then spend more time discussing just the question of what is the best default setting. What do you think? -- To view, visit https://review.coreboot.org/c/flashrom/+/82776?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: If2be48929db540a6598ac0b60b37e64597156db7 Gerrit-Change-Number: 82776 Gerrit-PatchSet: 10 Gerrit-Owner: ZhiYuanNJ Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Nicholas Chin <nic.c3.14(a)gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: ZhiYuanNJ Gerrit-Attention: Nicholas Chin <nic.c3.14(a)gmail.com> Gerrit-Comment-Date: Fri, 16 Aug 2024 09:18:18 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Anastasia Klimchuk <aklm(a)chromium.org> Comment-In-Reply-To: ZhiYuanNJ Comment-In-Reply-To: Nicholas Chin <nic.c3.14(a)gmail.com>

1 0

[S] Change in flashrom[main]: ichspi: Add RaptorPoint PCH support
by Anastasia Klimchuk (Code Review) 16 Aug '24

16 Aug '24

Attention is currently required from: Maciej Pijanowski, Michał Kopeć. Anastasia Klimchuk has posted comments on this change by Maciej Pijanowski. ( https://review.coreboot.org/c/flashrom/+/83854?usp=email ) Change subject: ichspi: Add RaptorPoint PCH support ...................................................................... Patch Set 3: (2 comments) Patchset: PS3: Thank you for adding support! I have one comment (below), but also, a general question: is there any documentation that is available? Also I see that original commit a year ago, so this mean you are using the chipset for a year? (I think it's good, if there were any bugs you would find them already and fix :) File util/ich_descriptors_tool/ich_descriptors_tool.c: https://review.coreboot.org/c/flashrom/+/83854/comment/925d26c9_710570df?us… : PS3, Line 142: "\t- \"600\" or \"alder\" for Intel's 600 series chipsets.\n" Could you please add raptor here? And then run the tool, select this new option, and add the result to testing info in commit message? Thank you! -- To view, visit https://review.coreboot.org/c/flashrom/+/83854?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I13ac52d5400c0e2260e12d605077fc2182c379ef Gerrit-Change-Number: 83854 Gerrit-PatchSet: 3 Gerrit-Owner: Maciej Pijanowski <maciej.pijanowski(a)3mdeb.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Michał Kopeć <michal.kopec(a)3mdeb.com> Gerrit-Attention: Maciej Pijanowski <maciej.pijanowski(a)3mdeb.com> Gerrit-Attention: Michał Kopeć <michal.kopec(a)3mdeb.com> Gerrit-Comment-Date: Fri, 16 Aug 2024 08:49:45 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[S] Change in flashrom[main]: chipset_enable.c: Use PCI_ACCESS_ECAM to access pci register
by Kane Chen (Code Review) 16 Aug '24

16 Aug '24

Attention is currently required from: Hsuan Ting Chen, Hsuan-ting Chen, Kane Chen, Peter Marheine, Subrata Banik. Kane Chen has posted comments on this change by Kane Chen. ( https://review.coreboot.org/c/flashrom/+/83896?usp=email ) Change subject: chipset_enable.c: Use PCI_ACCESS_ECAM to access pci register ...................................................................... Patch Set 5: (1 comment) File meson_options.txt: https://review.coreboot.org/c/flashrom/+/83896/comment/a7506b52_37fc115b?us… : PS3, Line 9: option('use_libpci_ecam', type : 'boolean', value : false) > Yeah, I feel pretty comfortable assuming any system using a 100-series PCH should support ECAM since […] Thanks for the feedback. i'm confused about adding "adding an item to the release notes for this change" Did you mean release note like doc/user_docs/misc_intel.rst? -- To view, visit https://review.coreboot.org/c/flashrom/+/83896?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I4549f87c8b01da0a1d3d8ce0b3b75c1f5fa2cbab Gerrit-Change-Number: 83896 Gerrit-PatchSet: 5 Gerrit-Owner: Kane Chen <kane.chen(a)intel.com> Gerrit-Reviewer: Hsuan Ting Chen <roccochen(a)chromium.org> Gerrit-Reviewer: Hsuan-ting Chen <roccochen(a)google.com> Gerrit-Reviewer: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Kane Chen <kane.chen(a)intel.corp-partner.google.com> Gerrit-Attention: Hsuan Ting Chen <roccochen(a)chromium.org> Gerrit-Attention: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Hsuan-ting Chen <roccochen(a)google.com> Gerrit-Attention: Kane Chen <kane.chen(a)intel.com> Gerrit-Attention: Peter Marheine <pmarheine(a)chromium.org> Gerrit-Comment-Date: Fri, 16 Aug 2024 06:57:25 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Kane Chen <kane.chen(a)intel.corp-partner.google.com> Comment-In-Reply-To: Peter Marheine <pmarheine(a)chromium.org>

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit