June 2020 - flashrom-gerrit - mail.coreboot.org

Change in ...flashrom[master]: freebsd_spi: Use malloc() instead of alloca()
by David Hendricks (Code Review) 10 Oct '21

10 Oct '21

David Hendricks has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30765 Change subject: freebsd_spi: Use malloc() instead of alloca() ...................................................................... freebsd_spi: Use malloc() instead of alloca() Change-Id: I03ff2bd1e20bea014333945771b560f17387ebd6 Signed-off-by: David Hendricks <david.hendricks(a)gmail.com> --- M freebsd_spi.c 1 file changed, 7 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/65/30765/1 diff --git a/freebsd_spi.c b/freebsd_spi.c index 215be20..7514912 100644 --- a/freebsd_spi.c +++ b/freebsd_spi.c @@ -145,7 +145,11 @@ /* FreeBSD uses a single buffer for rx and tx. Allocate a temporary one to avoid overwriting anything. */ size_t tmpcnt = readcnt + writecnt; - unsigned char *tmpbuf = alloca(tmpcnt); + unsigned char *tmpbuf = malloc(tmpcnt); + if (!tmpbuf) { + msg_perr("Out of memory!\n"); + return -1; + } bzero(tmpbuf, tmpcnt); memcpy(tmpbuf, txbuf, writecnt); @@ -164,12 +168,14 @@ if (ioctl(fd, SPIGENIOC_TRANSFER, &msg) == -1) { msg_cerr("%s: ioctl: %s\n", __func__, strerror(errno)); + free(tmpbuf); return -1; } if (rxbuf) memcpy(rxbuf, tmpbuf + writecnt, readcnt); + free(tmpbuf); return 0; } -- To view, visit https://review.coreboot.org/c/flashrom/+/30765 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I03ff2bd1e20bea014333945771b560f17387ebd6 Gerrit-Change-Number: 30765 Gerrit-PatchSet: 1 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-MessageType: newchange

1 1

Change in ...flashrom[master]: Add freebsd_spi programmer
by David Hendricks (Code Review) 10 Oct '21

10 Oct '21

David Hendricks has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30764 Change subject: Add freebsd_spi programmer ...................................................................... Add freebsd_spi programmer Based on linux_spi, using FreeBSD's spigen(4) interface. Change-Id: I4e1689416fbb309df94807f51635bc1f4b53e0c8 Signed-off-by: Greg V <greg(a)unrelenting.technology> --- M Makefile M flashrom.8.tmpl M flashrom.c A freebsd_spi.c M programmer.h 5 files changed, 246 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/64/30764/1 diff --git a/Makefile b/Makefile index 1ff578c..7e709dc 100644 --- a/Makefile +++ b/Makefile @@ -379,6 +379,14 @@ endif endif +ifneq ($(TARGET_OS), FreeBSD) +ifeq ($(CONFIG_FREEBSD_SPI), yes) +UNSUPPORTED_FEATURES += CONFIG_FREEBSD_SPI=yes +else +override CONFIG_FREEBSD_SPI = no +endif +endif + ############################################################################### # General architecture-specific settings. # Like above for the OS, below we verify user-supplied options depending on the target architecture. @@ -647,6 +655,9 @@ CONFIG_LINUX_MTD ?= yes CONFIG_LINUX_SPI ?= yes +# Enable FreeBSD spigen interface by default. We disable them on non-FreeBSD targets. +CONFIG_FREEBSD_SPI ?= yes + # Always enable ITE IT8212F PATA controllers for now. CONFIG_IT8212 ?= yes @@ -945,6 +956,11 @@ PROGRAMMER_OBJS += linux_spi.o endif +ifeq ($(CONFIG_FREEBSD_SPI), yes) +FEATURE_CFLAGS += -D'CONFIG_FREEBSD_SPI=1' +PROGRAMMER_OBJS += freebsd_spi.o +endif + ifeq ($(CONFIG_MSTARDDC_SPI), yes) # This is a totally ugly hack. FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'") diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index c557af7..092f070 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -319,6 +319,8 @@ .sp .BR "* linux_spi" " (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)" .sp +.BR "* freebsd_spi" " (for SPI flash ROMs accessible via /dev/spigenX.Y on FreeBSD)" +.sp .BR "* usbblaster_spi" " (for SPI flash ROMs attached to an Altera USB-Blaster compatible cable)" .sp .BR "* nicintel_eeprom" " (for SPI EEPROMs on Intel Gigabit network cards)" @@ -1065,6 +1067,25 @@ .sp Please note that the linux_spi driver only works on Linux. .SS +.BR "freebsd_spi " programmer +.IP +You have to specify the SPI controller to use with the +.sp +.B " flashrom \-p freebsd_spi:dev=/dev/spigenX.Y" +.sp +syntax where +.B /dev/spigenX.Y +is the FreeBSD device node for your SPI controller. +.sp +In case the device supports it, you can set the SPI clock frequency with the optional +.B spispeed +parameter. The frequency is parsed as kilohertz. +Example that sets the frequency to 8 MHz: +.sp +.B " flashrom \-p freebsd_spi:dev=/dev/spigenX.Y,spispeed=8000" +.sp +Please note that the freebsd_spi driver only works on FreeBSD. +.SS .BR "mstarddc_spi " programmer .IP The Display Data Channel (DDC) is an I2C bus present on VGA and DVI connectors, that allows exchanging diff --git a/flashrom.c b/flashrom.c index 59a7531..624bcfb 100644 --- a/flashrom.c +++ b/flashrom.c @@ -377,6 +377,18 @@ }, #endif +#if CONFIG_FREEBSD_SPI == 1 + { + .name = "freebsd_spi", + .type = OTHER, + .devs.note = "Device files /dev/spigen*.*\n", + .init = freebsd_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_USBBLASTER_SPI == 1 { .name = "usbblaster_spi", diff --git a/freebsd_spi.c b/freebsd_spi.c new file mode 100644 index 0000000..215be20 --- /dev/null +++ b/freebsd_spi.c @@ -0,0 +1,186 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * Copyright (C) 2018 Greg V <greg(a)unrelenting.technology> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if CONFIG_FREEBSD_SPI == 1 + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <fcntl.h> +#include <errno.h> +#include <ctype.h> +#include <unistd.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/ioccom.h> +#include <sys/spigenio.h> +#include "flash.h" +#include "chipdrivers.h" +#include "programmer.h" +#include "spi.h" + +/* Tested on: + * Xunlong Orange Pi PC (Allwinner H3) */ + +/* Same as in spi(8) */ +#define DEFAULT_BUFFER_SIZE 8192 + +static int fd = -1; + +static int freebsd_spi_shutdown(void *data); +static int freebsd_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *txbuf, + unsigned char *rxbuf); +static int freebsd_spi_read(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len); +static int freebsd_spi_write_256(struct flashctx *flash, const uint8_t *buf, + unsigned int start, unsigned int len); + +static const struct spi_master spi_master_freebsd = { + .type = SPI_CONTROLLER_FREEBSD, + .features = SPI_MASTER_4BA, + .max_data_read = MAX_DATA_UNSPECIFIED, /* TODO? */ + .max_data_write = MAX_DATA_UNSPECIFIED, /* TODO? */ + .command = freebsd_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = freebsd_spi_read, + .write_256 = freebsd_spi_write_256, + .write_aai = default_spi_write_aai, +}; + +int freebsd_spi_init(void) +{ + char *p, *endp, *dev; + uint32_t speed_hz = 0; + /* FIXME: make the following configurable by CLI options. */ + /* SPI mode 0 (beware this also includes: MSB first, CS active low and others */ + const uint8_t mode = 0; + + p = extract_programmer_param("spispeed"); + if (p && strlen(p)) { + speed_hz = (uint32_t)strtoul(p, &endp, 10) * 1000; + if (p == endp) { + msg_perr("%s: invalid clock: %s kHz\n", __func__, p); + free(p); + return 1; + } + } + free(p); + + dev = extract_programmer_param("dev"); + if (!dev || !strlen(dev)) { + msg_perr("No SPI device given. Use flashrom -p " + "freebsd_spi:dev=/dev/spigenX.Y\n"); + free(dev); + return 1; + } + + msg_pdbg("Using device %s\n", dev); + if ((fd = open(dev, O_RDWR)) == -1) { + msg_perr("%s: failed to open %s: %s\n", __func__, + dev, strerror(errno)); + free(dev); + return 1; + } + free(dev); + + if (register_shutdown(freebsd_spi_shutdown, NULL)) + return 1; + /* We rely on the shutdown function for cleanup from here on. */ + + if (speed_hz > 0) { + if (ioctl(fd, SPIGENIOC_SET_CLOCK_SPEED, &speed_hz) == -1) { + msg_perr("%s: failed to set speed to %d Hz: %s\n", + __func__, speed_hz, strerror(errno)); + return 1; + } + + msg_pdbg("Using %d kHz clock\n", speed_hz/1000); + } + + if (ioctl(fd, SPIGENIOC_SET_SPI_MODE, &mode) == -1) { + msg_perr("%s: failed to set SPI mode to 0x%02x: %s\n", + __func__, mode, strerror(errno)); + return 1; + } + + register_spi_master(&spi_master_freebsd); + return 0; +} + +static int freebsd_spi_shutdown(void *data) +{ + if (fd != -1) { + close(fd); + fd = -1; + } + return 0; +} + +static int freebsd_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *txbuf, + unsigned char *rxbuf) +{ + if (fd == -1) + return -1; + /* The implementation currently does not support requests that + don't start with sending a command. */ + if (writecnt == 0) + return SPI_INVALID_LENGTH; + + /* FreeBSD uses a single buffer for rx and tx. Allocate a temporary one to avoid overwriting anything. */ + size_t tmpcnt = readcnt + writecnt; + unsigned char *tmpbuf = alloca(tmpcnt); + + bzero(tmpbuf, tmpcnt); + memcpy(tmpbuf, txbuf, writecnt); + + /* Command/data separation is pretty useless, spi(8) only uses the command. */ + struct spigen_transfer msg = { + .st_command = { + .iov_base = (void*)tmpbuf, + .iov_len = tmpcnt, + }, + .st_data = { + .iov_base = NULL, + .iov_len = 0, + }, + }; + + if (ioctl(fd, SPIGENIOC_TRANSFER, &msg) == -1) { + msg_cerr("%s: ioctl: %s\n", __func__, strerror(errno)); + return -1; + } + + if (rxbuf) + memcpy(rxbuf, tmpbuf + writecnt, readcnt); + + return 0; +} + +static int freebsd_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +{ + return spi_read_chunked(flash, buf, start, len, DEFAULT_BUFFER_SIZE); +} + +static int freebsd_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len) +{ + return spi_write_chunked(flash, buf, start, len, DEFAULT_BUFFER_SIZE); +} + +#endif // CONFIG_FREEBSD_SPI == 1 diff --git a/programmer.h b/programmer.h index 311992a..30687ed 100644 --- a/programmer.h +++ b/programmer.h @@ -103,6 +103,9 @@ #if CONFIG_LINUX_SPI == 1 PROGRAMMER_LINUX_SPI, #endif +#if CONFIG_FREEBSD_SPI == 1 + PROGRAMMER_FREEBSD_SPI, +#endif #if CONFIG_USBBLASTER_SPI == 1 PROGRAMMER_USBBLASTER_SPI, #endif @@ -548,6 +551,11 @@ int linux_spi_init(void); #endif +/* freebsd_spi.c */ +#if CONFIG_FREEBSD_SPI == 1 +int freebsd_spi_init(void); +#endif + /* dediprog.c */ #if CONFIG_DEDIPROG == 1 int dediprog_init(void); @@ -623,6 +631,9 @@ #if CONFIG_LINUX_SPI == 1 SPI_CONTROLLER_LINUX, #endif +#if CONFIG_FREEBSD_SPI == 1 + SPI_CONTROLLER_FREEBSD, +#endif #if CONFIG_SERPROG == 1 SPI_CONTROLLER_SERPROG, #endif -- To view, visit https://review.coreboot.org/c/flashrom/+/30764 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I4e1689416fbb309df94807f51635bc1f4b53e0c8 Gerrit-Change-Number: 30764 Gerrit-PatchSet: 1 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-MessageType: newchange

1 2

Change in ...flashrom[master]: layout: Introduce layout_next()
by Nico Huber (Code Review) 01 Jul '21

01 Jul '21

Hello Angel Pons, Arthur Heymans, David Hendricks, Thomas Heijligen, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/33542 to review the following change. Change subject: layout: Introduce layout_next() ...................................................................... layout: Introduce layout_next() And use it to compare the layouts in flashrom_layout_read_from_ifd() in depth. Change-Id: I284958471c61344d29d92c95d88475065a9ca9aa Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M layout.c M layout.h M libflashrom.c 3 files changed, 20 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/42/33542/1 diff --git a/layout.c b/layout.c index e49189e..684615c 100644 --- a/layout.c +++ b/layout.c @@ -252,7 +252,7 @@ return lowest; } -const struct romentry *layout_next_included( +const struct romentry *layout_next( const struct flashrom_layout *const layout, const struct romentry *iterator) { const struct romentry *const end = layout->entries + layout->num_entries; @@ -262,14 +262,21 @@ else iterator = &layout->entries[0]; - for (; iterator < end; ++iterator) { - if (!iterator->included) - continue; + if (iterator < end) return iterator; - } return NULL; } +const struct romentry *layout_next_included( + const struct flashrom_layout *const layout, const struct romentry *iterator) +{ + while ((iterator = layout_next(layout, iterator))) { + if (iterator->included) + break; + } + return iterator; +} + /** * @addtogroup flashrom-layout * @{ diff --git a/layout.h b/layout.h index 53a20d6..f5444e2 100644 --- a/layout.h +++ b/layout.h @@ -66,5 +66,6 @@ int process_include_args(struct flashrom_layout *l, const struct layout_include_args *const args); const struct romentry *layout_next_included_region(const struct flashrom_layout *, chipoff_t); const struct romentry *layout_next_included(const struct flashrom_layout *, const struct romentry *); +const struct romentry *layout_next(const struct flashrom_layout *, const struct romentry *); #endif /* !__LAYOUT_H__ */ diff --git a/libflashrom.c b/libflashrom.c index af62002..6743d50 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -345,8 +345,13 @@ goto _finalize_ret; } - if (chip_layout->base.num_entries != dump_layout.base.num_entries || - memcmp(chip_layout->entries, dump_layout.entries, sizeof(dump_layout.entries))) { + const struct romentry *chip_entry = layout_next(&chip_layout->base, NULL); + const struct romentry *dump_entry = layout_next(&dump_layout.base, NULL); + while (chip_entry && dump_entry && !memcmp(chip_entry, dump_entry, sizeof(*chip_entry))) { + chip_entry = layout_next(&chip_layout->base, chip_entry); + dump_entry = layout_next(&dump_layout.base, dump_entry); + } + if (chip_entry || dump_entry) { msg_cerr("Descriptors don't match!\n"); ret = 5; goto _finalize_ret; -- To view, visit https://review.coreboot.org/c/flashrom/+/33542 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I284958471c61344d29d92c95d88475065a9ca9aa Gerrit-Change-Number: 33542 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

5 25

Change in ...flashrom[master]: layout: Drop `count` parameter of flashrom_layout_empty()
by Nico Huber (Code Review) 26 Jun '21

26 Jun '21

Hello Angel Pons, Arthur Heymans, David Hendricks, Thomas Heijligen, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/33544 to review the following change. Change subject: layout: Drop `count` parameter of flashrom_layout_empty() ...................................................................... layout: Drop `count` parameter of flashrom_layout_empty() Change-Id: I22c180c9971068b1ae101845ce88484c6842b852 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M flashrom.c M ich_descriptors.c M layout.c M libflashrom.h 4 files changed, 5 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/44/33544/1 diff --git a/flashrom.c b/flashrom.c index cb91cef..eeaa067 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1332,7 +1332,7 @@ return -1; /* Fill default layout covering the whole chip. */ - if (flashrom_layout_empty(&flash->default_layout, 1) || + if (flashrom_layout_empty(&flash->default_layout) || flashrom_layout_add_region(flash->default_layout, 0, flash->chip->total_size * 1024 - 1, "complete flash") || flashrom_layout_include_region(flash->default_layout, "complete flash")) diff --git a/ich_descriptors.c b/ich_descriptors.c index 8383801..1d35cca 100644 --- a/ich_descriptors.c +++ b/ich_descriptors.c @@ -1170,7 +1170,7 @@ if (read_ich_descriptors_from_dump(dump, len, &cs, &desc)) return 1; - if (flashrom_layout_empty(layout, ARRAY_SIZE(regions))) + if (flashrom_layout_empty(layout)) return 2; ssize_t i; diff --git a/layout.c b/layout.c index 3560a18..9d633bb 100644 --- a/layout.c +++ b/layout.c @@ -33,7 +33,7 @@ struct flashrom_layout *get_global_layout(void) { if (!global_layout) - flashrom_layout_empty(&global_layout, 0); + flashrom_layout_empty(&global_layout); return global_layout; } @@ -264,12 +264,11 @@ * @brief Create a new, empty layout. * * @param layout Pointer to returned layout reference. - * @param count Number of layout entries to allocate. * * @return 0 on success, * 1 if out of memory. */ -int flashrom_layout_empty(struct flashrom_layout **const layout, const unsigned int count) +int flashrom_layout_empty(struct flashrom_layout **layout) { *layout = malloc(sizeof(**layout)); if (!*layout) { diff --git a/libflashrom.h b/libflashrom.h index 90f3e2c..785217e 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -62,7 +62,7 @@ int flashrom_image_verify(struct flashrom_flashctx *, const void *buffer, size_t buffer_len); struct flashrom_layout; -int flashrom_layout_empty(struct flashrom_layout **layout, unsigned int count); +int flashrom_layout_empty(struct flashrom_layout **); int flashrom_layout_read_from_ifd(struct flashrom_layout **, struct flashrom_flashctx *, const void *dump, size_t len); int flashrom_layout_read_fmap_from_rom(struct flashrom_layout **, struct flashrom_flashctx *, off_t offset, size_t length); -- To view, visit https://review.coreboot.org/c/flashrom/+/33544 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I22c180c9971068b1ae101845ce88484c6842b852 Gerrit-Change-Number: 33544 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

5 10

Change in ...flashrom[master]: layout: Introduce flashrom_layout_empty()
by Nico Huber (Code Review) 26 Jun '21

26 Jun '21

Hello Angel Pons, Arthur Heymans, David Hendricks, Thomas Heijligen, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/33543 to review the following change. Change subject: layout: Introduce flashrom_layout_empty() ...................................................................... layout: Introduce flashrom_layout_empty() It initializes an empty layout. Currently the maximum number of entries has to be specified, which will vanisch once we use dynamic allocation. Change-Id: I2ae7246493ff592e631cce924777925c7825e398 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M flash.h M flashrom.c M ich_descriptors.c M ich_descriptors.h M layout.c M libflashrom.c M libflashrom.h 8 files changed, 54 insertions(+), 37 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/43/33543/1 diff --git a/cli_classic.c b/cli_classic.c index 2e07612..a98be47 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -673,8 +673,10 @@ out_shutdown: programmer_shutdown(); out: - for (i = 0; i < chipcount; i++) + for (i = 0; i < chipcount; i++) { + flashrom_layout_release(flashes[i].default_layout); free(flashes[i].chip); + } layout_cleanup(&include_args); free(filename); diff --git a/flash.h b/flash.h index 5bbfa0a..84de7a7 100644 --- a/flash.h +++ b/flash.h @@ -252,7 +252,7 @@ chipaddr virtual_registers; struct registered_master *mst; const struct flashrom_layout *layout; - struct single_layout fallback_layout; + struct flashrom_layout *default_layout; struct { bool force; bool force_boardmismatch; diff --git a/flashrom.c b/flashrom.c index e355731..3436a59 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1331,15 +1331,12 @@ if (!flash->chip) return -1; - /* Fill fallback layout covering the whole chip. */ - struct single_layout *const fallback = &flash->fallback_layout; - fallback->base.entries = &fallback->entry; - fallback->base.max_entries = 1; - fallback->base.num_entries = 0; - if (flashrom_layout_add_region(&fallback->base, + /* Fill default layout covering the whole chip. */ + if (flashrom_layout_empty(&flash->default_layout, 1) || + flashrom_layout_add_region(flash->default_layout, 0, flash->chip->total_size * 1024 - 1, "complete flash") || - flashrom_layout_include_region(&fallback->base, "complete flash")) - return -1; + flashrom_layout_include_region(flash->default_layout, "complete flash")) + return -1; tmp = flashbuses_to_text(flash->chip->bustype); msg_cinfo("%s %s flash chip \"%s\" (%d kB, %s) ", force ? "Assuming" : "Found", diff --git a/ich_descriptors.c b/ich_descriptors.c index b2c5d4c..8383801 100644 --- a/ich_descriptors.c +++ b/ich_descriptors.c @@ -1156,7 +1156,9 @@ * 1 if the descriptor couldn't be parsed, * 2 when out of memory. */ -int layout_from_ich_descriptors(struct ich_layout *const layout, const void *const dump, const size_t len) +int layout_from_ich_descriptors( + struct flashrom_layout **const layout, + const void *const dump, const size_t len) { static const char *const regions[] = { "fd", "bios", "me", "gbe", "pd", "reg5", "bios2", "reg7", "ec", "reg9", "ie", @@ -1168,10 +1170,8 @@ if (read_ich_descriptors_from_dump(dump, len, &cs, &desc)) return 1; - memset(layout, 0x00, sizeof(*layout)); - layout->base.entries = layout->entries; - layout->base.max_entries = ARRAY_SIZE(layout->entries); - layout->base.num_entries = 0; + if (flashrom_layout_empty(layout, ARRAY_SIZE(regions))) + return 2; ssize_t i; for (i = 0; i < min(ich_number_of_regions(cs, &desc.content), ARRAY_SIZE(regions)); ++i) { @@ -1179,8 +1179,11 @@ const chipoff_t limit = ICH_FREG_LIMIT(desc.region.FLREGs[i]); if (limit <= base) continue; - if (flashrom_layout_add_region(&layout->base, base, limit, regions[i])) + if (flashrom_layout_add_region(*layout, base, limit, regions[i])) { + flashrom_layout_release(*layout); + *layout = NULL; return 2; + } } return 0; } diff --git a/ich_descriptors.h b/ich_descriptors.h index 4225286..498af21 100644 --- a/ich_descriptors.h +++ b/ich_descriptors.h @@ -562,11 +562,6 @@ struct ich_desc_upper_map upper; }; -struct ich_layout { - struct flashrom_layout base; - struct romentry entries[MAX_NUM_FLREGS]; -}; - ssize_t ich_number_of_regions(enum ich_chipset cs, const struct ich_desc_content *content); ssize_t ich_number_of_masters(enum ich_chipset cs, const struct ich_desc_content *content); @@ -585,6 +580,6 @@ int read_ich_descriptors_via_fdo(enum ich_chipset cs, void *spibar, struct ich_descriptors *desc); int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors *desc, uint8_t idx); -int layout_from_ich_descriptors(struct ich_layout *, const void *dump, size_t len); +int layout_from_ich_descriptors(struct flashrom_layout **, const void *dump, size_t len); #endif /* __ICH_DESCRIPTORS_H__ */ diff --git a/layout.c b/layout.c index 0978a67..8198f17 100644 --- a/layout.c +++ b/layout.c @@ -37,7 +37,7 @@ if (flashctx->layout && flashctx->layout->num_entries) return flashctx->layout; else - return &flashctx->fallback_layout.base; + return flashctx->default_layout; } #ifndef __LIBPAYLOAD__ @@ -270,6 +270,29 @@ */ /** + * @brief Create a new, empty layout. + * + * @param layout Pointer to returned layout reference. + * @param count Number of layout entries to allocate. + * + * @return 0 on success, + * 1 if out of memory. + */ +int flashrom_layout_empty(struct flashrom_layout **const layout, const unsigned int count) +{ + *layout = malloc(sizeof(**layout) + count * sizeof(struct romentry)); + if (!*layout) { + msg_gerr("Error creating layout: %s\n", strerror(errno)); + return 1; + } + + (*layout)->entries = (void *)((char *)*layout + sizeof(**layout)); + (*layout)->max_entries = count; + (*layout)->num_entries = 0; + return 0; +} + +/** * @brief Add another region to an existing layout. * * @param layout The existing layout. diff --git a/libflashrom.c b/libflashrom.c index aa43e65..d891944 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -205,13 +205,14 @@ ret = 0; /* We found one chip, now check that there is no second match. */ if (probe_flash(&registered_masters[i], flash_idx + 1, &second_flashctx, 0) != -1) { + flashrom_layout_release(second_flashctx.default_layout); ret = 3; break; } } } if (ret) { - free(*flashctx); + flashrom_flash_release(*flashctx); *flashctx = NULL; } return ret; @@ -235,6 +236,7 @@ */ void flashrom_flash_release(struct flashrom_flashctx *const flashctx) { + flashrom_layout_release(flashctx->default_layout); free(flashctx); } @@ -310,16 +312,10 @@ #ifndef __FLASHROM_LITTLE_ENDIAN__ return 6; #else - struct ich_layout dump_layout; + struct flashrom_layout *dump_layout, *chip_layout; int ret = 1; void *const desc = malloc(0x1000); - struct ich_layout *const chip_layout = malloc(sizeof(*chip_layout)); - if (!desc || !chip_layout) { - msg_gerr("Out of memory!\n"); - goto _free_ret; - } - if (prepare_flash_access(flashctx, true, false, false, false)) goto _free_ret; @@ -332,7 +328,7 @@ } msg_cinfo("done.\n"); - if (layout_from_ich_descriptors(chip_layout, desc, 0x1000)) { + if (layout_from_ich_descriptors(&chip_layout, desc, 0x1000)) { msg_cerr("Couldn't parse the descriptor!\n"); ret = 3; goto _finalize_ret; @@ -345,11 +341,11 @@ goto _finalize_ret; } - const struct romentry *chip_entry = layout_next(&chip_layout->base, NULL); - const struct romentry *dump_entry = layout_next(&dump_layout.base, NULL); + const struct romentry *chip_entry = layout_next(chip_layout, NULL); + const struct romentry *dump_entry = layout_next(dump_layout, NULL); while (chip_entry && dump_entry && !memcmp(chip_entry, dump_entry, sizeof(*chip_entry))) { - chip_entry = layout_next(&chip_layout->base, chip_entry); - dump_entry = layout_next(&dump_layout.base, dump_entry); + chip_entry = layout_next(chip_layout, chip_entry); + dump_entry = layout_next(dump_layout, dump_entry); } if (chip_entry || dump_entry) { msg_cerr("Descriptors don't match!\n"); @@ -365,7 +361,7 @@ finalize_flash_access(flashctx); _free_ret: if (ret) - free(chip_layout); + flashrom_layout_release(chip_layout); free(desc); return ret; #endif diff --git a/libflashrom.h b/libflashrom.h index 2b84bd4..90f3e2c 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -62,6 +62,7 @@ int flashrom_image_verify(struct flashrom_flashctx *, const void *buffer, size_t buffer_len); struct flashrom_layout; +int flashrom_layout_empty(struct flashrom_layout **layout, unsigned int count); int flashrom_layout_read_from_ifd(struct flashrom_layout **, struct flashrom_flashctx *, const void *dump, size_t len); int flashrom_layout_read_fmap_from_rom(struct flashrom_layout **, struct flashrom_flashctx *, off_t offset, size_t length); -- To view, visit https://review.coreboot.org/c/flashrom/+/33543 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2ae7246493ff592e631cce924777925c7825e398 Gerrit-Change-Number: 33543 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

5 26

Change in ...flashrom[master]: [RFC] cli_classic: Add `--mode (read|write|verify|erase)` parameter
by Nico Huber (Code Review) 13 May '21

13 May '21

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30979 Change subject: [RFC] cli_classic: Add `--mode (read|write|verify|erase)` parameter ...................................................................... [RFC] cli_classic: Add `--mode (read|write|verify|erase)` parameter In case the user only wants to specify files for specific layout regions, we need a way to set the operation without specifying a file. Instead of making the <filename> argument optional, we can add a new syntax for this particular purpose. This way, we avoid complex command line parsing and can do more sanity checks and provide better error messages. TODO: Update manpage in case this gets accepted. Change-Id: Idfba11ec9991aac423b07f68f7dc45e7bebbb06b Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M cli_classic.c 1 file changed, 42 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/79/30979/1 diff --git a/cli_classic.c b/cli_classic.c index 324e145..d09a8d1 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -39,7 +39,8 @@ "-z|" #endif "-p <programmername>[:<parameters>] [-c <chipname>]\n" - "[-E|(-r|-w|-v) <file>] [(-l <layoutfile>|--ifd) [-i <imagename>]...] [-n] [-N] [-f]]\n" + "[(-r|-w|-v|-E) <file>|-m (r|w|v|e)] [(-l <layoutfile>|--ifd) [-i <region>]...]\n" + "[-n] [-N] [-f]]\n" "[-V[V[V]]] [-o <logfile>]\n\n", name); printf(" -h | --help print this help text\n" @@ -47,6 +48,8 @@ " -r | --read <file> read flash and save to <file>\n" " -w | --write <file> write <file> to flash\n" " -v | --verify <file> verify flash against <file>\n" + " -m | --mode <operation> for use with --include <region>:<file>,\n" + " specify the mode of operation (r|w|v|e)\n" " -E | --erase erase flash memory\n" " -V | --verbose more verbose output\n" " -c | --chip <chipname> probe only for specified flash chip\n" @@ -123,6 +126,7 @@ {"write", 1, NULL, 'w'}, {"erase", 0, NULL, 'E'}, {"verify", 1, NULL, 'v'}, + {"mode", 1, NULL, 'm'}, {"noverify", 0, NULL, 'n'}, {"noverify-all", 0, NULL, 'N'}, {"chip", 1, NULL, 'c'}, @@ -200,6 +204,25 @@ filename = strdup(optarg); verify_it = 1; break; + case 'm': + if (++operation_specified > 1) { + fprintf(stderr, "More than one operation specified. Aborting.\n"); + cli_classic_abort_usage(); + } + /* check that `optarg` is a prefix of a known operation */ + if (strncmp(optarg, "read", strlen(optarg)) == 0) { + read_it = 1; + } else if (strncmp(optarg, "write", strlen(optarg)) == 0) { + write_it = 1; + } else if (strncmp(optarg, "verify", strlen(optarg)) == 0) { + verify_it = 1; + } else if (strncmp(optarg, "erase", strlen(optarg)) == 0) { + erase_it = 1; + } else { + fprintf(stderr, "Unknown operation specified: '%s'\n", optarg); + cli_classic_abort_usage(); + } + break; case 'n': if (verify_it) { fprintf(stderr, "--verify and --noverify are mutually exclusive. Aborting.\n"); @@ -404,7 +427,7 @@ cli_classic_abort_usage(); } - if ((read_it | write_it | verify_it) && check_filename(filename, "image")) { + if (filename && check_filename(filename, "image")) { cli_classic_abort_usage(); } if (layoutfile && check_filename(layoutfile, "layout")) { @@ -654,6 +677,23 @@ flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it); flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_WHOLE_CHIP, !dont_verify_all); + if (!filename && (read_it | write_it | verify_it)) { + if (layout->num_entries == 0) { + msg_gerr("Error: The specified operation requires a file.\n"); + ret = 1; + goto out_shutdown; + } + for (i = 0; i < layout->num_entries; i++) { + if (!layout->entries[i].file) { + msg_gerr("Error: Region \"%s\" requires a file argument.\n", + layout->entries[i].name); + ret = 1; + } + if (ret) + goto out_shutdown; + } + } + /* FIXME: We should issue an unconditional chip reset here. This can be * done once we have a .reset function in struct flashchip. * Give the chip time to settle. -- To view, visit https://review.coreboot.org/c/flashrom/+/30979 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Idfba11ec9991aac423b07f68f7dc45e7bebbb06b Gerrit-Change-Number: 30979 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 18

Change in flashrom[master]: chipset_enable.c: Add CMP-H IDs
by Gaggery Tsai (Code Review) 26 Apr '21

26 Apr '21

Gaggery Tsai has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37677 ) Change subject: chipset_enable.c: Add CMP-H IDs ...................................................................... chipset_enable.c: Add CMP-H IDs This patch adds CMP-H support. They are HM470, WM490, QM480, W480, H470, Z490 and Q470. TEST=build flashrom and run on CML-S with CMP-H flashrom -p internal -w ./coreboot.rom reboot and check the code is flashed correctly Signed-off-by: Gaggery Tsai <gaggery.tsai(a)intel.com> Change-Id: Ic7f04fc5cbe3422cbd219c46586c32fc847c921f --- M chipset_enable.c 1 file changed, 7 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/77/37677/1 diff --git a/chipset_enable.c b/chipset_enable.c index b55852c..62a19af 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -2046,6 +2046,13 @@ {0x8086, 0xa30c, B_S, NT, "Intel", "QM370", enable_flash_pch300}, {0x8086, 0xa30d, B_S, NT, "Intel", "HM370", enable_flash_pch300}, {0x8086, 0xa30e, B_S, DEP, "Intel", "CM246", enable_flash_pch300}, + {0x8086, 0x068d, B_S, NT, "Intel", "HM470", enable_flash_pch300}, + {0x8086, 0x068e, B_S, NT, "Intel", "WM490", enable_flash_pch300}, + {0x8086, 0x068c, B_S, NT, "Intel", "QM480", enable_flash_pch300}, + {0x8086, 0x0697, B_S, NT, "Intel", "W480", enable_flash_pch300}, + {0x8086, 0x0684, B_S, NT, "Intel", "H470", enable_flash_pch300}, + {0x8086, 0x0685, B_S, NT, "Intel", "Z490", enable_flash_pch300}, + {0x8086, 0x0687, B_S, NT, "Intel", "Q470", enable_flash_pch300}, #endif {0}, }; -- To view, visit https://review.coreboot.org/c/flashrom/+/37677 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ic7f04fc5cbe3422cbd219c46586c32fc847c921f Gerrit-Change-Number: 37677 Gerrit-PatchSet: 1 Gerrit-Owner: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-MessageType: newchange

7 25

Change in flashrom[master]: ft2232_spi.c - Pack read cmd and nCS in one ftdi_write_data() call
by Simon Buhrow (Code Review) 23 Apr '21

23 Apr '21

Simon Buhrow has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40748 ) Change subject: ft2232_spi.c - Pack read cmd and nCS in one ftdi_write_data() call ...................................................................... ft2232_spi.c - Pack read cmd and nCS in one ftdi_write_data() call Every ftdi_write_data() call is quite time consuming as the ftdi-chip takes 2-3ms to respond. As the comment already says: Minimize USB transfers by packing as many commands as possible together. As I cannot see any reason to put read cmd and deassertion of nCS into seperated ftdi calls, I packed them together to save programming time. Signed-off-by: Simon Buhrow <simon.buhrow(a)posteo.de> Change-Id: I3f76da3dd0124a0deec7f937dbc4b7dc488c8004 --- M ft2232_spi.c 1 file changed, 38 insertions(+), 40 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/48/40748/1 diff --git a/ft2232_spi.c b/ft2232_spi.c index 9f4c7f0..b2f5e40 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -398,7 +398,10 @@ msg_perr("Unable to set latency timer (%s).\n", ftdi_get_error_string(ftdic)); } - if (ftdi_write_data_set_chunksize(ftdic, 270)) { + if (ftdi_write_data_set_chunksize(ftdic, 280)) { + /* 280 Byte = (9 Byte CMD + 1 Byte WREN) + (9 Byte CMD + 1 Byte op) + 4 Byte Addr + * + 256 Byte PageWrite-data + with op: PageProgram or Erase; CMD: FTDI-Chip commands*/ msg_perr("Unable to set chunk size (%s).\n", ftdi_get_error_string(ftdic)); } @@ -467,31 +470,26 @@ struct ftdi_context *ftdic = &ftdic_context; static unsigned char *buf = NULL; /* failed is special. We use bitwise ops, but it is essentially bool. */ - int i = 0, ret = 0, failed = 0; - size_t bufsize; - static size_t oldbufsize = 0; + static int i = 0; + int ret = 0, failed = 0; if (writecnt > 65536 || readcnt > 65536) return SPI_INVALID_LENGTH; - /* buf is not used for the response from the chip. */ - bufsize = max(writecnt + 9, 260 + 9); - /* Never shrink. realloc() calls are expensive. */ - if (!buf || bufsize > oldbufsize) { - buf = realloc(buf, bufsize); + if (!buf) { + /* set buf size to hardware buffer size of ftdi*/ + buf = realloc(buf, 4096); if (!buf) { msg_perr("Out of memory!\n"); /* TODO: What to do with buf? */ return SPI_GENERIC_ERROR; } - oldbufsize = bufsize; } /* * Minimize USB transfers by packing as many commands as possible - * together. If we're not expecting to read, we can assert CS#, write, - * and deassert CS# all in one shot. If reading, we do three separate - * operations. + * together. We can assert CS#, write, (read,) + * and deassert CS# all in one shot. */ msg_pspew("Assert CS#\n"); buf[i++] = SET_BITS_LOW; @@ -506,44 +504,44 @@ i += writecnt; } - /* - * Optionally terminate this batch of commands with a - * read command, then do the fetch of the results. - */ + /* A optionally read command */ if (readcnt) { buf[i++] = MPSSE_DO_READ; buf[i++] = (readcnt - 1) & 0xff; buf[i++] = ((readcnt - 1) >> 8) & 0xff; - ret = send_buf(ftdic, buf, i); - failed = ret; - /* We can't abort here, we still have to deassert CS#. */ - if (ret) - msg_perr("send_buf failed before read: %i\n", ret); - i = 0; - if (ret == 0) { - /* - * FIXME: This is unreliable. There's no guarantee that - * we read the response directly after sending the read - * command. We may be scheduled out etc. - */ - ret = get_buf(ftdic, readarr, readcnt); - failed |= ret; - /* We can't abort here either. */ - if (ret) - msg_perr("get_buf failed: %i\n", ret); - } } msg_pspew("De-assert CS#\n"); buf[i++] = SET_BITS_LOW; buf[i++] = cs_bits; buf[i++] = pindir; - ret = send_buf(ftdic, buf, i); - failed |= ret; - if (ret) - msg_perr("send_buf failed at end: %i\n", ret); - return failed ? -1 : 0; + if (writearr[0] == JEDEC_WREN) { + /* Return to get second op (Program or Erase) without resetting buf nor i*/ + return 0; + } else { + ret = send_buf(ftdic, buf, i); + failed |= ret; + if (ret) + msg_perr("send_buf failed: %i\n", ret); + i = 0; + + if (readcnt) { + if (ret == 0) { + /* + * FIXME: This is unreliable. There's no guarantee that + * we read the response directly after sending the read + * command. We may be scheduled out etc. + */ + ret = get_buf(ftdic, readarr, readcnt); + failed |= ret; + /* We can't abort here either. */ + if (ret) + msg_perr("get_buf failed: %i\n", ret); + } + } + return failed ? -1 : 0; + } } #endif -- To view, visit https://review.coreboot.org/c/flashrom/+/40748 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I3f76da3dd0124a0deec7f937dbc4b7dc488c8004 Gerrit-Change-Number: 40748 Gerrit-PatchSet: 1 Gerrit-Owner: Simon Buhrow Gerrit-MessageType: newchange

3 10

Change in flashrom[master]: raiden_debug: Upstream ChromiumOS servo debug board prog
by Edward O'Callaghan (Code Review) 29 Mar '21

29 Mar '21

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/38209 ) Change subject: raiden_debug: Upstream ChromiumOS servo debug board prog ...................................................................... raiden_debug: Upstream ChromiumOS servo debug board prog Initial check-in of the Raiden debugger programmer. Squash in, usb_device: needed for raiden_debug prog BUG=b:143389556 BRANCH=none TEST=builds Change-Id: Ifad273a708acea4de797a0808be58960635a8864 Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M Makefile M flashrom.c M meson.build M meson_options.txt M programmer.h A raiden_debug_spi.c A usb_device.c A usb_device.h 8 files changed, 977 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/09/38209/1 diff --git a/Makefile b/Makefile index 7242b09..e8ca7a8 100644 --- a/Makefile +++ b/Makefile @@ -226,6 +226,11 @@ else override CONFIG_RAYER_SPI = no endif +ifeq ($(CONFIG_RAIDEN), yes) +UNSUPPORTED_FEATURES += CONFIG_RAIDEN=yes +else +override CONFIG_RAIDEN = no +endif ifeq ($(CONFIG_NIC3COM), yes) UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else @@ -607,6 +612,9 @@ # RayeR SPIPGM hardware support CONFIG_RAYER_SPI ?= yes +# ChromiumOS servo DUT debug board hardware support +CONFIG_RAIDEN ?= yes + # PonyProg2000 SPI hardware support CONFIG_PONY_SPI ?= yes @@ -817,6 +825,11 @@ NEED_RAW_ACCESS += CONFIG_RAYER_SPI endif +ifeq ($(CONFIG_RAIDEN), yes) +FEATURE_CFLAGS += -D'CONFIG_RAIDEN=1' +PROGRAMMER_OBJS += raiden_debug_spi.o usb_device.o +endif + ifeq ($(CONFIG_PONY_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1' PROGRAMMER_OBJS += pony_spi.o diff --git a/flashrom.c b/flashrom.c index e540027..e541b68 100644 --- a/flashrom.c +++ b/flashrom.c @@ -133,6 +133,18 @@ }, #endif +#if CONFIG_RAIDEN == 1 + { + .name = "raiden_debug", + .type = USB, + .devs.note = "All programmer devices speaking the raiden protocol\n", + .init = raiden_debug_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_DRKAISER == 1 { .name = "drkaiser", diff --git a/meson.build b/meson.build index 375089c..88b14cf 100644 --- a/meson.build +++ b/meson.build @@ -42,6 +42,7 @@ config_dummy = get_option('config_dummy') config_ft2232_spi = get_option('config_ft2232_spi') config_gfxnvidia = get_option('config_gfxnvidia') +config_raiden = get_option('config_raiden') config_internal = get_option('config_internal') config_it8212 = get_option('config_it8212') config_linux_mtd = get_option('config_linux_mtd') @@ -104,6 +105,7 @@ config_atavia = false config_drkaiser = false config_gfxnvidia = false + config_raiden = false config_internal = false config_it8212 = false config_nic3com = false @@ -170,6 +172,11 @@ srcs += 'gfxnvidia.c' cargs += '-DCONFIG_GFXNVIDIA=1' endif +if config_raiden + srcs += 'raiden_debug_spi.c' + srcs += 'usb_device.c' + cargs += '-DCONFIG_RAIDEN=1' +endif if config_internal srcs += 'board_enable.c' srcs += 'cbtable.c' diff --git a/meson_options.txt b/meson_options.txt index b7633d0..4334814 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -13,6 +13,7 @@ option('config_dummy', type : 'boolean', value : true, description : 'dummy tracing') option('config_ft2232_spi', type : 'boolean', value : true, description : 'FT2232 SPI dongles') option('config_gfxnvidia', type : 'boolean', value : true, description : 'NVIDIA graphics cards') +option('config_raiden', type : 'boolean', value : true, description : 'ChromiumOS Servo DUT debug board') option('config_internal', type : 'boolean', value : true, description : 'internal/onboard') option('config_internal_dmi', type : 'boolean', value : true, description : 'Use internal DMI parser') option('config_it8212', type : 'boolean', value : true, description : 'ITE IT8212F PATA') diff --git a/programmer.h b/programmer.h index 3cf53b9..08500c6 100644 --- a/programmer.h +++ b/programmer.h @@ -43,6 +43,9 @@ #if CONFIG_GFXNVIDIA == 1 PROGRAMMER_GFXNVIDIA, #endif +#if CONFIG_RAIDEN == 1 + PROGRAMMER_RAIDEN, +#endif #if CONFIG_DRKAISER == 1 PROGRAMMER_DRKAISER, #endif @@ -401,6 +404,11 @@ extern const struct dev_entry gfx_nvidia[]; #endif +/* raiden_debug_spi.c */ +#if CONFIG_RAIDEN == 1 +int raiden_debug_spi_init(void); +#endif + /* drkaiser.c */ #if CONFIG_DRKAISER == 1 int drkaiser_init(void); diff --git a/raiden_debug_spi.c b/raiden_debug_spi.c new file mode 100644 index 0000000..9af0f7d --- /dev/null +++ b/raiden_debug_spi.c @@ -0,0 +1,369 @@ +/* + * This file is part of the flashrom project. + * + * Copyright 2014, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + */ + +/* + * This SPI flash programming interface is designed to talk to a Chromium OS + * device over a Raiden USB connection. The USB connection is routed to a + * microcontroller running an image compiled from: + * + * https://chromium.googlesource.com/chromiumos/platform/ec + * + * The protocol for the USB-SPI bridge is documented in the following file in + * that respository: + * + * chip/stm32/usb_spi.c + */ + +#include "programmer.h" +#include "spi.h" +#include "usb_device.h" + +#include <libusb.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#define GOOGLE_VID 0x18D1 +#define GOOGLE_RAIDEN_SPI_SUBCLASS 0x51 +#define GOOGLE_RAIDEN_SPI_PROTOCOL 0x01 + +enum raiden_debug_spi_request { + RAIDEN_DEBUG_SPI_REQ_ENABLE = 0x0000, + RAIDEN_DEBUG_SPI_REQ_DISABLE = 0x0001, + RAIDEN_DEBUG_SPI_REQ_ENABLE_AP = 0x0002, + RAIDEN_DEBUG_SPI_REQ_ENABLE_EC = 0x0003, +}; + +#define PACKET_HEADER_SIZE 2 +#define MAX_PACKET_SIZE 64 + +/* + * This timeout is so large because the Raiden SPI timeout is 800ms. + */ +#define TRANSFER_TIMEOUT_MS 1000 + +struct usb_device *device = NULL; +uint8_t in_endpoint = 0; +uint8_t out_endpoint = 0; + +static int send_command(struct flashctx *flash, + unsigned int write_count, + unsigned int read_count, + const unsigned char *write_buffer, + unsigned char *read_buffer) +{ + uint8_t buffer[MAX_PACKET_SIZE]; + int transferred; + + if (write_count > MAX_PACKET_SIZE - PACKET_HEADER_SIZE) { + msg_perr("Raiden: invalid write_count of %d\n", write_count); + return SPI_INVALID_LENGTH; + } + + if (read_count > MAX_PACKET_SIZE - PACKET_HEADER_SIZE) { + msg_perr("Raiden: invalid read_count of %d\n", read_count); + return SPI_INVALID_LENGTH; + } + + buffer[0] = write_count; + buffer[1] = read_count; + + memcpy(buffer + PACKET_HEADER_SIZE, write_buffer, write_count); + + CHECK(LIBUSB(libusb_bulk_transfer(device->handle, + out_endpoint, + buffer, + write_count + PACKET_HEADER_SIZE, + &transferred, + TRANSFER_TIMEOUT_MS)), + "Raiden: OUT transfer failed\n" + " write_count = %d\n" + " read_count = %d\n", + write_count, + read_count); + + if ((unsigned) transferred != write_count + PACKET_HEADER_SIZE) { + msg_perr("Raiden: Write failure (wrote %d, expected %d)\n", + transferred, write_count + PACKET_HEADER_SIZE); + return 0x10001; + } + + CHECK(LIBUSB(libusb_bulk_transfer(device->handle, + in_endpoint, + buffer, + read_count + PACKET_HEADER_SIZE, + &transferred, + TRANSFER_TIMEOUT_MS)), + "Raiden: IN transfer failed\n" + " write_count = %d\n" + " read_count = %d\n", + write_count, + read_count); + + if ((unsigned) transferred != read_count + PACKET_HEADER_SIZE) { + msg_perr("Raiden: Read failure (read %d, expected %d)\n", + transferred, read_count + PACKET_HEADER_SIZE); + return 0x10002; + } + + memcpy(read_buffer, buffer + PACKET_HEADER_SIZE, read_count); + + return buffer[0] | (buffer[1] << 8); +} + +/* + * Unfortunately there doesn't seem to be a way to specify the maximum number + * of bytes that your SPI device can read/write, these values are the maximum + * data chunk size that flashrom will package up with an additional five bytes + * of command for the flash device, resulting in a 62 byte packet, that we then + * add two bytes to in either direction, making our way up to the 64 byte + * maximum USB packet size for the device. + * + * The largest command that flashrom generates is the byte program command, so + * we use that command header maximum size here. + */ +#define MAX_DATA_SIZE (MAX_PACKET_SIZE - \ + PACKET_HEADER_SIZE - \ + JEDEC_BYTE_PROGRAM_OUTSIZE) + +static const struct spi_master spi_master_raiden_debug = { + .features = SPI_MASTER_4BA, + .max_data_read = MAX_DATA_SIZE, + .max_data_write = MAX_DATA_SIZE, + .command = send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, +}; + +static int match_endpoint(struct libusb_endpoint_descriptor const *descriptor, + enum libusb_endpoint_direction direction) +{ + return (((descriptor->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK) == + direction) && + ((descriptor->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK) == + LIBUSB_TRANSFER_TYPE_BULK)); +} + +static int find_endpoints(struct usb_device *dev, uint8_t *in_ep, uint8_t *out_ep) +{ + int i; + int in_count = 0; + int out_count = 0; + + for (i = 0; i < dev->interface_descriptor->bNumEndpoints; i++) { + struct libusb_endpoint_descriptor const *endpoint = + &dev->interface_descriptor->endpoint[i]; + + if (match_endpoint(endpoint, LIBUSB_ENDPOINT_IN)) { + in_count++; + *in_ep = endpoint->bEndpointAddress; + } else if (match_endpoint(endpoint, LIBUSB_ENDPOINT_OUT)) { + out_count++; + *out_ep = endpoint->bEndpointAddress; + } + } + + if (in_count != 1 || out_count != 1) { + msg_perr("Raiden: Failed to find one IN and one OUT endpoint\n" + " found %d IN and %d OUT endpoints\n", + in_count, + out_count); + return 1; + } + + msg_pdbg("Raiden: Found IN endpoint = 0x%02x\n", *in_ep); + msg_pdbg("Raiden: Found OUT endpoint = 0x%02x\n", *out_ep); + + return 0; +} + +static int shutdown(void * data) +{ + CHECK(LIBUSB(libusb_control_transfer( + device->handle, + LIBUSB_ENDPOINT_OUT | + LIBUSB_REQUEST_TYPE_VENDOR | + LIBUSB_RECIPIENT_INTERFACE, + RAIDEN_DEBUG_SPI_REQ_DISABLE, + 0, + device->interface_descriptor->bInterfaceNumber, + NULL, + 0, + TRANSFER_TIMEOUT_MS)), + "Raiden: Failed to disable SPI bridge\n"); + + usb_device_free(device); + + device = NULL; + libusb_exit(NULL); + + return 0; +} + +static int get_target() +{ + int request_enable = RAIDEN_DEBUG_SPI_REQ_ENABLE; + + char *target_str = extract_programmer_param("target"); + if (target_str) { + if (!strcasecmp(target_str, "ap")) + request_enable = RAIDEN_DEBUG_SPI_REQ_ENABLE_AP; + else if (!strcasecmp(target_str, "ec")) + request_enable = RAIDEN_DEBUG_SPI_REQ_ENABLE_EC; + else { + msg_perr("Invalid target: %s\n", target_str); + request_enable = -1; + } + } + free(target_str); + + return request_enable; +} + +static void free_dev_list(struct usb_device **dev_lst) +{ + struct usb_device *dev = *dev_lst; + /* free devices we don't care about */ + dev = dev->next; + while (dev) + dev = usb_device_free(dev); +} + +int raiden_debug_spi_init(void) +{ + struct usb_match match; + char *serial = extract_programmer_param("serial"); + struct usb_device *current; + int found = 0; + + int request_enable = get_target(); + if (request_enable < 0) + return 1; + + usb_match_init(&match); + + usb_match_value_default(&match.vid, GOOGLE_VID); + usb_match_value_default(&match.class, LIBUSB_CLASS_VENDOR_SPEC); + usb_match_value_default(&match.subclass, GOOGLE_RAIDEN_SPI_SUBCLASS); + usb_match_value_default(&match.protocol, GOOGLE_RAIDEN_SPI_PROTOCOL); + + CHECK(LIBUSB(libusb_init(NULL)), "Raiden: libusb_init failed\n"); + + CHECK(usb_device_find(&match, &current), + "Raiden: Failed to find devices\n"); + + while (current) { + device = current; + + if (find_endpoints(device, &in_endpoint, &out_endpoint)) { + msg_pdbg("Raiden: Failed to find valid endpoints on device"); + usb_device_show(" ", current); + goto loop_end; + } + + if (usb_device_claim(device)) { + msg_pdbg("Raiden: Failed to claim USB device"); + usb_device_show(" ", current); + goto loop_end; + } + + if (!serial) { + found = 1; + goto loop_end; + } else { + unsigned char dev_serial[32]; + struct libusb_device_descriptor descriptor; + int rc; + + memset(dev_serial, 0, sizeof(dev_serial)); + + if (libusb_get_device_descriptor(device->device, &descriptor)) { + msg_pdbg("USB: Failed to get device descriptor.\n"); + goto loop_end; + } + + rc = libusb_get_string_descriptor_ascii(device->handle, + descriptor.iSerialNumber, + dev_serial, + sizeof(dev_serial)); + if (rc < 0) { + LIBUSB(rc); + } else { + if (strcmp(serial, (char *)dev_serial)) { + msg_pdbg("Raiden: Serial number %s did not match device", serial); + usb_device_show(" ", current); + } else { + msg_pinfo("Raiden: Serial number %s matched device", serial); + usb_device_show(" ", current); + found = 1; + } + } + } + +loop_end: + if (found) + break; + else + current = usb_device_free(current); + } + + if (!device || !found) { + msg_perr("Raiden: No usable device found.\n"); + return 1; + } + + free_dev_list(&current); + + CHECK(LIBUSB(libusb_control_transfer( + device->handle, + LIBUSB_ENDPOINT_OUT | + LIBUSB_REQUEST_TYPE_VENDOR | + LIBUSB_RECIPIENT_INTERFACE, + request_enable, + 0, + device->interface_descriptor->bInterfaceNumber, + NULL, + 0, + TRANSFER_TIMEOUT_MS)), + "Raiden: Failed to enable SPI bridge\n"); + + register_spi_master(&spi_master_raiden_debug); + register_shutdown(shutdown, NULL); + + return 0; +} diff --git a/usb_device.c b/usb_device.c new file mode 100644 index 0000000..0909694 --- /dev/null +++ b/usb_device.c @@ -0,0 +1,366 @@ +/* + * This file is part of the flashrom project. + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + */ + +#include "programmer.h" +#include "spi.h" +#include "usb_device.h" + +#include <assert.h> +#include <libusb.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +/* + * Possibly extract a programmer parameter and use it to initialize the given + * match value structure. + */ +static void usb_match_value_init(struct usb_match_value *match, + char const *parameter) +{ + char *string = extract_programmer_param(parameter); + + match->name = parameter; + + if (string) { + match->set = 1; + match->value = strtol(string, NULL, 0); + } else { + match->set = 0; + } + + free(string); +} + +#define USB_MATCH_VALUE_INIT(NAME) \ + usb_match_value_init(&match->NAME, #NAME) + +void usb_match_init(struct usb_match *match) +{ + USB_MATCH_VALUE_INIT(vid); + USB_MATCH_VALUE_INIT(pid); + USB_MATCH_VALUE_INIT(bus); + USB_MATCH_VALUE_INIT(address); + USB_MATCH_VALUE_INIT(config); + USB_MATCH_VALUE_INIT(interface); + USB_MATCH_VALUE_INIT(altsetting); + USB_MATCH_VALUE_INIT(class); + USB_MATCH_VALUE_INIT(subclass); + USB_MATCH_VALUE_INIT(protocol); +} + +void usb_match_value_default(struct usb_match_value *value, + long int default_value) +{ + if (value->set) + return; + + value->set = 1; + value->value = default_value; +} + +/* + * Match the value against a possible user supplied parameter. + * + * Return: + * 0: The user supplied the given parameter and it did not match the value. + * 1: Either the user didn't supply the parameter, or they did and it + * matches the given value. + */ +static int check_match(struct usb_match_value const *match_value, int value) +{ + int reject = match_value->set && (match_value->value != value); + + if (reject) + msg_pdbg("USB: Rejecting device because %s = %d != %d\n", + match_value->name, + value, + match_value->value); + + return !reject; +} + +/* + * Allocate a copy of device and add it to the head of the devices list. + */ +static void add_device(struct usb_device *device, + struct usb_device **devices) +{ + struct usb_device *copy = malloc(sizeof(struct usb_device)); + + assert(copy != NULL); + + *copy = *device; + + copy->next = *devices; + *devices = copy; + + libusb_ref_device(copy->device); +} + +/* + * Look through the interfaces of the current device config for a match. Stop + * looking after the first valid match is found. + * + * Return: + * 0: No matching interface was found. + * 1: A complete match was found and added to the devices list. + */ +static int find_interface(struct usb_match const *match, + struct usb_device *current, + struct usb_device **devices) +{ + int i, j; + + for (i = 0; i < current->config_descriptor->bNumInterfaces; ++i) { + struct libusb_interface const *interface; + + interface = &current->config_descriptor->interface[i]; + + for (j = 0; j < interface->num_altsetting; ++j) { + struct libusb_interface_descriptor const *descriptor; + + descriptor = &interface->altsetting[j]; + + if (check_match(&match->interface, + descriptor->bInterfaceNumber) && + check_match(&match->altsetting, + descriptor->bAlternateSetting) && + check_match(&match->class, + descriptor->bInterfaceClass) && + check_match(&match->subclass, + descriptor->bInterfaceSubClass) && + check_match(&match->protocol, + descriptor->bInterfaceProtocol)) { + current->interface_descriptor = descriptor; + add_device(current, devices); + msg_pdbg("USB: Found matching device\n"); + return 1; + } + } + } + + return 0; +} + +/* + * Look through the configs of the current device for a match. Stop looking + * after the first valid match is found. + * + * Return: + * 0: All configurations successfully checked, one may have been added to + * the list. + * non-zero: There was a failure while checking for a match. + */ +static int find_config(struct usb_match const *match, + struct usb_device *current, + struct libusb_device_descriptor const *device_descriptor, + struct usb_device **devices) +{ + int i; + + for (i = 0; i < device_descriptor->bNumConfigurations; ++i) { + CHECK(LIBUSB(libusb_get_config_descriptor( + current->device, + i, + &current->config_descriptor)), + "USB: Failed to get config descriptor"); + + if (check_match(&match->config, + current->config_descriptor-> + bConfigurationValue) && + find_interface(match, current, devices)) + break; + + libusb_free_config_descriptor(current->config_descriptor); + } + + return 0; +} + +int usb_device_find(struct usb_match const *match, struct usb_device **devices) +{ + libusb_device **list; + size_t count; + size_t i; + + *devices = NULL; + + CHECK(LIBUSB(count = libusb_get_device_list(NULL, &list)), + "USB: Failed to get device list"); + + for (i = 0; i < count; ++i) { + struct libusb_device_descriptor descriptor; + struct usb_device current = { + .device = list[i], + .handle = NULL, + .next = NULL, + }; + + uint8_t bus = libusb_get_bus_number(list[i]); + uint8_t address = libusb_get_device_address(list[i]); + + msg_pdbg("USB: Inspecting device (Bus %d, Address %d)\n", + bus, + address); + + CHECK(LIBUSB(libusb_get_device_descriptor(list[i], + &descriptor)), + "USB: Failed to get device descriptor"); + + if (check_match(&match->vid, descriptor.idVendor) && + check_match(&match->pid, descriptor.idProduct) && + check_match(&match->bus, bus) && + check_match(&match->address, address)) + CHECK(find_config(match, + &current, + &descriptor, + devices), + "USB: Failed to find config"); + } + + libusb_free_device_list(list, 1); + + return (*devices == NULL); +} + +/* + * If the underlying libusb device is not open, open it. + * + * Return: + * 0: The device was already open or was successfully opened. + * non-zero: There was a failure while opening the device. + */ +static int usb_device_open(struct usb_device *device) +{ + if (device->handle == NULL) + CHECK(LIBUSB(libusb_open(device->device, &device->handle)), + "USB: Failed to open device\n"); + + return 0; +} + +int usb_device_show(char const *prefix, struct usb_device *device) +{ + struct libusb_device_descriptor descriptor; + unsigned char product[256]; + + CHECK(usb_device_open(device), "USB: Failed to open device\n"); + + CHECK(LIBUSB(libusb_get_device_descriptor(device->device, &descriptor)), + "USB: Failed to get device descriptor\n"); + + CHECK(LIBUSB(libusb_get_string_descriptor_ascii( + device->handle, + descriptor.iProduct, + product, + sizeof(product))), + "USB: Failed to get device product string\n"); + + product[255] = '\0'; + + msg_perr("%sbus=0x%02x,address=0x%02x | %s\n", + prefix, + libusb_get_bus_number(device->device), + libusb_get_device_address(device->device), + product); + + return 0; +} + +int usb_device_claim(struct usb_device *device) +{ + int current_config; + + CHECK(usb_device_open(device), "USB: Failed to open device\n"); + + CHECK(LIBUSB(libusb_get_configuration(device->handle, + &current_config)), + "USB: Failed to get current device configuration\n"); + + if (current_config != device->config_descriptor->bConfigurationValue) + CHECK(LIBUSB(libusb_set_configuration( + device->handle, + device-> + config_descriptor-> + bConfigurationValue)), + "USB: Failed to set new configuration from %d to %d\n", + current_config, + device->config_descriptor->bConfigurationValue); + + CHECK(LIBUSB(libusb_set_auto_detach_kernel_driver(device->handle, 1)), + "USB: Failed to enable auto kernel driver detach\n"); + + CHECK(LIBUSB(libusb_claim_interface(device->handle, + device-> + interface_descriptor-> + bInterfaceNumber)), + "USB: Could not claim device interface %d\n", + device->interface_descriptor->bInterfaceNumber); + + if (device->interface_descriptor->bAlternateSetting != 0) + CHECK(LIBUSB(libusb_set_interface_alt_setting( + device->handle, + device-> + interface_descriptor-> + bInterfaceNumber, + device-> + interface_descriptor-> + bAlternateSetting)), + "USB: Failed to set alternate setting %d\n", + device->interface_descriptor->bAlternateSetting); + + return 0; +} + +struct usb_device *usb_device_free(struct usb_device *device) +{ + struct usb_device *next = device->next; + + if (device->handle != NULL) + libusb_close(device->handle); + + /* + * This unref balances the ref added in the add_device function. + */ + libusb_unref_device(device->device); + libusb_free_config_descriptor(device->config_descriptor); + + free(device); + + return next; +} diff --git a/usb_device.h b/usb_device.h new file mode 100644 index 0000000..46d2458 --- /dev/null +++ b/usb_device.h @@ -0,0 +1,201 @@ +/* + * This file is part of the flashrom project. + * + * Copyright 2015, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following disclaimer + * in the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + */ + +/* + * USB device matching framework + * + * This can be used to match a USB device by a number of different parameters. + * The parameters can be passed on the command line and defaults can be set + * by the programmer. + */ + +#include <libusb.h> +#include <stdint.h> + +/* + * Check Macro + * + * The check macro simplifies common return error code checking logic. If the + * expression does not evaluate to zero then the string error is printed and + * the expressions result is imediately returned, else the result is available + * as the value of the CHECK expression statement. + */ + +#define CHECK(expression, string...) \ + ({ \ + int error__ = (expression); \ + \ + if (error__ != 0) { \ + msg_perr(string); \ + return error__; \ + } \ + \ + error__; \ + }) + +/* + * The LIBUSB macro converts a libusb failure code into an error code that + * flashrom recognizes. It also displays additional libusb specific + * information about the failure. + */ +#define LIBUSB(expression) \ + ({ \ + int libusb_error__ = (expression); \ + \ + if (libusb_error__ < 0) { \ + msg_perr("libusb error: %s:%d %s\n", \ + __FILE__, \ + __LINE__, \ + libusb_error_name(libusb_error__)); \ + libusb_error__ = 0x20000 | -libusb_error__; \ + } else { \ + libusb_error__ = 0; \ + } \ + \ + libusb_error__; \ + }) + +/* + * A USB match and associated value struct are used to encode the information + * about a device against which we wish to match. If the value of a + * usb_match_value has been set then a device must match that value. The name + * of the usb_match_value is used to fetch the programmer parameter from the + * flashrom command line and is the same as the name of the corresponding + * field in usb_match. + */ +struct usb_match_value { + char const *name; + int value; + int set; +}; + +struct usb_match { + struct usb_match_value bus; + struct usb_match_value address; + struct usb_match_value vid; + struct usb_match_value pid; + struct usb_match_value serial; + struct usb_match_value config; + struct usb_match_value interface; + struct usb_match_value altsetting; + struct usb_match_value class; + struct usb_match_value subclass; + struct usb_match_value protocol; +}; + +/* + * Initialize a usb_match structure so that each value's name matches the + * values name in the usb_match structure (so bus.name == "bus"...), and + * look for each value in the flashrom command line via + * extract_programmer_param. If the value is found convert it to an integer + * using strtol, accepting hex, decimal and octal encoding. + */ +void usb_match_init(struct usb_match *match); + +/* + * Add a default value to a usb_match_value. This must be done after calling + * usb_match_init. If usb_match_init already set the value of a usb_match_value + * we do nothing, otherwise set the value to default_value. This ensures that + * parameters passed on the command line override defaults. + */ +void usb_match_value_default(struct usb_match_value *match, + long int default_value); + +/* + * The usb_device structure is an entry in a linked list of devices that were + * matched by usb_device_find. + */ +struct usb_device { + struct libusb_device *device; + struct libusb_config_descriptor *config_descriptor; + struct libusb_interface_descriptor const *interface_descriptor; + + /* + * Initially NULL, the libusb_device_handle is only valid once the + * usb_device has been successfully passed to usb_device_show or + * usb_device_claim. + */ + struct libusb_device_handle *handle; + + /* + * Link to next device, or NULL + */ + struct usb_device *next; +}; + +/* + * Find and return a list of all compatible devices. Each device is added to + * the list with its first valid configuration and interface. If an alternate + * configuration (config, interface, altsetting...) is desired the specifics + * can be supplied as programmer parameters. + * + * Return: + * 0: At least one matching device was found. + * 1: No matching devices were found. + */ +int usb_device_find(struct usb_match const *match, struct usb_device **devices); + +/* + * Display the devices bus and address as well as its product string. The + * underlying libusb device is opened if it is not already open. + * + * Return: + * 0: The device information was displayed. + * non-zero: There was a failure while displaying the device information. + */ +int usb_device_show(char const *prefix, struct usb_device *device); + +/* + * Open the underlying libusb device, set its config, claim the interface and + * select the correct alternate interface. + * + * Return: + * 0: The device was successfully claimed. + * non-zero: There was a failure while trying to claim the device. + */ +int usb_device_claim(struct usb_device *device); + +/* + * Free a usb_device structure. + * + * This ensures that the libusb device is closed and that all allocated + * handles and descriptors are freed. + * + * Return: + * The next device in the device list. + */ +struct usb_device *usb_device_free(struct usb_device *device); -- To view, visit https://review.coreboot.org/c/flashrom/+/38209 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ifad273a708acea4de797a0808be58960635a8864 Gerrit-Change-Number: 38209 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

7 29

Change in ...flashrom[master]: manibuilder: Add list of tags used for the 1.1.x branch
by Nico Huber (Code Review) 16 Mar '21

16 Mar '21

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33340 Change subject: manibuilder: Add list of tags used for the 1.1.x branch ...................................................................... manibuilder: Add list of tags used for the 1.1.x branch Change-Id: I243aa11f4a017a4209efcc227cec56eb12020e28 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/manibuilder/Makefile.targets 1 file changed, 48 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/40/33340/1 diff --git a/util/manibuilder/Makefile.targets b/util/manibuilder/Makefile.targets index 044b0a4..079c181 100644 --- a/util/manibuilder/Makefile.targets +++ b/util/manibuilder/Makefile.targets @@ -112,6 +112,46 @@ # can only run what is still maintained 10X_TAGS := $(filter $(10X_TAGS),$(ALL_TAGS)) +# original 1.1.x tags +11X_TAGS := \ + anita\:amd64 \ + djgpp\:6.1.0 \ + fedora\:25-x86_64 \ + fedora\:25-ppc64le \ + fedora\:25-aarch64 \ + fedora\:24-x86_64 \ + centos\:7.3-aarch64-clean \ + centos\:7.3-amd64-clean \ + centos\:7.2-amd64-clean \ + debian-debootstrap\:ppc64el-stretch \ + debian-debootstrap\:armhf-stretch \ + debian-debootstrap\:mips-stretch \ + debian-debootstrap\:mipsel-stretch \ + debian-debootstrap\:amd64-stretch \ + debian-debootstrap\:i386-stretch \ + debian-debootstrap\:amd64-sid \ + ubuntu-debootstrap\:arm64-xenial \ + ubuntu-debootstrap\:amd64-xenial \ + ubuntu-debootstrap\:powerpc-xenial \ + ubuntu-debootstrap\:amd64-bionic \ + alpine\:amd64-v3.7 \ + alpine\:amd64-v3.8 \ + alpine\:amd64-v3.6 \ + alpine\:armhf-v3.8 \ + alpine\:i386-v3.6 \ + alpine\:i386-v3.7 \ + alpine\:i386-v3.8 \ + debian-debootstrap\:amd64-buster \ + debian-debootstrap\:i386-buster \ + debian-debootstrap\:i386-sid \ + ubuntu-debootstrap\:armhf-xenial \ + ubuntu-debootstrap\:i386-bionic \ + ubuntu-debootstrap\:i386-xenial \ + ubuntu-debootstrap\:ppc64el-xenial \ + +# can only run what is still maintained +11X_TAGS := $(filter $(11X_TAGS),$(ALL_TAGS)) + default: $(DEFAULT_TAGS) native: $(NATIVE_TAGS) @@ -121,6 +161,9 @@ 1.0.x: export TEST_REVISION=refs/heads/1.0.x 1.0.x: $(10X_TAGS) +1.1.x: export TEST_REVISION=refs/heads/1.1.x +1.1.x: $(11X_TAGS) + show-default: @printf "%s\n" $(DEFAULT_TAGS) @@ -133,6 +176,9 @@ show-1.0.x: @printf "%s\n" $(10X_TAGS) -.PHONY: default native all 1.0.x -.PHONY: show-default show-native show-all show-1.0.x +show-1.1.x: + @printf "%s\n" $(11X_TAGS) + +.PHONY: default native all 1.0.x 1.1.x +.PHONY: show-default show-native show-all show-1.0.x show-1.1.x .PHONY: $(ALL_TAGS) -- To view, visit https://review.coreboot.org/c/flashrom/+/33340 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I243aa11f4a017a4209efcc227cec56eb12020e28 Gerrit-Change-Number: 33340 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 4

2024

2023

2022

2021

2020

2019

2018

2017

flashrom-gerrit June 2020