flashrom May 2013

flashrom@flashrom.org

30 participants
97 discussions

About flashing mx25l4005 on Itona TC2331
by Bin X 14 May '13

14 May '13

I apologize if it does not make sense at all since this is my first attempt to flash a bios with unmatched bios ID. I was trying to flash bios on a Itona TC2331 to get rid of the limitation they put on of any IDE HDD and USB HDD can’t be larger than 64mb. The current bios rom, flash program and documentation can be found here: ftp://ftpguest:letmein@ftp.vxl.net/../Utilities/BIOS/TC23YY/ Since I don’t have any working rom so I am hoping to use the file from this board http://b2b.gigabyte.com/products/product-page.aspx?pid=3215#dl Because they are from the same vendor and used the same chipset. I understand it may not work at all but decide to take the risk. However, I can’t find any program to flash the bios that can ignore the bios ID. The vendor provided one can flash the bios but does not have the option to ignore the unmatched bios ID. Flashrom failed at probing the chipset. The building Q-Flash tells that it is MX25L4005 which should be supported by Flashrom. I also tried “internal:laptop=this_is_not_a_laptop” and still no success. So I am not sure what else I should try to make Flashrom work. Any suggestions? Thanks,

2 1

Re: [flashrom] (no subject)
by Stefan Tauner 11 May '13

11 May '13

On Thu, 2 May 2013 12:57:16 -0700 David Hendricks <dhendrix(a)google.com> wrote: > What flash chip is this for? > > The id1 byte corresponds to ISSI, but there are not any ISSI SPI flash > chips supported at the moment. If you can provide the part number we can > add support. > I guess they avoid continuation bytes (again... I wonder what's so hard to grasp about them :/), it's probably this one: http://www.nantronicssemi.com/files/DS16MbSPIVer[1].A.PDF Koval can you confirm that it is a Nantronics N25S16? Where did you get it from? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

Re: [flashrom] [PATCH] dediprog: fix SPI clock setting.
by Nico Huber 08 May '13

08 May '13

Hello Stefan, Am 06.05.2013 19:30, schrieb Stefan Tauner: > Avoid setting SPI speed on firmware versions < 5.0.0 and note this > limitation in the man page. > Use the index stored for a given speed in the translation array instead > of the index of the element in that array. > > Signed-off-by: Patrick Georgi <patrick.georgi(a)secunet.com> > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > IMHO the speed setting was broken ever since. Has anyone every checked > the resulting frequency on the bus? Frequency wasn't checked but with speed settings below 8M the time to read a chip increased plausibly. > > I am not entirely sure why the translation table was introduced in the > first place although dediprog's indices could be "stored" in the array > offset, but mixing the two approaches is of course not a good idea. The translation table was used to make it obvious that the speeds are not ordered (see speed values for 12M and 8M). As the value range is continuous, we could use the array index as value. But please, comment on the interchanged speeds, when doing so. Well, I see one flaw in the current code: The default value for spispeed_idx in dediprog_init() (2 --> 8M) doesn't match the value mentioned in the manpage (12M). > > Nico, can you please verify that this patch is what you actually meant to do? Sorry, it is not. See below. Regards, Nico > > dediprog.c | 13 ++++++++----- > flashrom.8 | 3 ++- > 2 files changed, 10 insertions(+), 6 deletions(-) > > diff --git a/dediprog.c b/dediprog.c > index ab5388b..77ca195 100644 > --- a/dediprog.c > +++ b/dediprog.c > @@ -184,12 +184,15 @@ static const struct dediprog_spispeeds spispeeds[] = { > */ > static int dediprog_set_spi_speed(unsigned int spispeed_idx) The spispeed_idx parameter has to be an index into the spispeeds array. > { > - int ret; > + if (dediprog_firmwareversion < FIRMWARE_VERSION(5, 0, 0)) { > + msg_pwarn("Skipping to set SPI speed because firmware is too old.\n"); > + return 0; > + } > > msg_pdbg("SPI speed is %sHz\n", spispeeds[spispeed_idx].name); This is why I used an index into the array: To print the name of the selected speed. > > - ret = usb_control_msg(dediprog_handle, 0x42, 0x61, spispeeds[spispeed_idx].speed, 0xff, > - NULL, 0x0, DEFAULT_TIMEOUT); > + int ret = usb_control_msg(dediprog_handle, 0x42, 0x61, spispeeds[spispeed_idx].speed, 0xff, spispeed_idx is always used as an index into the spispeeds array. > + NULL, 0x0, DEFAULT_TIMEOUT); > if (ret != 0x0) { > msg_perr("Command Set SPI Speed 0x%x failed!\n", spispeeds[spispeed_idx].speed); Here also. > return 1; > @@ -801,12 +804,12 @@ int dediprog_init(void) > if (spispeed) { > for (i = 0; spispeeds[i].name; ++i) { > if (!strcasecmp(spispeeds[i].name, spispeed)) { > - spispeed_idx = i; > + spispeed_idx = spispeeds[i].speed; The value stored in this spispeed_idx variable is used to call dediprog_set_spi_speed() later. i is the index into the spispeeds array, so use that. > break; > } > } > if (!spispeeds[i].name) { > - msg_perr("Error: Invalid 'spispeed' value.\n"); > + msg_perr("Error: Invalid spispeed value: '%s'.\n", spispeed); > free(spispeed); > return 1; > } > diff --git a/flashrom.8 b/flashrom.8 > index c7a6c69..4e6ab55 100644 > --- a/flashrom.8 > +++ b/flashrom.8 > @@ -683,7 +683,8 @@ Usage example to select the second device: > .sp > An optional > .B spispeed > -parameter specifies the frequency of the SPI bus. Syntax is > +parameter specifies the frequency of the SPI bus. The firmware on the device needs to be 5.0.0 or newer. > +Syntax is > .sp > .B " flashrom \-p dediprog:spispeed=frequency" > .sp > -- M. Sc. Nico Huber Berater, SINA-Softwareentwicklung Public Sector secunet Security Networks AG Tel.: +49-201-5454-3635, Fax: +49-201-5454-1325 E-Mail: nico.huber(a)secunet.com Mergenthalerallee 77, 65760 Eschborn, Deutschland www.secunet.com ______________________________________________________________________ Sitz: Kronprinzenstraße 30, 45128 Essen, Deutschland Amtsgericht Essen HRB 13615 Vorstand: Dr. Rainer Baumgart (Vors.), Willem Bulthuis, Thomas Pleines Aufsichtsratsvorsitzender: Dr. Karsten Ottenberg ______________________________________________________________________

2 1

Re: [flashrom] [PATCH] Enable spi clock setting in dediprog driver
by Nico Huber 06 May '13

06 May '13

Rebased this one, following patches are based on it. This adds a programmer parameter 'spispeed' to the dediprog driver to control the transfer rate on the spi bus. The following rates are available (in Hz): 375k, 750k, 1.5M, 2.18M, 3M, 8M, 12M and 24M The original driver reinitializes the programmer after setting the speed, so the initialization calls have moved into a new function dediprog_setup() which is called twice. Signed-off-by: Nico Huber <nico.huber(a)secunet.com> diff --git a/dediprog.c b/dediprog.c index a81cf83..60067a8 100644 --- a/dediprog.c +++ b/dediprog.c @@ -152,7 +152,23 @@ static int dediprog_set_spi_voltage(int millivolt) return 0; } -#if 0 +struct dediprog_spispeeds { + const char *const name; + const int speed; +}; + +static const struct dediprog_spispeeds spispeeds[] = { + { "24M", 0x0 }, + { "12M", 0x2 }, + { "8M", 0x1 }, + { "3M", 0x3 }, + { "2.18M", 0x4 }, + { "1.5M", 0x5 }, + { "750k", 0x6 }, + { "375k", 0x7 }, + { NULL, 0x0 }, +}; + /* After dediprog_set_spi_speed, the original app always calls * dediprog_set_spi_voltage(0) and then * dediprog_check_devicestring() four times in a row. @@ -160,56 +176,20 @@ static int dediprog_set_spi_voltage(int millivolt) * This looks suspiciously like the microprocessor in the SF100 has to be * restarted/reinitialized in case the speed changes. */ -static int dediprog_set_spi_speed(uint16_t speed) +static int dediprog_set_spi_speed(unsigned int spispeed_idx) { int ret; - unsigned int khz; - /* Case 1 and 2 are in weird order. Probably an organically "grown" - * interface. - * Base frequency is 24000 kHz, divisors are (in order) - * 1, 3, 2, 8, 11, 16, 32, 64. - */ - switch (speed) { - case 0x0: - khz = 24000; - break; - case 0x1: - khz = 8000; - break; - case 0x2: - khz = 12000; - break; - case 0x3: - khz = 3000; - break; - case 0x4: - khz = 2180; - break; - case 0x5: - khz = 1500; - break; - case 0x6: - khz = 750; - break; - case 0x7: - khz = 375; - break; - default: - msg_perr("Unknown frequency selector 0x%x! Aborting.\n", speed); - return 1; - } - msg_pdbg("Setting SPI speed to %u kHz\n", khz); + msg_pdbg("SPI speed is %sHz\n", spispeeds[spispeed_idx].name); - ret = usb_control_msg(dediprog_handle, 0x42, 0x61, speed, 0xff, NULL, - 0x0, DEFAULT_TIMEOUT); + ret = usb_control_msg(dediprog_handle, 0x42, 0x61, spispeeds[spispeed_idx].speed, 0xff, + NULL, 0x0, DEFAULT_TIMEOUT); if (ret != 0x0) { - msg_perr("Command Set SPI Speed 0x%x failed!\n", speed); + msg_perr("Command Set SPI Speed 0x%x failed!\n", spispeeds[spispeed_idx].speed); return 1; } return 0; } -#endif /* Bulk read interface, will read multiple 512 byte chunks aligned to 512 bytes. * @start start address @@ -736,6 +716,28 @@ static int parse_voltage(char *voltage) return millivolt; } +static int dediprog_setup(void) +{ + /* URB 6. Command A. */ + if (dediprog_command_a()) { + return 1; + } + /* URB 7. Command A. */ + if (dediprog_command_a()) { + return 1; + } + /* URB 8. Command Prepare Receive Device String. */ + /* URB 9. Command Receive Device String. */ + if (dediprog_check_devicestring()) { + return 1; + } + /* URB 10. Command C. */ + if (dediprog_command_c()) { + return 1; + } + return 0; +} + static const struct spi_programmer spi_programmer_dediprog = { .type = SPI_CONTROLLER_DEDIPROG, .max_data_read = MAX_DATA_UNSPECIFIED, @@ -777,12 +779,21 @@ static int dediprog_shutdown(void *data) int dediprog_init(void) { struct usb_device *dev; - char *voltage; - int millivolt = 3500; - int ret; + char *voltage, *spispeed; + int spispeed_idx = 2, millivolt = 3500; + int i, ret; msg_pspew("%s\n", __func__); + spispeed = extract_programmer_param("spispeed"); + if (spispeed) { + for (i = 0; spispeeds[i].name; ++i) { + if (!strcasecmp(spispeeds[i].name, spispeed)) { + spispeed_idx = i; + break; + } + } + } voltage = extract_programmer_param("voltage"); if (voltage) { millivolt = parse_voltage(voltage); @@ -821,33 +832,26 @@ int dediprog_init(void) return 1; } dediprog_endpoint = 2; - + if (register_shutdown(dediprog_shutdown, NULL)) return 1; dediprog_set_leds(PASS_ON|BUSY_ON|ERROR_ON); - /* URB 6. Command A. */ - if (dediprog_command_a()) { + /* Perform basic setup. */ + if (dediprog_setup()) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); return 1; } - /* URB 7. Command A. */ - if (dediprog_command_a()) { - dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); - return 1; - } - /* URB 8. Command Prepare Receive Device String. */ - /* URB 9. Command Receive Device String. */ - if (dediprog_check_devicestring()) { - dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); - return 1; - } - /* URB 10. Command C. */ - if (dediprog_command_c()) { + + /* After setting voltage and speed, perform setup again. */ + if (dediprog_set_spi_voltage(0) || + dediprog_set_spi_speed(spispeed_idx) || + dediprog_setup()) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); return 1; } + /* URB 11. Command Set SPI Voltage. */ if (dediprog_set_spi_voltage(millivolt)) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); diff --git a/flashrom.8 b/flashrom.8 index b054c28..99e064e 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -651,6 +651,18 @@ where can be .BR 0V ", " 1.8V ", " 2.5V ", " 3.5V or the equivalent in mV. +.sp +An optional +.B spispeed +parameter specifies the frequency of the SPI bus. Syntax is +.sp +.B " flashrom \-p dediprog:spispeed=frequency" +.sp +where +.B frequency +can be +.BR 375k ", " 750k ", " 1.5M ", " 2.18M ", " 3M ", " 8M ", " 12M " or " 24M +(in Hz). The default is a frequency of 12 MHz. .SS .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use

3 4

W836xx
by fiebiee 05 May '13

05 May '13

sudo flashrom -V flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-486 (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (1 args): flashrom -V Calibrating delay loop... OS timer resolution is 1 usecs, 674M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 685M loops per second, delay more than 10% too short (got 87% of expected delay), recalculating... 610M loops per second, delay more than 10% too short (got 66% of expected delay), recalculating... 683M loops per second, delay more than 10% too short (got 74% of expected delay), recalculating... 679M loops per second, delay loop is unreliable, trying to continue 10 myus = 275 us, 100 myus = 74 us, 1000 myus = 850 us, 10000 myus = 9017 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Acer" DMI string system-product-name: "Extensa 3000 " DMI string system-version: "Rev 1 " DMI string baseboard-manufacturer: "Acer" DMI string baseboard-product-name: "Extensa 3000 " DMI string baseboard-version: "Rev 1.0 " DMI string chassis-type: "Notebook" Laptop detected via DMI. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: ec. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting.

1 0

Supporting of Intel HM65
by pavel 04 May '13

04 May '13

Hello! I am using Parted Magic Live CD operation system in my laptop. I want only *READ *information and use command in Konsole: "flashrom -r ASUS.def.iso -p internal:this_is_not_laptop >> error.txt" I have get this error file: *** error.txt **** flashrom v0.9.6.1-r1564 on Linux 3.7.9-pmagic (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel HM65". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... WARNING: BIOS region SMM protection is enabled! WARNING: SPI Configuration Lockdown activated. FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. OK. Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Reading flash... FAILED. *** *What is means???* I have read "Support chipset" in http://www.flashrom.org/Supported_hardware and saw *"?"* symbol for *Intel HM65*. Can I read flash in my laptop by your programm (flashrom v0.9.6.1-r1564)? _________________ Pavel Slipenchoock

2 1

Re: [flashrom] flashrom issues on our X86 blades.
by Stefan Tauner 04 May '13

04 May '13

On Wed, 24 Apr 2013 09:47:46 +0000 Andrew Zhao <Andrew.Zhao(a)radisys.com> wrote: > Hi flashrom experts: > > When I run "flashrom" on our X86 blades, there are some WARNING info , I am very appreciated if you can take a look > Into it and give some comments. http://flashrom.org/ME -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom on Thinkpad X301
by Joerg Albert 04 May '13

04 May '13

Hi, I ran flashrom on a Thinkpad X301 today with the result of the attached logfile. Just tried to get a dump of the BIOS, no writing intended. According to the schematics the BIOS chip is connected to the ICH9 only, so I guess reading the flash won't interfere with the EC. Any idea on how to work around the error? Regards, Jörg

2 1

Re: [flashrom] SN68SG2 shuttle xpc
by Stefan Tauner 04 May '13

04 May '13

On Tue, 30 Apr 2013 16:28:01 -0400 "Randolph C. Karrh" <rckarrh(a)gmail.com> wrote: > Greetings: > > I am planning to flashrom a *SN68*SG2 2007 shuttle PC. I know its not one > of your supported hardware systems, but it appears that if you can support > fn78 series this should be a no brainier too. > > Does anyone have any experience with the SN68 series? > > I have time, and I shall wait your reply. Did you read the text above the table too? http://flashrom.org/Supported_hardware#Supported_mainboards We just don't know and you have to try. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

(no subject)
by koval vovan 03 May '13

03 May '13

flashrom -p ft2232_spi:type=2232H -Vr bak.bin flashrom v0.9.6.1-r1672 on Linux 3.8.0-19-lowlatency (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.3, little endian Command line (4 args): flashrom -p ft2232_spi:type=2232H -Vr bak.bin Calibrating delay loop... OS timer resolution is 1 usecs, 2580M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 998 us, 10000 myus = 9983 us, 4 myus = 4 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H channel A. FTDI chip type 2 is not high-speed. Set clock divisor MPSSE clock: 12.000000 MHz, divisor: 2, SPI clock: 6.000000 MHz No loopback of TDI/DO TDO/DI Set data bits The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on ft2232_spi. Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xd5, id2 0x14 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI). === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Read is not working on this chip. Aborting.

3 2

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom May 2013