flashrom February 2011

flashrom@flashrom.org

37 participants
119 discussions

[PATCH] Add Asus P4P800-VM board to board_enable.c table.
by Diego Elio Pettenò 06 Mar '11

06 Mar '11

Only list the memory controller PCI IDs because the only other subsystem mentioned is used by network and sound interfaces both of which can be turned off in BIOS. Tested on a board rev 1.85. Signed-off-by: Diego Elio Pettenò <flameeyes(a)gmail.com> --- flashrom v0.9.3-runknown on Linux 2.6.35-std161-i386 (i686), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1327M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 869 us, 10000 myus = 7692 us, 4 myus = 9 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M. by More String" DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P4P800-VM" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH5/ICH5R", enabling flash write... chipset PCI ID is 8086:24d0, BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 OK. This chipset supports the following protocols: FWH. Disabling flash write protection for board "ASUS P4P800-VM"... Intel ICH LPC Bridge: Raising GPIO21. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for Spansion S25FL032A, 4096 KB: skipped. Probing for Spansion S25FL064A, 8192 KB: skipped. Probing for SST SST25VF010.REMS, 128 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xc8, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040FB, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. Restoring PCI config space for 00:1f:0 reg 0x4e --- board_enable.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index d09923a..c63669c 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1452,6 +1452,7 @@ static int intel_ich_gpio19_raise(void) * - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2 * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5 * - ASUS P4P800: Intel socket478 + 865PE + ICH5R + * - ASUS P4P800-VM: Intel socket478 + 865PE + ICH5R * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R * - ASUS P5GD1 Pro: Intel LGA 775 + 915P + ICH6R * - ASUS P5GDC Deluxe: Intel socket775 + 915P + ICH6R @@ -1917,6 +1918,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise}, + {0x8086, 0x2570, 0x1043, 0x80A5, 0, 0, 0, 0, NULL, NULL, NULL, "ASUS", "P4P800-VM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x1039, 0x0651, 0x1043, 0x8081, 0x1039, 0x0962, 0, 0, NULL, NULL, NULL, "ASUS", "P4SC-E", 0, OK, it8707f_write_enable_2e}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, -- 1.7.3.4

5 8

[patch] mark PMC Pm49FL004, SST SST49LF002, SST SST49LF004 and Winbond_W39V040FB as write tested
by Idwer Vollering 06 Mar '11

06 Mar '11

Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> Index: flashchips.c =================================================================== --- flashchips.c (revision 1261) +++ flashchips.c (working copy) @@ -4933,7 +4933,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -5804,7 +5804,7 @@ .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -5869,7 +5869,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -7939,7 +7939,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = --- flashrom v0.9.3-r1261 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... delay loop is unreliable, trying to continue OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: FWH. Disabling flash write protection for board "ASUS P4P800-VM"... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Erasing and writing flash chip... Done. Verifying flash... VERIFIED. flashrom v0.9.3-r1261 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... delay loop is unreliable, trying to continue OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: FWH. Disabling flash write protection for board "ASUS P4P800-VM"... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Erasing and writing flash chip... Done. Verifying flash... VERIFIED. flashrom v0.9.3-r1261 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: FWH. Disabling flash write protection for board "ASUS P4P800-VM"... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Erasing and writing flash chip... Done. Verifying flash... VERIFIED. flashrom v0.9.3-r1261 on Linux 2.6.37-ARCH (i686), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: FWH. Disabling flash write protection for board "ASUS P4P800-VM"... OK. Found chip "Winbond W39V040FB" (512 KB, FWH) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Erasing and writing flash chip... Done. Verifying flash... VERIFIED.

2 3

Success: Gigabyte GA-MA780G-UD3H
by Bernhard Geier 06 Mar '11

06 Mar '11

I was able to upgrade a Gigabyte GA-MA780G-UD3H with flashrom 0.9.2+r114 (from Debian Testing, AM64) to the newest BIOS. No additional options were required, everything worked as it should.

4 4

[PATCH] Add support for "ST M25PX16" chip.
by Carl Worth 06 Mar '11

06 Mar '11

This was created by simply copying the M25PX32 block and verifying with the M25PX16 datasheet which values needed to be changed. (The only changes are the model_id and the 4 size-related fields). Also, this commit sets the new M25PX16 as having write support tested, (where the M25PX32 does not). This is after running successful write and verify operations to 4 different M25PX16 chips with a Dediprog SF100. Signed-off-by: Carl Worth <carl.d.worth(a)intel.com> --- flashchips.c | 29 +++++++++++++++++++++++++++++ flashchips.h | 1 + 2 files changed, 30 insertions(+), 0 deletions(-) diff --git a/flashchips.c b/flashchips.c index e7a2223..0b84ae1 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6269,6 +6269,35 @@ struct flashchip flashchips[] = { { .vendor = "ST", + .name = "M25PX16", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX16, + .total_size = 2048, + .page_size = 256, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "ST", .name = "M25PX32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, diff --git a/flashchips.h b/flashchips.h index 6504edf..bbdb5ae 100644 --- a/flashchips.h +++ b/flashchips.h @@ -531,6 +531,7 @@ #define ST_M25P32 0x2016 #define ST_M25P64 0x2017 #define ST_M25P128 0x2018 +#define ST_M25PX16 0x7115 #define ST_M25PX32 0x7116 #define ST_M25PX64 0x7117 #define ST_M25PE10 0x8011 -- 1.7.2.3

3 2

[PATCH] Add mainboards to print.c and mark writing as tested on Winbond W25x80
by Yul Rottmann 05 Mar '11

05 Mar '11

Hello List, I successfully tested flashrom on my MSI MS-7596 (785GM-E51). Here is the patch to add it to the list of supported mainboards. Also I marked writing as tested on the flashchip that belongs to it. Earlier I reported the success of flashing my GIGABYTE GA-MA78G-DS3H. This patch makes clear that it is about the revision 1.0. I also tested flashing an ASRock 890GX Extreme3, which worked. I also added it to print.c. If you have questions, please contact me on my private e-mail adress since I haven't subscribed to the mailinglist. Thanks! Signed-off-by: Yul Rottmann <yulrottmann(a)bitel.net>

2 1

FAILED: Asus P5N-E SLI
by Segfault 04 Mar '11

04 Mar '11

Hi, I cannot flash the BIOS on my Asus P5N-E SLI. I am confident that I could reboot the computer without issues, as I have dumped before and after the error and the flash is unchanged. I still would like to have support for this motherboard. Here is the output of flashrom -V flashrom v0.9.3-r1262 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1866M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1006 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5N-E SLI" DMI string baseboard-version: "1.XX " DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8718. Found chipset "NVIDIA MCP51", enabling flash write... chipset PCI ID is 10de:0260, OK. This chipset supports the following protocols: Non-SPI. No IT87* serial flash segment enabled. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Bright BM29F040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Hyundai HY29F040A, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: probe_82802ab: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: probe_82802ab: id1 0x21, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: probe_82802ab: id1 0x21, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for Spansion S25FL032A, 4096 KB: skipped. Probing for Spansion S25FL064A, 8192 KB: skipped. Probing for SST SST25VF010.REMS, 128 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x21, id2 0x2d Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe9, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x21, id2 0xac, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x92, id2 0xb0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W29C020(C)/W29C022, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W29C040/P, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040C, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Found chip "Winbond W39V040C" (512 KB, LPC) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is active. Hardware remaining chip locking (#WP) is active.. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040FB, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Found chip "Winbond W39V040FC" (512 KB, FWH) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is active. Hardware remaining chip locking (#WP) is active.. Lock status of block at 0x00000000 is Full Access. Lock status of block at 0x00010000 is Full Access. Lock status of block at 0x00020000 is Full Access. Lock status of block at 0x00030000 is Full Access. Lock status of block at 0x00040000 is Full Access. Lock status of block at 0x00050000 is Full Access. Lock status of block at 0x00060000 is Full Access. Lock status of block at 0x00070000 is Full Access. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Multiple flash chips were detected: W39V040C W39V040FC Please specify which chip to use with the -c <chipname> option. Restoring PCI config space for 00:0a:0 reg 0x6d Here is the output when I specify either chip name: flashrom v0.9.3-r1262 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1866M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1005 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5N-E SLI" DMI string baseboard-version: "1.XX " DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8718. Found chipset "NVIDIA MCP51", enabling flash write... chipset PCI ID is 10de:0260, OK. This chipset supports the following protocols: Non-SPI. No IT87* serial flash segment enabled. Probing for Winbond W39V040C, 512 KB: probe_jedec_common: id1 0xda, id2 0x50 Found chip "Winbond W39V040C" (512 KB, LPC) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is active. Hardware remaining chip locking (#WP) is active.. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x00ffff:E Looking at blockwise erase function 1... trying... 0x000000-0x07ffff:E Looking at blockwise erase function 2... not defined. trying... Done. Verifying flash... Restoring PCI config space for 00:0a:0 reg 0x6d

2 3

[commit] r1263 - trunk
by repository service 28 Feb '11

28 Feb '11

Author: hailfinger Date: Tue Mar 1 00:58:15 2011 New Revision: 1263 URL: http://flashrom.org/trac/flashrom/changeset/1263 Log: Update the ITE IT8500 EC support to match the current state of the flashrom-chromium tree. This code has been deployed and tested to work on the Cr-48. There are a few caveats, though: - The boot BIOS straps register must be modified to select LPC. This can be done with the "select_bbs.sh" script (Install iotools at http://code.google.com/p/iotools/ before using select_bbs). - It is very important to disable power management daemons before running flashrom on this EC. I commented out the brute force method we use in the Chromium OS branch that disables powerd, since IIRC Carl-Daniel has a better approach in the works. - Due to dependencies which may be introduced by the OEM/ODM EC firmware, the code is not guaranteed to work for anything other than the Cr-48. Signed-off-by: David Hendricks <dhendrix(a)google.com> Carl-Daniel comments: Code is not hooked up yet because probing needs to be sorted out. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/Makefile trunk/it85spi.c trunk/programmer.h trunk/spi.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Tue Feb 22 18:16:34 2011 (r1262) +++ trunk/Makefile Tue Mar 1 00:58:15 2011 (r1263) @@ -184,7 +184,7 @@ FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o # FIXME: The PROGRAMMER_OBJS below should only be included on x86. -PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o mcp6x_spi.o +PROGRAMMER_OBJS += it87spi.o it85spi.o ichspi.o sb600spi.o wbsio_spi.o mcp6x_spi.o NEED_PCI := yes endif Modified: trunk/it85spi.c ============================================================================== --- trunk/it85spi.c Tue Feb 22 18:16:34 2011 (r1262) +++ trunk/it85spi.c Tue Mar 1 00:58:15 2011 (r1263) @@ -27,18 +27,23 @@ #if defined(__i386__) || defined(__x86_64__) #include <string.h> +#include <stdio.h> #include <stdlib.h> #include "flash.h" #include "chipdrivers.h" #include "spi.h" #include "programmer.h" +#define MAX_TIMEOUT 100000 +#define MAX_TRY 5 + /* Constans for I/O ports */ #define ITE_SUPERIO_PORT1 0x2e #define ITE_SUPERIO_PORT2 0x4e /* Legacy I/O */ -#define LEGACY_KBC_PORT 0x64 +#define LEGACY_KBC_PORT_DATA 0x60 +#define LEGACY_KBC_PORT_CMD 0x64 /* Constants for Logical Device registers */ #define LDNSEL 0x07 @@ -50,6 +55,13 @@ #define SHM_IO_BAD0 0x60 /* big-endian, this is high bits */ #define SHM_IO_BAD1 0x61 +/* 8042 keyboard controller uses an input buffer and an output buffer to + * communicate with host CPU. Both buffers are 1-byte depth. That means the + * IBF is set to 1 when host CPU sends a command to input buffer (standing on + * the EC side). IBF is cleared to 0 once the command is read by EC. */ +#define KB_IBF (1 << 1) /* Input Buffer Full */ +#define KB_OBF (1 << 0) /* Output Buffer Full */ + /* IT8502 supports two access modes: * LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode) * LPC_IO: through I/O port (so called indirect memory) @@ -95,11 +107,11 @@ ret.model = probe_id_ite85(ret.port); switch (ret.model >> 8) { case 0x85: - msg_pinfo("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x," - "Rev:0x%02x) on sio_port:0x%x.\n", - ret.model >> 8, ret.model & 0xff, - sio_read(ret.port, CHIP_CHIP_VER_REG), - ret.port); + msg_pdbg("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x," + "Rev:0x%02x) on sio_port:0x%x.\n", + ret.model >> 8, ret.model & 0xff, + sio_read(ret.port, CHIP_CHIP_VER_REG), + ret.port); return ret; } } @@ -111,20 +123,147 @@ return ret; } -/* IT8502 employs a scratch rom when flash is updating. Call the following two - * functions before/after flash erase/program. */ +/* This function will poll the keyboard status register until either + * an expected value shows up, or + * timeout reaches. + * + * Returns: 0 -- the expected value has shown. + * 1 -- timeout reached. + */ +static int wait_for( + const unsigned int mask, + const unsigned int expected_value, + const int timeout, /* in usec */ + const char* error_message, + const char* function_name, + const int lineno +) { + int time_passed; + + for (time_passed = 0;; ++time_passed) { + if ((INB(LEGACY_KBC_PORT_CMD) & mask) == expected_value) + return 0; + if (time_passed >= timeout) + break; + programmer_delay(1); + } + if (error_message) + msg_perr("%s():%d %s", function_name, lineno, error_message); + return 1; +} + +/* IT8502 employs a scratch ram when flash is being updated. Call the following + * two functions before/after flash erase/program. */ void it85xx_enter_scratch_rom() { + int ret; + int tries; + + msg_pdbg("%s():%d was called ...\n", __FUNCTION__, __LINE__); if (it85xx_scratch_rom_reenter > 0) return; - it85xx_scratch_rom_reenter++; - OUTB(0xb4, LEGACY_KBC_PORT); + +#if 0 + /* FIXME: this a workaround for the bug that SMBus signal would + * interfere the EC firmware update. Should be removed if + * we find out the root cause. */ + ret = system("stop powerd >&2"); + if (ret) { + msg_perr("Cannot stop powerd.\n"); + } +#endif + + for (tries = 0; tries < MAX_TRY; ++tries) { + /* Wait until IBF (input buffer) is not full. */ + if (wait_for(KB_IBF, 0, MAX_TIMEOUT, + "* timeout at waiting for IBF==0.\n", + __FUNCTION__, __LINE__)) + continue; + + /* Copy EC firmware to SRAM. */ + OUTB(0xb4, LEGACY_KBC_PORT_CMD); + + /* Confirm EC has taken away the command. */ + if (wait_for(KB_IBF, 0, MAX_TIMEOUT, + "* timeout at taking command.\n", + __FUNCTION__, __LINE__)) + continue; + + /* Waiting for OBF (output buffer) has data. + * Note sometimes the replied command might be stolen by kernel + * ISR so that it is okay as long as the command is 0xFA. */ + if (wait_for(KB_OBF, KB_OBF, MAX_TIMEOUT, NULL, NULL, 0)) + msg_pdbg("%s():%d * timeout at waiting for OBF.\n", + __FUNCTION__, __LINE__); + if ((ret = INB(LEGACY_KBC_PORT_DATA)) == 0xFA) { + break; + } else { + msg_perr("%s():%d * not run on SRAM ret=%d\n", + __FUNCTION__, __LINE__, ret); + continue; + } + } + + if (tries < MAX_TRY) { + /* EC already runs on SRAM */ + it85xx_scratch_rom_reenter++; + msg_pdbg("%s():%d * SUCCESS.\n", __FUNCTION__, __LINE__); + } else { + msg_perr("%s():%d * Max try reached.\n", + __FUNCTION__, __LINE__); + } } void it85xx_exit_scratch_rom() { +#if 0 + int ret; +#endif + int tries; + + msg_pdbg("%s():%d was called ...\n", __FUNCTION__, __LINE__); if (it85xx_scratch_rom_reenter <= 0) return; - it85xx_scratch_rom_reenter = 0; - OUTB(0xfe, LEGACY_KBC_PORT); + + for (tries = 0; tries < MAX_TRY; ++tries) { + /* Wait until IBF (input buffer) is not full. */ + if (wait_for(KB_IBF, 0, MAX_TIMEOUT, + "* timeout at waiting for IBF==0.\n", + __FUNCTION__, __LINE__)) + continue; + + /* Exit SRAM. Run on flash. */ + OUTB(0xFE, LEGACY_KBC_PORT_CMD); + + /* Confirm EC has taken away the command. */ + if (wait_for(KB_IBF, 0, MAX_TIMEOUT, + "* timeout at taking command.\n", + __FUNCTION__, __LINE__)) { + /* We cannot ensure if EC has exited update mode. + * If EC is in normal mode already, a further 0xFE + * command will reboot system. So, exit loop here. */ + tries = MAX_TRY; + break; + } + + break; + } + + if (tries < MAX_TRY) { + it85xx_scratch_rom_reenter = 0; + msg_pdbg("%s():%d * SUCCESS.\n", __FUNCTION__, __LINE__); + } else { + msg_perr("%s():%d * Max try reached.\n", + __FUNCTION__, __LINE__); + } + +#if 0 + /* FIXME: this a workaround for the bug that SMBus signal would + * interfere the EC firmware update. Should be removed if + * we find out the root cause. */ + ret = system("start powerd >&2"); + if (ret) { + msg_perr("Cannot start powerd again.\n"); + } +#endif } int it85xx_spi_common_init(void) @@ -256,6 +395,14 @@ readarr[i] = *ce_low; #endif } +#ifdef LPC_IO + INDIRECT_A1(shm_io_base, (((unsigned long int)ce_high) >> 8) & 0xff); + INDIRECT_WRITE(shm_io_base, 0xFF); /* Write anything to this address.*/ +#endif +#ifdef LPC_MEMORY + *ce_high = 0; +#endif + return 0; } Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Tue Feb 22 18:16:34 2011 (r1262) +++ trunk/programmer.h Tue Mar 1 00:58:15 2011 (r1263) @@ -523,6 +523,7 @@ #if defined(__i386__) || defined(__x86_64__) SPI_CONTROLLER_ICH7, SPI_CONTROLLER_ICH9, + SPI_CONTROLLER_IT85XX, SPI_CONTROLLER_IT87XX, SPI_CONTROLLER_SB600, SPI_CONTROLLER_VIA, @@ -583,6 +584,14 @@ int ich_spi_send_multicommand(struct spi_command *cmds); #endif +/* it85spi.c */ +struct superio probe_superio_ite85xx(void); +int it85xx_spi_init(void); +int it85xx_shutdown(void); +int it85xx_probe_spi_flash(const char *name); +int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr); + /* it87spi.c */ void enter_conf_mode_ite(uint16_t port); void exit_conf_mode_ite(uint16_t port); Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Tue Feb 22 18:16:34 2011 (r1262) +++ trunk/spi.c Tue Mar 1 00:58:15 2011 (r1263) @@ -55,6 +55,13 @@ .write_256 = ich_spi_write_256, }, + { /* SPI_CONTROLLER_IT85XX */ + .command = it85xx_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = ich_spi_read, + .write_256 = ich_spi_write_256, + }, + { /* SPI_CONTROLLER_IT87XX */ .command = it8716f_spi_send_command, .multicommand = default_spi_send_multicommand,

1 0

Hmmm
by Joseph Smith 28 Feb '11

28 Feb '11

http://www.schmalzhaus.com/UBW/ -- Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org

1 0

LPC programmer over serial port
by Joseph Smith 28 Feb '11

28 Feb '11

I found this interesting... LPC programmer over serial port... http://interesting-devices.com/asp/product.asp?recorprod=1&product=318&cat=… -- Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org

1 0

[patch] make EPoX EP-8NPA7I board enable actually work
by Jonathan A. Kollasch 27 Feb '11

27 Feb '11

The OEM BIOS on the EPoX EP-8PA7I clears byte 0x92 in the LPC bridge configuration space. Do the same for all CK804 chips, assuming this to be some sort of chipset-generic write-enable. Signed-off-by: Jonathan Kollasch <jakllsch(a)kollasch.net> ---

3 2

← Newer
1
...
5
6
7
8
9
10
11
12
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom February 2011