[PATCH] Add mainboards to print.c and mark writing as tested on Winbond W25x80

[Yul Rottmann]

Hello List, 
I successfully tested flashrom on my MSI MS-7596 (785GM-E51). Here is
the patch to add it to the list of supported mainboards. Also I marked
writing as tested on the flashchip that belongs to it.

Earlier I reported the success of flashing my GIGABYTE GA-MA78G-DS3H.
This patch makes clear that it is about the revision 1.0.

I also tested flashing an ASRock 890GX Extreme3, which worked. I also
added it to print.c.

If you have questions, please contact me on my private e-mail adress
since I haven't subscribed to the mailinglist. 
Thanks!

Signed-off-by: Yul Rottmann

[Carl-Daniel Hailfinger]

Hi Yul,

thanks for your patch!

Auf 28.02.2011 19:28, Yul Rottmann schrieb:
> I successfully tested flashrom on my MSI MS-7596 (785GM-E51). Here is
> the patch to add it to the list of supported mainboards. Also I marked
> writing as tested on the flashchip that belongs to it.
>
> Earlier I reported the success of flashing my GIGABYTE GA-MA78G-DS3H.
> This patch makes clear that it is about the revision 1.0.
>
> I also tested flashing an ASRock 890GX Extreme3, which worked. I also
> added it to print.c.
>
> If you have questions, please contact me on my private e-mail adress
> since I haven't subscribed to the mailinglist. 
> Thanks!
>
> Signed-off-by: Yul Rottmann

I'm sorry I didn't get around to applying your patch earlier.
Acked-by: Carl-Daniel Hailfinger 
and committed in r1264.

Regards,
Carl-Daniel