flashrom August 2010

flashrom@flashrom.org

77 participants
209 discussions

Re: [flashrom] New Intel Chipsets
by Michael Karcher 11 Aug '10

11 Aug '10

Am Freitag, den 06.08.2010, 08:52 +0200 schrieb Wagner, Helge (GE Intelligent Platforms): > >Ouch! Do you see a hang without that part of the patch? > Without the patch our boards are going into S5 some seconds after i > started flashrom. OK, this is probably the same issue that causes other boards to freeze. This patch has one minor issue: flash_enable_ich_dc_spi decodes the BIOS type select straps. They are valid for ICH7. ICH8, 9, 10 nearly have the same assignment, but accept 0 as alias for 1 (SPI) instead of declaring it as "reserved". But 5 Series/3400 OTOH has a completely different different assignment with IIRC SPI on 3, which we do not respect. I don't really want to push you into fixing that, but just raise awareness, nevertheless I would really appreciate a patch fixing that, too. I am really happy that there is a patch that makes the 5 Series chipsets usable in flashrom. So even with this quirk, the patch is in my oppinion a worthwile addition to flashrom and thus Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> The Intel PCI IDs can be verified for example using the Intel INF Update 9.1.2.1007. Regards, Michael Karcher

2 2

[commit] r1137 - trunk
by repository service 11 Aug '10

11 Aug '10

Author: mkarcher Date: Wed Aug 11 23:06:10 2010 New Revision: 1137 URL: http://flashrom.org/trac/coreboot/changeset/1137 Log: Add support for Intel 5 Series / 3400 Series chipsets (At least) for the QM57 which i have tested an additional patch was needed as some reserved bits in the "Software Sequencing Flash Control Register" (SSFC) needs to be programmed to 1 in the QM57. Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/chipset_enable.c trunk/ichspi.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sun Aug 8 23:56:52 2010 (r1136) +++ trunk/chipset_enable.c Wed Aug 11 23:06:10 2010 (r1137) @@ -1011,7 +1011,21 @@ {0x1166, 0x0205, OK, "Broadcom", "HT-1000", enable_flash_ht1000}, {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", enable_flash_ich10}, {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_ich10}, + {0x8086, 0x3b02, NT, "Intel", "P55", enable_flash_ich10}, + {0x8086, 0x3b03, NT, "Intel", "PM55", enable_flash_ich10}, + {0x8086, 0x3b06, NT, "Intel", "H55", enable_flash_ich10}, + {0x8086, 0x3b07, OK, "Intel", "QM57", enable_flash_ich10}, + {0x8086, 0x3b08, NT, "Intel", "H57", enable_flash_ich10}, + {0x8086, 0x3b09, NT, "Intel", "HM55", enable_flash_ich10}, + {0x8086, 0x3b0a, NT, "Intel", "Q57", enable_flash_ich10}, + {0x8086, 0x3b0b, NT, "Intel", "HM57", enable_flash_ich10}, {0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", enable_flash_ich10}, + {0x8086, 0x3b0e, NT, "Intel", "B55", enable_flash_ich10}, + {0x8086, 0x3b0f, NT, "Intel", "QS57", enable_flash_ich10}, + {0x8086, 0x3b12, NT, "Intel", "3400", enable_flash_ich10}, + {0x8086, 0x3b14, NT, "Intel", "3420", enable_flash_ich10}, + {0x8086, 0x3b16, NT, "Intel", "3450", enable_flash_ich10}, + {0x8086, 0x3b1e, NT, "Intel", "B55", enable_flash_ich10}, {0x8086, 0x7198, OK, "Intel", "440MX", enable_flash_piix4}, {0x8086, 0x25a1, OK, "Intel", "6300ESB", enable_flash_ich_4e}, {0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", enable_flash_ich_dc}, Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Sun Aug 8 23:56:52 2010 (r1136) +++ trunk/ichspi.c Wed Aug 11 23:06:10 2010 (r1137) @@ -560,7 +560,9 @@ } /* Assemble SSFS + SSFC */ - temp32 = 0; + /* keep reserved bits (23-19,7,0) */ + temp32 = REGREAD32(ICH9_REG_SSFS); + temp32 &= 0xF8008100; /* clear error status registers */ temp32 |= (SSFS_CDS + SSFS_FCERR);

1 0

[URGENT] Helpers for FrOSCamp expo needed!
by Carl-Daniel Hailfinger 11 Aug '10

11 Aug '10

We need helpers for the coreboot/flashrom booth at FrOSCamp! flashrom/coreboot will be exhibiting at the FrOSCamp conference/expo. http://froscamp.org/ - 17/18 September 2010 @ ETH Zurich, Switzerland Admission is free. FrOSCamp is an event similar to FOSDEM, and it will host the FUDCon EMEA and probably a few other developer meetings and hackfests as well. Please see http://wiki.froscamp.org/Welcome for info about the event. We will have a luxurious booth (big 180x85 cm table, 2-3 chairs, vast space, network connectivity and enough power). http://wiki.froscamp.org/2010:Call_for_Projects#coreboot.2Bflashrom The call for talks/hackfests/workshops is still open until 2010-08-14, so if you want to have your own talk/workshop/..., please register ASAP. Right now one talk about flashrom usage (in German) is scheduled, and I would also talk about coreboot (German/English), but having an empty booth during a talk is totally pointless. http://wiki.froscamp.org/2010:Call_for_Talks#flashrom_-_BIOS-.2FEFI-Updates…... What we need: - Someone who watches the booth and knows a few things about coreboot or flashrom (preferably both, but hey... you can always tell people to ask somebody else if you're not an expert for that project). - Someone who can help with booth setup and teardown. - Talks about a flashrom/coreboot related topic. - Workshops! - coreboot/flashrom flyers. Big bonus: The FrOSCamp organizers are friendly and try to help wherever possible. Regards, Carl-Daniel P.S. Right now I'm the only coreboot/flashrom person who plans to come to FrOSCamp, so even if you don't think you can answer every question, please come!

1 0

laptop board enable needed for HP NC4200
by Przemo Firszt 10 Aug '10

10 Aug '10

Hi, As per carldani instruction: Link to BIOS dump: http://filebin.ca/wagnaj/old_BIOS [przemo@pldmachine ~/flashrom]$ sudo /usr/local/sbin/flashrom -p internal:laptop=force_I_want_a_brick -V flashrom v0.9.2-r1136 on Linux 2.6.35-rc6-00127-g1a041a2 (i686), built with libpci 3.1.7, GCC 4.5.0 20100601 (release), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 3 usecs, 1120M loops per second, 10 myus = 10 us, 100 myus = 91 us, 1000 myus = 903 us, 10000 myus = 11668 us, 12 myus = 14 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Compaq nc4200 (PV983AW#ABU) " DMI string system-version: "F.0B" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "0938" DMI string baseboard-version: "KBC Version 38.59" DMI string chassis-type: "Notebook" Laptop detected via DMI ======================================================================== WARNING! You seem to be running flashrom on a laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user specified laptop=force_I_want_a_brick Found chipset "Intel ICH6-M", enabling flash write... chipset PCI ID is 8086:2641, 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: FWH. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5a Found chip "SST SST49LF008A" (1024 KB, FWH) at physical address 0xfff00000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Lock status for 0x080000 (size 0x010000) is 00, full access Lock status for 0x090000 (size 0x010000) is 00, full access Lock status for 0x0a0000 (size 0x010000) is 00, full access Lock status for 0x0b0000 (size 0x010000) is 00, full access Lock status for 0x0c0000 (size 0x010000) is 00, full access Lock status for 0x0d0000 (size 0x010000) is 00, full access Lock status for 0x0e0000 (size 0x010000) is 00, full access Lock status for 0x0f0000 (size 0x010000) is 00, full access Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x8f, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5a Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No operations were specified. [przemo@pldmachine ~/flashrom]$ sudo /usr/local/sbin/superiotool -deV superiotool r5689 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x8400, id=0x000f Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0x0f, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Found SMSC LPC47N217 (id=0x7a, rev=0x01) at 0x4e No dump available for this Super I/O No extra registers known for this chip. Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. [przemo@pldmachine ~/flashrom]$ /sbin/lspci -nnvvvxxx 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00: 86 80 90 25 06 00 90 20 03 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0a00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 2000 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at d0a80000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00: 86 80 92 25 07 00 90 00 03 00 00 03 00 00 80 00 10: 00 00 a0 d0 01 20 00 00 08 00 00 c0 00 00 a8 d0 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0b00000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00: 86 80 92 27 07 00 90 00 03 00 80 03 00 00 80 00 10: 00 00 b0 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0000000-d03fffff Prefetchable memory behind bridge: 0000000044000000-00000000441fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00: 86 80 60 26 07 00 10 00 03 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 10 10 00 30 30 00 00 20: 00 d0 30 d0 01 44 11 44 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 44200000-443fffff Prefetchable memory behind bridge: 0000000044400000-00000000445fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00: 86 80 62 26 07 00 10 00 03 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 20 20 00 40 40 00 00 20: 20 44 30 44 41 44 51 44 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 04 00 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at 2020 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 58 26 05 00 80 02 03 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 20 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 2040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 59 26 05 00 80 02 03 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 20 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 4: I/O ports at 2060 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 5a 26 05 00 80 02 03 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 20 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 0: Memory at d0b80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 86 80 5c 26 06 00 90 02 03 20 03 0c 00 00 00 00 10: 00 00 b8 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0400000-d09fffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00: 86 80 48 24 07 01 10 00 d3 01 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 06 20 50 50 80 22 20: 40 d0 90 d0 01 40 f1 43 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 2100 [size=256] Region 1: I/O ports at 2200 [size=64] Region 2: Memory at d0b81000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0b82000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00: 86 80 6e 26 07 00 90 02 03 00 01 04 00 00 00 00 10: 01 21 00 00 01 22 00 00 00 10 b8 d0 00 20 b8 d0 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng 00: 86 80 41 26 07 00 00 02 03 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 2240 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00: 86 80 6f 26 05 00 80 02 03 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 41 22 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:12f6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200 00: 86 80 20 42 06 00 90 02 05 00 80 02 10 40 00 00 10: 00 00 40 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f6 12 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 03 18 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031] Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 48000000-4bfff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00: 4c 10 31 80 07 00 10 02 00 00 07 06 10 a8 82 00 10: 00 10 40 d0 a0 00 00 02 02 03 06 b0 00 00 00 40 20: 00 f0 ff 43 00 00 00 48 00 f0 ff 4b 00 50 00 00 30: fc 50 00 00 00 54 00 00 fc 54 00 00 0a 01 c0 05 40: 3c 10 38 09 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033] Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 10 Region 0: Memory at d0402000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> 00: 4c 10 33 80 06 00 10 02 00 00 80 01 10 40 80 00 10: 00 20 40 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 07 04 02:06.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034] (prog-if 01) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 10 Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=256] Region 1: Memory at d0405000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at d0406000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 00: 4c 10 34 80 06 00 10 02 00 01 05 08 10 40 80 00 10: 00 40 40 d0 00 50 40 d0 00 60 40 d0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 07 04 02:06.5 Communication controller [0780]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller [104c:8035] Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 10 Region 0: Memory at d0407000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at d0408000 (32-bit, non-prefetchable) [size=4K] Region 2: Memory at d0409000 (32-bit, non-prefetchable) [size=4K] Region 3: Memory at d040a000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00: 4c 10 35 80 02 00 10 02 00 00 80 07 00 00 80 00 10: 00 70 40 d0 00 80 40 d0 00 90 40 d0 00 a0 40 d0 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 04 00 00 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 00: e4 14 7d 16 06 00 10 00 11 00 00 02 10 00 00 00 10: 04 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 00 00 00 3c 10 38 09 30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00 -- Przemo Firszt

1 0

laptop board enable needed for HP NC4200
by Przemo Firszt 10 Aug '10

10 Aug '10

Hi, As per carldani instruction: [przemo@pldmachine ~/flashrom]$ sudo /usr/local/sbin/flashrom -p internal:laptop=force_I_want_a_brick -V flashrom v0.9.2-r1136 on Linux 2.6.35-rc6-00127-g1a041a2 (i686), built with libpci 3.1.7, GCC 4.5.0 20100601 (release), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 3 usecs, 1120M loops per second, 10 myus = 10 us, 100 myus = 91 us, 1000 myus = 903 us, 10000 myus = 11668 us, 12 myus = 14 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Compaq nc4200 (PV983AW#ABU) " DMI string system-version: "F.0B" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "0938" DMI string baseboard-version: "KBC Version 38.59" DMI string chassis-type: "Notebook" Laptop detected via DMI ======================================================================== WARNING! You seem to be running flashrom on a laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user specified laptop=force_I_want_a_brick Found chipset "Intel ICH6-M", enabling flash write... chipset PCI ID is 8086:2641, 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: FWH. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5a Found chip "SST SST49LF008A" (1024 KB, FWH) at physical address 0xfff00000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Lock status for 0x080000 (size 0x010000) is 00, full access Lock status for 0x090000 (size 0x010000) is 00, full access Lock status for 0x0a0000 (size 0x010000) is 00, full access Lock status for 0x0b0000 (size 0x010000) is 00, full access Lock status for 0x0c0000 (size 0x010000) is 00, full access Lock status for 0x0d0000 (size 0x010000) is 00, full access Lock status for 0x0e0000 (size 0x010000) is 00, full access Lock status for 0x0f0000 (size 0x010000) is 00, full access Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x8f, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x01, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x42, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5a Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No operations were specified. [przemo@pldmachine ~/flashrom]$ sudo /usr/local/sbin/superiotool -deV superiotool r5689 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x8400, id=0x000f Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x0f00, rev=0x0 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0x0f, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Found SMSC LPC47N217 (id=0x7a, rev=0x01) at 0x4e No dump available for this Super I/O No extra registers known for this chip. Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. [przemo@pldmachine ~/flashrom]$ /sbin/lspci -nnvvvxxx 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00: 86 80 90 25 06 00 90 20 03 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0a00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 2000 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at d0a80000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00: 86 80 92 25 07 00 90 00 03 00 00 03 00 00 80 00 10: 00 00 a0 d0 01 20 00 00 08 00 00 c0 00 00 a8 d0 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0b00000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00: 86 80 92 27 07 00 90 00 03 00 80 03 00 00 80 00 10: 00 00 b0 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0000000-d03fffff Prefetchable memory behind bridge: 0000000044000000-00000000441fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00: 86 80 60 26 07 00 10 00 03 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 10 10 00 30 30 00 00 20: 00 d0 30 d0 01 44 11 44 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 44200000-443fffff Prefetchable memory behind bridge: 0000000044400000-00000000445fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00: 86 80 62 26 07 00 10 00 03 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 20 20 00 40 40 00 00 20: 20 44 30 44 41 44 51 44 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 04 00 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at 2020 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 58 26 05 00 80 02 03 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 20 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 2040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 59 26 05 00 80 02 03 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 20 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 4: I/O ports at 2060 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 5a 26 05 00 80 02 03 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 20 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 0: Memory at d0b80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 86 80 5c 26 06 00 90 02 03 20 03 0c 00 00 00 00 10: 00 00 b8 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0400000-d09fffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00: 86 80 48 24 07 01 10 00 d3 01 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 06 20 50 50 80 22 20: 40 d0 90 d0 01 40 f1 43 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 2100 [size=256] Region 1: I/O ports at 2200 [size=64] Region 2: Memory at d0b81000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0b82000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00: 86 80 6e 26 07 00 90 02 03 00 01 04 00 00 00 00 10: 01 21 00 00 01 22 00 00 00 10 b8 d0 00 20 b8 d0 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng 00: 86 80 41 26 07 00 00 02 03 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 2240 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00: 86 80 6f 26 05 00 80 02 03 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 41 22 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:12f6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200 00: 86 80 20 42 06 00 90 02 05 00 80 02 10 40 00 00 10: 00 00 40 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f6 12 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 03 18 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031] Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 48000000-4bfff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00: 4c 10 31 80 07 00 10 02 00 00 07 06 10 a8 82 00 10: 00 10 40 d0 a0 00 00 02 02 03 06 b0 00 00 00 40 20: 00 f0 ff 43 00 00 00 48 00 f0 ff 4b 00 50 00 00 30: fc 50 00 00 00 54 00 00 fc 54 00 00 0a 01 c0 05 40: 3c 10 38 09 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033] Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 10 Region 0: Memory at d0402000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> 00: 4c 10 33 80 06 00 10 02 00 00 80 01 10 40 80 00 10: 00 20 40 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 07 04 02:06.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034] (prog-if 01) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 10 Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=256] Region 1: Memory at d0405000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at d0406000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 00: 4c 10 34 80 06 00 10 02 00 01 05 08 10 40 80 00 10: 00 40 40 d0 00 50 40 d0 00 60 40 d0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 07 04 02:06.5 Communication controller [0780]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller [104c:8035] Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 10 Region 0: Memory at d0407000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at d0408000 (32-bit, non-prefetchable) [size=4K] Region 2: Memory at d0409000 (32-bit, non-prefetchable) [size=4K] Region 3: Memory at d040a000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00: 4c 10 35 80 02 00 10 02 00 00 80 07 00 00 80 00 10: 00 70 40 d0 00 80 40 d0 00 90 40 d0 00 a0 40 d0 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 38 09 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 04 00 00 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11) Subsystem: Hewlett-Packard Company Device [103c:0938] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 00: e4 14 7d 16 06 00 10 00 11 00 00 02 10 00 00 00 10: 04 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 00 00 00 3c 10 38 09 30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00 -- Przemo Firszt

1 0

Flashrom -V output from Tyan S2915
by Richard W.M. Jones 10 Aug '10

10 Aug '10

It still doesn't work for me. The ROM image supplied by Tyan is larger than 1MB and flashrom reports: Error: Image size doesn't match Presumably there is some sort of header in the image file. Anyway, I hope this output is useful to you in some way. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones libguestfs lets you edit virtual machines. Supports shell scripting, bindings from many languages. http://et.redhat.com/~rjones/libguestfs/ See what it can do: http://et.redhat.com/~rjones/libguestfs/recipes.html

4 7

Re: [flashrom] [coreboot] Winflashrom plans
by Carl-Daniel Hailfinger 10 Aug '10

10 Aug '10

Hi Darmawan, nice to see you're back. flashrom has its own mailing list and I added it to CC. On 15.06.2010 21:56, Darmawan Salihun wrote: > Sorry, I haven't been able to update Winflashrom for more than 3 years now. > I'm planning to add Windows 7 support next month. > Nice! > Therefore, I'm looking for suggestions. > > A bit of Winflashrom background of the currently available Winflashrom > (at flashrom.org): > > The programming model: > a. User mode application: > - Mostly "pure" flashrom source code recompiled with MinGW. > Current flashrom can be compiled with MinGW and Cygwin, but it doesn't support any PCI accesses (USB and serial work). > - libpci recompiled with MinGW (for PCI access logic). This is > required because > the PCI access functions in the Windows API is not guaranteed > (marked as obsolete), > in Windows XP SP2 and Windows 2003 server back then. > If the PCI access functions are still available in Windows 7, can we simply ignore the "deprecated" warnings? CF8/CFC accesses from userspace are not atomic and might cause mixed up PCI accesses. > b. Device driver: > - Provides POSIX mmap() implementation in the kernel, i.e. > provides an entrypoint for mmap() function to user mode application. > Please note that we need two types of memory mapping: sys_physmap_ro_cached() and sys_physmap_rw_uncached(). For example, the low memory mapping for coreboot tables uses the readonly cached variant, and any future DMI string access will also use the readonly cached variant. Any MMIO areas (including flash access) use the uncached rw variant. Some operating systems do not care at all about cached/uncached mapping (they simply use the default caching settings of that memory region), and for those you can use the uncached rw access for both access types. > - Provides direct I/O port access for libpci. > > Well, the reason for these programming model is to reduce the burden > when moving to newer flash chip support because this programming model > "preserves" the POSIX API in the user mode application (the device > driver is generic enough). > Therefore, "only" the user mode application need to be recompiled to > support new flash chip. > > Any suggestions on what to change from the current programming model? > Current flashrom already supports PCI device flashing and onboard flashing on DOS, Linux, FreeBSD, NetBSD, DragonFlyBSD, OpenSolaris, Mac OS X and a few others. Please take a look at hwaccess.c and hwaccess.h and physmap.c for things you might want to change for Windows PCI support. I expect Windows support in flashrom to need ~60 lines of code, maybe less. The device driver (and libpci support) is a different question, though. If you have to modify any file except hwaccess.c, hwaccess.h, physmap.c or Makefile please tell us. If you have any questions, feel free to ask at flashrom(a)flashrom.org or in #flashrom on irc.freenode.net. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 3

MS-7309
by ikerc ＠web 10 Aug '10

10 Aug '10

attached

1 0

Re: [flashrom] Flashrom Issues
by Johnson, Je 10 Aug '10

10 Aug '10

Helge, Unable to recover the server that was corrupted yesterday. I've followed the procedures provided by Supermicro and I'm going to have to send back the server to be re-flashed. During my initial testing I back leveled the BIOS to 1.0B and with "flashrom" I was able to move the BIOS to version 1.1 and it boot just fine. My second test which caused the corrupted state was a change in a setting of the 1.1 BIOS (to ensure if an maintainer makes a BIOS change I can recover by loading up the original settings) and a reboot which work. When I reload 1.1 with the original settings it finished correctly but now I'm failing to boot? Thanks again, John From: Johnson, Je Sent: Tuesday, August 10, 2010 8:40 AM To: 'Wagner, Helge (GE Intelligent Platforms)' Cc: flashrom(a)flashrom.org Subject: RE: [flashrom] Flashrom Issues Helge, Thanks for the information concerning the SPI ROMs errors. I'll test the patch this morning and let you know the results. I'm still a little concerned that reloading the same BIOS and rebooting caused my server to stop booting and I'm not seeing any displays? I did run a verify after flashing the BIOS and everything seemed fine. I'm the OS technical lead here in Manassas and I support over 12 different programs. I'm pushing to start using the "flashrom" program for all of our BIOS updates (as long as the motherboards are supported). It's time we get away from the floppy/CD solution of installing and updating the BIOS. Thanks again, John From: Wagner, Helge (GE Intelligent Platforms) [mailto:Helge.Wagner@ge.com] Sent: Tuesday, August 10, 2010 2:53 AM To: Johnson, Je Cc: flashrom(a)flashrom.org Subject: EXTERNAL: RE: [flashrom] Flashrom Issues You can ignore these "spi_block_erase_xx failed" errors as for the SPI ROMs there are some erase functions defined (with different block sizes), and when at least one of them is successful, the erase will finally work. And as you told it stated that it was successfully, so what you have in the flash should be the same as in the file. Can you try to clear the RTC/CMOS RAM? (remove battery for 10 minutes, use a jumper if available, see manual)? If that doesn't help: follow the procedure outlined in the "AMI BIOS Recovery" manual at http://www.supermicro.com/support/manuals/ Some additional notes about the erase error messages: The errors occur because on the ICH SPI engines you have to program a list of supported commands. This list is filled at program start with the most common SPI commands, and if one of the commands used by the erase functions is not in this list, this specific erase will fail (but as told before: one of the erase functions defined for your SPI flash chips should work). I have created a patch to dynamically re-program the list of supported commands on-the-fly, so that no command should fail after the patch is applied. You can find the patch here: http://www.flashrom.org/pipermail/flashrom/2010-August/004331.html ("[flashrom] Speedup SST 25VF032B and 25VF064C programming"). Regards, Helge ________________________________ From: flashrom-bounces(a)flashrom.org [mailto:flashrom-bounces@flashrom.org] On Behalf Of Johnson, Je Sent: Montag, 9. August 2010 21:38 To: flashrom(a)flashrom.org Subject: [flashrom] Flashrom Issues I've been working with a Supermicro X8DA3/DAI mother board running with RHEL ES 5.4 (2.6.30.9). I compiled the latest version of "flashrom 0.9.2) and was able to capture my current BIOS by running "flashrom -r X8DA3.BIOS". After capturing the BIOS I reloaded it by issuing the following command "flashrom -w X8DA3.BIOS". I was told that the write was successful, but saw the following errors: Writing flash chip... Erasing flash before programming Erasing Flash Chip... spi_block_erase_20 failed during command execution at address 0x0 Spi_block_erase_52 failed during command execution at address 0x0 Since it stated that it was successfully, I simply reset the server and now it's failing to boot? Any help in understanding in what went wrong or if my motherboard is not fully support ( I did run the check initially to ensure the chipset was support). Thanks, John Johnson Lockheed Martin Manassas, VA

2 1

Re: [flashrom] Flashrom Issues
by Johnson, Je 10 Aug '10

10 Aug '10

Helge, Thanks for the information concerning the SPI ROMs errors. I'll test the patch this morning and let you know the results. I'm still a little concerned that reloading the same BIOS and rebooting caused my server to stop booting and I'm not seeing any displays? I did run a verify after flashing the BIOS and everything seemed fine. I'm the OS technical lead here in Manassas and I support over 12 different programs. I'm pushing to start using the "flashrom" program for all of our BIOS updates (as long as the motherboards are supported). It's time we get away from the floppy/CD solution of installing and updating the BIOS. Thanks again, John From: Wagner, Helge (GE Intelligent Platforms) [mailto:Helge.Wagner@ge.com] Sent: Tuesday, August 10, 2010 2:53 AM To: Johnson, Je Cc: flashrom(a)flashrom.org Subject: EXTERNAL: RE: [flashrom] Flashrom Issues You can ignore these "spi_block_erase_xx failed" errors as for the SPI ROMs there are some erase functions defined (with different block sizes), and when at least one of them is successful, the erase will finally work. And as you told it stated that it was successfully, so what you have in the flash should be the same as in the file. Can you try to clear the RTC/CMOS RAM? (remove battery for 10 minutes, use a jumper if available, see manual)? If that doesn't help: follow the procedure outlined in the "AMI BIOS Recovery" manual at http://www.supermicro.com/support/manuals/ Some additional notes about the erase error messages: The errors occur because on the ICH SPI engines you have to program a list of supported commands. This list is filled at program start with the most common SPI commands, and if one of the commands used by the erase functions is not in this list, this specific erase will fail (but as told before: one of the erase functions defined for your SPI flash chips should work). I have created a patch to dynamically re-program the list of supported commands on-the-fly, so that no command should fail after the patch is applied. You can find the patch here: http://www.flashrom.org/pipermail/flashrom/2010-August/004331.html ("[flashrom] Speedup SST 25VF032B and 25VF064C programming"). Regards, Helge ________________________________ From: flashrom-bounces(a)flashrom.org [mailto:flashrom-bounces@flashrom.org] On Behalf Of Johnson, Je Sent: Montag, 9. August 2010 21:38 To: flashrom(a)flashrom.org Subject: [flashrom] Flashrom Issues I've been working with a Supermicro X8DA3/DAI mother board running with RHEL ES 5.4 (2.6.30.9). I compiled the latest version of "flashrom 0.9.2) and was able to capture my current BIOS by running "flashrom -r X8DA3.BIOS". After capturing the BIOS I reloaded it by issuing the following command "flashrom -w X8DA3.BIOS". I was told that the write was successful, but saw the following errors: Writing flash chip... Erasing flash before programming Erasing Flash Chip... spi_block_erase_20 failed during command execution at address 0x0 Spi_block_erase_52 failed during command execution at address 0x0 Since it stated that it was successfully, I simply reset the server and now it's failing to boot? Any help in understanding in what went wrong or if my motherboard is not fully support ( I did run the check initially to ensure the chipset was support). Thanks, John Johnson Lockheed Martin Manassas, VA

1 0

← Newer
1
...
11
12
13
14
15
16
17
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom August 2010