flashrom August 2010

flashrom@flashrom.org

77 participants
209 discussions

Start a nNew thread

[PATCH] MSI MS-6787 board enable
by Jon Shadow 16 Aug '10

16 Aug '10

Here's a patch that should make swiftgeek's board work. Signed-off-by: Sergey A Lichack <shadowpilot34(a)gmail.com>

2 1

[PATCH] Board enable for Abit VA6
by Mattias Mattsson 16 Aug '10

16 Aug '10

Hi, This adds board enable for Abit VA6. I'm not sure if the DMI matching here is good enough, maybe we should require the -m option. There is support in flashrom for a similar abit board (VT6X4) which currently requires this. -mattias

2 3

[commit] r1143 - trunk
by repository service 16 Aug '10

16 Aug '10

Author: mkarcher Date: Mon Aug 16 00:43:23 2010 New Revision: 1143 URL: http://flashrom.org/trac/coreboot/changeset/1143 Log: Add board enable for Abit VA6 lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004440.html Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Aug 16 00:35:31 2010 (r1142) +++ trunk/board_enable.c Mon Aug 16 00:43:23 2010 (r1143) @@ -1489,6 +1489,7 @@ /* * Suited for: * - abit VT6X4: Pro133x + VT82C686A + * - abit VA6: Pro133x + VT82C686A */ static int via_apollo_gpo4_lower(void) { @@ -1759,6 +1760,7 @@ {0x10de, 0x0050, 0x147b, 0x1c1a, 0, 0, 0, 0, NULL, NULL, NULL, "abit", "KN8 Ultra", 0, NT, nvidia_mcp_gpio2_lower}, {0x10de, 0x01e0, 0x147b, 0x1c00, 0x10de, 0x0060, 0x147B, 0x1c00, NULL, NULL, NULL, "abit", "NF7-S", 0, OK, nvidia_mcp_gpio8_raise}, {0x10de, 0x02f0, 0x147b, 0x1c26, 0x10de, 0x0240, 0x10de, 0x0222, NULL, NULL, NULL, "abit", "NF-M2 nView", 0, NT, nvidia_mcp_gpio4_lower}, + {0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, "(VA6)$", NULL, NULL, "abit", "VA6", 0, OK, via_apollo_gpo4_lower}, {0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, NULL, "abit", "vt6x4", "abit", "VT6X4", 0, OK, via_apollo_gpo4_lower}, {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, OK, w83627hf_gpio24_raise_2e}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Mon Aug 16 00:35:31 2010 (r1142) +++ trunk/print.c Mon Aug 16 00:43:23 2010 (r1143) @@ -288,6 +288,7 @@ B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), + B("abit", "VA6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), B("Acorp", "6A815EPD", 1, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), B("Advantech", "PCM-5820", 1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),

1 0

[PATCH] Check availability of GPO lines on Intel PIIX4
by Mattias Mattsson 16 Aug '10

16 Aug '10

Hi, I'm not a skilled programmer so this patch may look rather ugly. (Suggestions to improve it are very welcome.) Anyways, this changes the intel_piix4_gpo_set() function to always check the GENCFG and XBCS register for the availability of the requested GPO line (unless called with safe=0) before raising/lowering it. This behaviour was suggested by Michael Karcher on the flashrom mailing list and this is an attempt implementing it. Also adds a board enable for Asus P2B-N. Probe/Read/Write/Erease tested and works with this board. Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Index: board_enable.c =================================================================== --- board_enable.c (revision 1091) +++ board_enable.c (working copy) @@ -947,13 +947,67 @@ } /** + * Helper function to check if a given gpo line is available on Intel PIIX4{,E,M}. + */ +static int intel_piix4_gpo_available(unsigned int gpo, struct pci_dev *pci_dev) +{ + + uint32_t gencfg; + uint16_t xbcs; + + gencfg = pci_read_long(pci_dev, 0xB0); /* GENCFG */ + xbcs = pci_read_word(pci_dev, 0x4E); /* XBCS */ + + if ((gpo == 0)) { + return 1; /* GPO0 is always available */ + + } else if ((gpo >= 1) && (gpo <= 7)) { + return ((gencfg & 1) == 0); /* GENCFG bit 0 */ + + } else if ((gpo == 8)) { + return -1; /* GPO8 is never available */ + + } else if ((gpo >= 9) && (gpo <= 11)) { + return ((gencfg & (1 << (gpo - 1))) == 0); /* GENCFG bit 8-10 */ + + } else if ((gpo >= 12) && (gpo <= 14)) { + return ((xbcs & (1 << 8)) == 0); /* XBCS bit 8 */ + + } else if ((gpo >= 15) && (gpo <= 16)) { + return ((gencfg & (1 << 17)) == 1); /* GENCFG bit 17 */ + + } else if ((gpo >= 17) && (gpo <= 21)) { + return ((gencfg & (1 << (gpo + 1))) == 1); /* GENCFG bit 18-22 */ + + } else if ((gpo >= 22) && (gpo <= 23)) { + return ((gencfg & (1 << 28)) == 1); /* GENCFG bit 28 */ + + } else if ((gpo >= 24) && (gpo <= 26)) { + return ((gencfg & (1 << (gpo + 5))) == 1); /* GENCFG bit 29-31 */ + + } else if ((gpo >= 27) && (gpo <= 28)) { + return 1; /* GPO27-28 is always available */ + + } else if ((gpo == 29)) { + return ((xbcs & (1 << 8)) == 0); /* XBCS bit 8 */ + + } else if ((gpo == 30)) { + return 1; /* GPO30 is always available */ + + } else { + return -1; + } +} + +/** * Helper function to raise/drop a given gpo line on Intel PIIX4{,E,M}. */ -static int intel_piix4_gpo_set(unsigned int gpo, int raise) +static int intel_piix4_gpo_set(unsigned int gpo, int raise, int safe) { unsigned int gpo_byte, gpo_bit; struct pci_dev *dev; uint32_t tmp, base; + uint16_t tmp2; dev = pci_dev_find(0x8086, 0x7110); /* Intel PIIX4 ISA bridge */ if (!dev) { @@ -967,36 +1021,86 @@ return -1; } - /* these are dual function pins which are most likely in use already */ - if (((gpo >= 1) && (gpo <= 7)) || - ((gpo >= 9) && (gpo <= 21)) || (gpo == 29)) { - msg_perr("\nERROR: Unsupported PIIX4 GPO%d.\n", gpo); - return -1; - } + if (safe) { + if (intel_piix4_gpo_available(gpo, dev) == -1) { + msg_perr("\nERROR: Intel PIIX4 GPO%d not available.\n", gpo); + return -1; + } + } else { + /* dual function that need special enable. */ - /* dual function that need special enable. */ - if ((gpo >= 22) && (gpo <= 26)) { - tmp = pci_read_long(dev, 0xB0); /* GENCFG */ + tmp = pci_read_long(dev, 0xB0); /* GENCFG */ + tmp2 = pci_read_word(dev, 0x4E); /* XBCS */ switch (gpo) { - case 22: /* XBUS: XDIR#/GPO22 */ - case 23: /* XBUS: XOE#/GPO23 */ - tmp |= 1 << 28; + case 0: break; - case 24: /* RTCSS#/GPO24 */ - tmp |= 1 << 29; + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + tmp &= ~(1 << 0); /* GENCFG bit 0: 0 = GPI0+GPO1-7 / 1 = IOCHK#+LA17-23 */ break; - case 25: /* RTCALE/GPO25 */ - tmp |= 1 << 30; + case 8: break; - case 26: /* KBCSS#/GPO26 */ - tmp |= 1 << 31; + case 9: + tmp &= ~(1 << 8); /* GENCFG bit 8: 0 = GPI2+GPO9 / 1 = PC/PCI REQA+GNTA */ break; - } - pci_write_long(dev, 0xB0, tmp); - } + case 10: + tmp &= ~(1 << 9); /* GENCFG bit 9: 0 = GPI3+GPO10 / 1 = PC/PCI REQB+GNTB */ + break; + case 11: + tmp &= ~(1 << 10); /* GENCFG bit 10: 0 = GPI4+GPO11 / 1 = PC/PCI REQC+GNTC */ + break; + case 12: + case 13: + case 14: + case 29: + tmp2 &= ~(1 << 8); /* XBCS bit 8: 0 = GPI5+GPO12-14+GPO29 / 1 = APIC Chip select */ + break; + case 15: + case 16: + tmp |= 1 << 17; /* GENCFG bit 17: 0 = SUSB#+SUSC# / 1 = GPO15+GPO16 */ + break; + case 17: + tmp |= 1 << 18; /* GENCFG bit 18: 0 = CPU_STP# / 1 = GPO17 */ + break; + case 18: + tmp |= 1 << 19; /* GENCFG bit 19: 0 = PCI_STP# / 1 = GPO18 */ + break; + case 19: + tmp |= 1 << 20; /* GENCFG bit 20: 0 = ZZ / 1 = GPO19 */ + break; + case 20: + tmp |= 1 << 21; /* GENCFG bit 21: 0 = SUS_STAT1# / 1 = GPO20 */ + break; + case 21: + tmp |= 1 << 22; /* GENCFG bit 22: 0 = SUS_STAT2# / 1 = GPO21 */ + break; + case 22: + case 23: + tmp |= 1 << 28; /* GENCFG bit 28: 0 = XDIR#+XDIR# / 1 = GPO22+GPO23 */ + break; + case 24: + tmp |= 1 << 29; /* GENCFG bit 29: 0 = RTCSS# / 1 = GPO24 */ + break; + case 25: + tmp |= 1 << 30; /* GENCFG bit 30: 0 = RTCALE / 1 = GPO25 */ + break; + case 26: + tmp |= 1 << 31; /* GENCFG bit 31: 0 = KBCSS# / 1 = GPO26 */ + break; + case 27: + case 28: + case 30: + break; + } + pci_write_long(dev, 0xB0, tmp); + pci_write_word(dev, 0x4E, tmp2); + } - /* GPO {0,8,27,28,30} are always available. */ - dev = pci_dev_find(0x8086, 0x7113); /* Intel PIIX4 PM */ if (!dev) { msg_perr("\nERROR: Intel PIIX4 PM not found.\n"); @@ -1023,15 +1127,23 @@ */ static int board_epox_ep_bx3(void) { - return intel_piix4_gpo_set(22, 1); + return intel_piix4_gpo_set(22, 1, 1); } /** + * Suited for Asus P2B-N + */ +static int intel_piix4_gpo18_lower(void) +{ + return intel_piix4_gpo_set(18, 0, 1); +} + +/** * Suited for Intel SE440BX-2 */ static int intel_piix4_gpo27_lower(void) { - return intel_piix4_gpo_set(27, 0); + return intel_piix4_gpo_set(27, 0, 1); } /** @@ -1672,6 +1784,7 @@ {0x10de, 0x0264, 0x1043, 0x81bc, 0x10de, 0x02f0, 0x1043, 0x81cd, NULL, NULL, NULL, "ASUS", "A8N-VM CSM", 0, NT, w83627ehf_gpio24_raise_2e}, {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise}, {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise}, + {0x8086, 0x7190, 0, 0, 0x8086, 0x7191, 0, 0, "^P2B-N$", NULL, NULL, "ASUS", "P2B-N", 0, OK, intel_piix4_gpo18_lower}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise},

2 5

[commit] r1142 - trunk
by repository service 16 Aug '10

16 Aug '10

Author: mkarcher Date: Mon Aug 16 00:35:31 2010 New Revision: 1142 URL: http://flashrom.org/trac/coreboot/changeset/1142 Log: Check availability of GPO lines on Intel PIIX4 This patch changes the intel_piix4_gpo_set() function to always check the GENCFG and XBCS registers for the availability of the requested GPO line before raising/lowering it and fails otherwise. It makes no attempt to bypass the values in these configuration registers. The old flashrom code did consider it safe to reprogram (multiplexed) GPO:s 22-26 without checking the value of the controlling register (GENCFG). I do not really know why. I have tested this patch on an Asus P2B-N (needs GPO18 low) and MSI MS-6163 Pro (needs GPO14 high). The information for these registers are from the Intel "82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)" datasheet available here: http://www.intel.com/design/intarch/datashts/29056201.pdf Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Aug 15 17:26:30 2010 (r1141) +++ trunk/board_enable.c Mon Aug 16 00:35:31 2010 (r1142) @@ -997,6 +997,43 @@ struct pci_dev *dev; uint32_t tmp, base; + static const uint32_t nonmuxed_gpos = 0x58000101; /* GPPO {0,8,27,28,30} are always available */ + + static const struct {unsigned int reg, mask, value; } piix4_gpo[] = { + {0}, + {0xB0, 0x0001, 0x0000}, /* GPO1... */ + {0xB0, 0x0001, 0x0000}, + {0xB0, 0x0001, 0x0000}, + {0xB0, 0x0001, 0x0000}, + {0xB0, 0x0001, 0x0000}, + {0xB0, 0x0001, 0x0000}, + {0xB0, 0x0001, 0x0000}, /* ...GPO7: GENCFG bit 0 */ + {0}, + {0xB0, 0x0100, 0x0000}, /* GPO9: GENCFG bit 8 */ + {0xB0, 0x0200, 0x0000}, /* GPO10: GENCFG bit 9 */ + {0xB0, 0x0400, 0x0000}, /* GPO11: GENCFG bit 10 */ + {0x4E, 0x0100, 0x0000}, /* GPO12... */ + {0x4E, 0x0100, 0x0000}, + {0x4E, 0x0100, 0x0000}, /* ...GPO14: XBCS bit 8 */ + {0xB2, 0x0002, 0x0002}, /* GPO15... */ + {0xB2, 0x0002, 0x0002}, /* ...GPO16: GENCFG bit 17 */ + {0xB2, 0x0004, 0x0004}, /* GPO17: GENCFG bit 18 */ + {0xB2, 0x0008, 0x0008}, /* GPO18: GENCFG bit 19 */ + {0xB2, 0x0010, 0x0010}, /* GPO19: GENCFG bit 20 */ + {0xB2, 0x0020, 0x0020}, /* GPO20: GENCFG bit 21 */ + {0xB2, 0x0040, 0x0040}, /* GPO21: GENCFG bit 22 */ + {0xB2, 0x1000, 0x1000}, /* GPO22... */ + {0xB2, 0x1000, 0x1000}, /* ...GPO23: GENCFG bit 28 */ + {0xB2, 0x2000, 0x2000}, /* GPO24: GENCFG bit 29 */ + {0xB2, 0x4000, 0x4000}, /* GPO25: GENCFG bit 30 */ + {0xB2, 0x8000, 0x8000}, /* GPO26: GENCFG bit 31 */ + {0}, + {0}, + {0x4E, 0x0100, 0x0000}, /* ...GPO29: XBCS bit 8 */ + {0} + }; + + dev = pci_dev_find(0x8086, 0x7110); /* Intel PIIX4 ISA bridge */ if (!dev) { msg_perr("\nERROR: Intel PIIX4 ISA bridge not found.\n"); @@ -1009,36 +1046,12 @@ return -1; } - /* These are dual function pins which are most likely in use already. */ - if (((gpo >= 1) && (gpo <= 7)) || - ((gpo >= 9) && (gpo <= 21)) || (gpo == 29)) { - msg_perr("\nERROR: Unsupported PIIX4 GPO%d.\n", gpo); - return -1; + if ( (((1 << gpo) & nonmuxed_gpos) == 0) && + (pci_read_word(dev, piix4_gpo[gpo].reg) & piix4_gpo[gpo].mask) != piix4_gpo[gpo].value ) { + msg_perr("\nERROR: PIIX4 GPO\%d not programmed for output.\n", gpo); + return -1; } - /* Dual function that need special enable. */ - if ((gpo >= 22) && (gpo <= 26)) { - tmp = pci_read_long(dev, 0xB0); /* GENCFG */ - switch (gpo) { - case 22: /* XBUS: XDIR#/GPO22 */ - case 23: /* XBUS: XOE#/GPO23 */ - tmp |= 1 << 28; - break; - case 24: /* RTCSS#/GPO24 */ - tmp |= 1 << 29; - break; - case 25: /* RTCALE/GPO25 */ - tmp |= 1 << 30; - break; - case 26: /* KBCSS#/GPO26 */ - tmp |= 1 << 31; - break; - } - pci_write_long(dev, 0xB0, tmp); - } - - /* GPO {0,8,27,28,30} are always available. */ - dev = pci_dev_find(0x8086, 0x7113); /* Intel PIIX4 PM */ if (!dev) { msg_perr("\nERROR: Intel PIIX4 PM not found.\n"); @@ -1064,7 +1077,7 @@ * Suited for: * - EPoX EP-BX3 */ -static int board_epox_ep_bx3(void) +static int intel_piix4_gpo22_raise(void) { return intel_piix4_gpo_set(22, 1); } @@ -1778,7 +1791,7 @@ {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, OK, NULL}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, "EPoX", "EP-8K5A2", 0, OK, w836xx_memw_enable_2e}, {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, "EPoX", "EP-8RDA3+", 0, OK, nvidia_mcp_gpio31_raise}, - {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", "EPoX", "EP-BX3", 0, OK, board_epox_ep_bx3}, + {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", "EPoX", "EP-BX3", 0, NT, intel_piix4_gpo22_raise}, {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise},

1 0

ASUSTek P4P800
by Jason Cochrane 15 Aug '10

15 Aug '10

*http://support.asus.com/download/download.aspx?SLanguage=en-us Model: Socket478 P4P800 Version 1019 $ flashrom -V* flashrom v0.9.2-r1138 on Linux 2.6.31-21-generic-pae (i686), built with libpci 3.0.0, GCC 4.4.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1486M loops per second, delay more than 10% too short (got 81% of expected delay), recalculating... 1600M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 1625M loops per second, delay more than 10% too short (got 87% of expected delay), recalculating... 1588M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 1574M loops per second, delay loop is unreliable, trying to continue 10 myus = 9 us, 100 myus = 226 us, 1000 myus = 1039 us, 10000 myus = 9821 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASUSTek Computer Inc." DMI string baseboard-product-name: "P4P800" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH5/ICH5R", enabling flash write... chipset PCI ID is 8086:24d0, BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: FWH. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x21, id2 0xb8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No operations were specified. *$ lspci -nnvvvxxx* 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80f2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Capabilities: [e4] Vendor Specific Information <?> Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00 10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f2 80 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 02 08 00 40 80 1c 00 00 00 00 00 00 00 00 00 60: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 11 11 00 00 33 33 00 00 00 00 00 00 0a 38 00 a0: 02 00 30 00 1b 4a 00 1f 02 03 00 00 00 00 00 00 b0: 80 00 00 00 20 00 00 00 00 00 62 2f 20 10 00 00 c0: 00 00 00 00 00 40 0e 20 00 00 00 00 00 00 00 00 d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 20 01 e0: 00 00 00 00 09 a0 06 21 00 02 00 00 00 00 00 00 f0: 00 00 00 00 02 00 00 00 68 0f 03 00 00 00 00 00 00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: cff00000-efefffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 71 25 07 01 a0 00 02 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 c0 c0 a0 22 20: 90 fe 90 fe f0 cf e0 ef 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00 00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K] 00: 86 80 76 25 02 00 80 00 02 00 80 08 00 00 00 00 10: 00 00 cf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 43 65 10 04 00 00 00 00 04 00 00 00 00 00 00 00 50: 01 00 80 00 02 01 80 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 55 05 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 08 00 b0: 00 00 00 00 f0 43 fc 7d 01 00 00 00 09 00 00 00 c0: 00 08 00 00 20 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff 3f e0: 01 00 00 00 00 00 01 02 ff 0e 00 00 00 00 04 00 f0: 00 0c 02 00 00 00 00 00 68 0f 03 00 74 f8 00 00 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ef00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ef20 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ef40 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ef80 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 fc bf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 c0 70: 00 00 c7 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 55 55 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 80 00 00 88 83 40 00 66 0f 04 00 06 14 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 40 d0 d0 80 22 20: a0 fe a0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 51 33 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 01 00 50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00 60: 8a 8b 85 87 d0 00 00 00 80 85 8b 8b 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 01 00 00 00 0d 00 00 00 00 03 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00 e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45 f0: 00 00 44 00 04 00 00 00 66 0f 04 1e 00 00 00 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00: 86 80 db 24 07 00 80 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fc 00 00 00 00 00 40 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 77 e3 33 e3 bb 00 00 00 0f 00 11 22 00 00 00 00 50: 00 00 00 00 30 30 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at ee80 [size=64] Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00 10: 01 e8 00 00 81 ee 00 00 00 f8 bf fe 00 f4 bf fe 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f3 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00 40: 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200] [1002:5961] (rev 01) Subsystem: C.P. Technology Co. Ltd Device [148c:2069] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: radeon, radeonfb 00: 02 10 61 59 07 01 b0 02 01 00 00 03 04 40 00 00 10: 08 00 00 d0 01 c0 00 00 00 00 9f fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 8c 14 69 20 30: 00 00 9c fe 58 00 00 00 00 00 00 00 0a 01 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 8c 14 69 20 50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff 60: 02 43 00 1f 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:05.0 Ethernet controller [0200]: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] [10b7:1700] (rev 12) Subsystem: ASUSTeK Computer Inc. Device [1043:80eb] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at d800 [size=256] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Kernel driver in use: skge Kernel modules: skge 00: b7 10 00 17 17 01 b0 02 12 00 00 02 04 40 00 00 10: 00 c0 af fe 01 d8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 eb 80 30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 17 1f 40: 00 00 b0 05 01 40 a0 01 01 50 02 fe 00 20 00 26 50: 03 00 00 80 00 00 00 00 00 00 04 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:0a.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k HSFi Modem [14f1:2f00] (rev 01) Subsystem: Conexant Systems, Inc. Device [14f1:2005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: Memory at feae0000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at dfe0 [size=8] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: f1 14 00 2f 07 01 90 02 01 00 80 07 00 40 00 00 10: 00 00 ae fe e1 df 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 14 05 20 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 00 22 c0 00 00 00 00 52 12 01 00 01 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:0b.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at d400 [size=256] Region 1: Memory at feafbc00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 8139too Kernel modules: epl, 8139too, 8139cp 00: ec 10 39 81 07 01 90 02 10 00 00 02 00 40 00 00 10: 01 d4 00 00 00 bc af fe 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:0d.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01) Subsystem: D-Link System Inc Device [1186:3a16] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fead0000 (32-bit, non-prefetchable) [size=64K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: ath5k Kernel modules: ath5k 00: 8c 16 1a 00 16 01 90 02 01 00 00 02 04 a8 00 00 10: 00 00 ad fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 01 50 00 00 86 11 16 3a 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 0a 1c 40: 00 00 00 00 01 00 c2 01 00 40 00 c6 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 *$ superiotool -deV* superiotool r3844 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x42fe, id=0x8282 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x8282, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627THF/THG (id=0x82, rev=0x82) at 0x2e Register dump: idx 20 21 22 23 24 25 26 28 29 2a 2b 2c 2d 2e 2f val 82 82 ff fe 42 00 00 00 00 00 10 00 00 00 ff def 82 NA ff 00 MM 00 MM 00 00 00 MM MM MM 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 03 78 00 04 3c def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 42 def 01 00 60 00 64 01 0c 80 LDN 0x07 (GPIO 1, GPIO 5, game port, MIDI port) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 val 08 02 01 03 30 00 ff ff ff ff cd 00 def 00 02 01 03 30 09 ff 00 00 ff 00 00 LDN 0x08 (GPIO 2) idx 30 f0 f1 f2 f3 f4 f5 f6 f7 val 00 ff ff ff 00 ff 00 00 00 def 00 ff 00 00 00 RR 00 00 00 LDN 0x09 (GPIO 3, GPIO 4) idx 30 f0 f1 f2 f3 f4 f5 f6 val 03 ef 5f 00 00 df 01 00 def 00 ff 00 00 00 ff 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff val 00 00 00 00 f0 6f 00 00 00 00 00 8f 37 00 00 00 00 00 00 def 00 00 00 00 MM MM 00 00 00 00 00 00 00 00 00 00 00 RR RR LDN 0x0b (Hardware monitor) idx 30 60 61 70 val 01 02 90 00 def 00 00 00 00 Hardware monitor (0x0295) Register dump: idx 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f val 01 ff 01 ff 00 00 00 00 01 01 01 01 3c 3c 0a 0a 01 ff 00 00 00 01 01 3c 42 00 ff ff 24 32 00 e2 5f c2 d3 ba ff 01 b3 21 95 db f0 00 d8 44 05 40 c6 06 80 e2 59 09 44 0a 30 08 28 00 54 00 00 03 c4 09 fe ff 00 00 6f 2d 03 01 c4 18 95 04 a3 def RR ff RR ff 00 00 00 00 01 01 01 01 3c 3c 0a 0a RR ff 00 00 00 01 01 3c 43 RR ff ff RR RR NA NA NA NA NA NA NA RR RR NA NA NA NA NA NA NA NA NA NA NA NA NA RR RR RR RR NA NA NA NA NA RR RR 03 00 00 fe ff RR RR 5f NA 03 RR 44 18 15 80 5c LDN 0x00 (Bank 0) idx 50 51 52 53 54 55 56 57 58 59 5d 5e 5f val ff ff 80 ff ff ff 00 80 90 20 84 ff 05 def NA NA NA NA NA NA 00 80 90 70 00 RR RR LDN 0x01 (Bank 1) idx 50 51 52 53 54 55 56 val 24 80 00 4b 00 50 00 def NA NA 00 4b 00 50 00 LDN 0x02 (Bank 2) idx 50 51 52 53 54 55 56 val d0 00 00 4b 00 50 00 def NA NA 00 4b 00 50 00 LDN 0x04 (Bank 4) idx 50 51 52 53 54 55 56 59 5a 5b val 03 13 00 00 fe 11 00 c4 09 03 def 00 ff RR 00 00 00 00 00 00 00 LDN 0x05 (Bank 5) idx 50 51 52 53 54 55 56 57 val ba 3a 00 00 53 0a 04 01 def NA NA RR RR NA NA NA NA LDN 0x06 (Bank 6) idx 50 val c8 def RR Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

2 1

[commit] r1141 - trunk
by repository service 15 Aug '10

15 Aug '10

Author: uwe Date: Sun Aug 15 17:26:30 2010 New Revision: 1141 URL: http://flashrom.org/trac/coreboot/changeset/1141 Log: Various board status updates and fixes (trivial). - There are number of boards that have board-enables in board-enable.c but have no corresponding entry in print.c (with or without URL doesn't matter) and thus appear neither in the "flashrom -L" list of boards nor in the wiki output. Fix this by adding entries for them in print.c. - abit AN-M2 - abit KN8 Ultra - ASUS A8Jm (laptop) - ASUS A8N (might need changing to "A8N-SLI Deluxe", see http://www.coreboot.org/pipermail/flashrom/2009-November/000878.html) - ASUS A8N-LA (Nagami-GL8E) - ASUS P4B533-E - ASUS P4S800-MX - HP ProLiant DL165 G6 - IBASE MB899 - Intel SE440BX-2 (marked as non-working for now though, due to http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html) - MSI MS-6577 (Xenon) - MSI MS-7207 (K8NGM2-L) - Fix / amend a few board names: - Add "ProLiant" name to the "DL145 G3" (and the new "DL165 G6"), we use such "series" names for various other boards (e.g. "Vectra" etc) and it also helps users googling for those names. - HP "Vectra VL400 PC" should be "Vectra VL400" really, I'm pretty sure the "PC" is not part of the board name but simply stands for "personal computer". Same for "Vectra VL420 SFF PC". - Change "ASUS A8JM" to "ASUS A8Jm" as per vendor website. - Add comments for boards which may be listed with incorrect names, I sent out clarification requests to the list, URLs listed as comment. - Add "Xenon" HP name to the "MSI MS-6577" OEM board. - Fix typo in "MS-7207 (K8N GM2-L)", should be "MS-7207 (K8NGM2-L)" as per vendor website. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Aug 15 16:36:18 2010 (r1140) +++ trunk/board_enable.c Sun Aug 15 17:26:30 2010 (r1141) @@ -867,8 +867,8 @@ /* * Suited for: - * - MSI K8N Neo4: NVIDIA CK804 - * - MSI K8N GM2-L: NVIDIA MCP51 + * - MSI K8N Neo4: NVIDIA CK804. TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. + * - MSI K8NGM2-L: NVIDIA MCP51 */ static int nvidia_mcp_gpio2_raise(void) { @@ -1295,7 +1295,7 @@ /* * Suited for: - * - ASUS A8JM: Intel 945 + ICH7 + * - ASUS A8Jm (laptop): Intel 945 + ICH7 */ static int intel_ich_gpio34_raise(void) { @@ -1758,9 +1758,9 @@ {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, - {0x8086, 0x27A0, 0x1043, 0x1287, 0x8086, 0x27DF, 0x1043, 0x1287, "^A8J", NULL, NULL, "ASUS", "A8JM", 0, NT, intel_ich_gpio34_raise}, + {0x8086, 0x27A0, 0x1043, 0x1287, 0x8086, 0x27DF, 0x1043, 0x1287, "^A8J", NULL, NULL, "ASUS", "A8Jm", 0, NT, intel_ich_gpio34_raise}, {0x10DE, 0x0260, 0x103c, 0x2a3e, 0x10DE, 0x0264, 0x103c, 0x2a3e, "NAGAMI2L", NULL, NULL, "ASUS", "A8N-LA (Nagami-GL8E)", 0, OK, nvidia_mcp_gpio0_raise}, - {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, NULL, NULL, NULL, "ASUS", "A8N", 0, NT, board_shuttle_fn25}, + {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, NULL, NULL, NULL, "ASUS", "A8N", 0, NT, board_shuttle_fn25}, /* TODO: This should probably be A8N-SLI Deluxe, see http://www.coreboot.org/pipermail/flashrom/2009-November/000878.html. */ {0x10de, 0x0264, 0x1043, 0x81bc, 0x10de, 0x02f0, 0x1043, 0x81cd, NULL, NULL, NULL, "ASUS", "A8N-VM CSM", 0, NT, w83627ehf_gpio24_raise_2e}, {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise}, {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise}, @@ -1783,11 +1783,11 @@ {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise}, - {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable}, - {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1648, 0x103c, 0x310f, NULL, "hp", "dl165_g6", "HP", "DL165 G6", 0, OK, board_hp_dl165_g6_enable}, + {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "ProLiant DL145 G3", 0, OK, board_hp_dl145_g3_enable}, + {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1648, 0x103c, 0x310f, NULL, "hp", "dl165_g6", "HP", "ProLiant DL165 G6", 0, OK, board_hp_dl165_g6_enable}, {0x8086, 0x2580, 0x103c, 0x2a08, 0x8086, 0x2640, 0x103c, 0x2a0a, NULL, NULL, NULL, "HP", "Puffer2-UL8E", 0, OK, intel_ich_gpio18_raise}, {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, - {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, + {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "Vectra VL420 SFF", 0, OK, intel_ich_gpio22_raise}, {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, nvidia_mcp_gpio5_raise}, {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "IBASE", "MB899", 0, OK, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, @@ -1796,8 +1796,8 @@ {0x1022, 0x7468, 0, 0, 0, 0, 0, 0, NULL, "iwill", "dk8_htx", "IWILL", "DK8-HTX", 0, OK, w83627hf_gpio24_raise_2e}, {0x8086, 0x27A0, 0x8086, 0x27a0, 0x8086, 0x27b8, 0x8086, 0x27b8, NULL, "kontron", "986lcd-m", "Kontron", "986LCD-M", 0, OK, board_kontron_986lcd_m}, {0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, "Mitac", "6513WU", 0, OK, board_mitac_6513wu}, - {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, - {0x8086, 0x2560, 0x1462, 0x5770, 0x8086, 0x2562, 0x1462, 0x5778, NULL, NULL, NULL, "MSI", "MS-6577", 0, OK, w83627hf_gpio25_raise_2e}, + {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, /* TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. */ + {0x8086, 0x2560, 0x1462, 0x5770, 0x8086, 0x2562, 0x1462, 0x5778, NULL, NULL, NULL, "MSI", "MS-6577 (Xenon)", 0, OK, w83627hf_gpio25_raise_2e}, {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)", 0, OK, board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio44_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, @@ -1806,7 +1806,7 @@ {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, {0x1106, 0x3149, 0x1462, 0x7061, 0x1106, 0x3227, 0, 0, NULL, NULL, NULL, "MSI", "MS-7061 (KM4M-V/KM4AM-V)", 0, OK, w836xx_memw_enable_2e}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, NULL, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", 0, OK, w83627thf_gpio44_raise_4e}, - {0x10DE, 0x0270, 0x1462, 0x7207, 0x10DE, 0x0264, 0x1462, 0x7207, NULL, NULL, NULL, "MSI", "MS-7207 (K8N GM2-L)", 0, NT, nvidia_mcp_gpio2_raise}, + {0x10DE, 0x0270, 0x1462, 0x7207, 0x10DE, 0x0264, 0x1462, 0x7207, NULL, NULL, NULL, "MSI", "MS-7207 (K8NGM2-L)", 0, NT, nvidia_mcp_gpio2_raise}, {0x1011, 0x0019, 0xaa55, 0xaa55, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, "Nokia", "IP530", 0, OK, fdc37b787_gpio50_raise_3f0}, {0x8086, 0x24d3, 0x144d, 0xb025, 0x8086, 0x1050, 0x144d, 0xb025, NULL, NULL, NULL, "Samsung", "Polaris 32", 0, OK, intel_ich_gpio21_raise}, {0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, NULL, "shuttle", "ak31", "Shuttle", "AK31", 0, OK, w836xx_memw_enable_2e}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Sun Aug 15 16:36:18 2010 (r1140) +++ trunk/print.c Sun Aug 15 17:26:30 2010 (r1141) @@ -278,12 +278,14 @@ const struct board_info boards_known[] = { #if defined(__i386__) || defined(__x86_64__) B("A-Trend", "ATC-6220", 1, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL), + B("abit", "AN-M2", 1, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), B("abit", "AX8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), B("abit", "Fatal1ty F-I90HD", 1, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), B("abit", "IC7", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), B("abit", "IP35", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), B("abit", "IP35 Pro", 1, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), B("abit", "IS-10", 0, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), @@ -312,7 +314,10 @@ B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/product.aspx?P_ID=SEJOOYqfuQPitx2H", NULL), B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ", NULL), B("ASUS", "A7V8X-X", 1, "http://www.asus.com/product.aspx?P_ID=YcXfRrWHZ9RKoVmw", NULL), + B("ASUS", "A8Jm", 1, "http://www.asus.com/product.aspx?P_ID=VztICtOgiU6drx4m", NULL), + B("ASUS", "A8N", 1, NULL, NULL), /* TODO: This should probably be A8N-SLI Deluxe, see http://www.coreboot.org/pipermail/flashrom/2009-November/000878.html. */ B("ASUS", "A8N-E", 1, "http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz", NULL), + B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), B("ASUS", "A8N-SLI", 1, "http://www.asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK", NULL), B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/product.aspx?P_ID=nbulqxniNmzf0mH1", NULL), B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=JBqqlpj4cspbSa3s", NULL), @@ -347,9 +352,11 @@ B("ASUS", "P3B-F", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", NULL), B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), + B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), + B("ASUS", "P4S800-MX", 1, "http://www.asus.com/product.aspx?P_ID=Bb57zoJhmO1Qkcrh", NULL), B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa", NULL), @@ -408,14 +415,17 @@ B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL), B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL), B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), - B("HP", "DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), + B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), + B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL), - B("HP", "Vectra VL400 PC", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), - B("HP", "Vectra VL420 SFF PC", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), + B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), + B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), B("HP", "xw9400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted." ), + B("IBASE", "MB899", 1, "http://www.ibase-i.com.tw/2009/mb899.html", NULL), B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), B("Intel", "EP80759", 1, NULL, NULL), + B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html."), B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J7F4…", NULL), B("Kontron", "986LCD-M", 1, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), @@ -425,6 +435,7 @@ B("MSI", "MS-6178", 0, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=343", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot."), B("MSI", "MS-6330 (K7T Turbo)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=327", NULL), B("MSI", "MS-6570 (K7N2)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=519", NULL), + B("MSI", "MS-6577 (Xenon)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), B("MSI", "MS-6590 (KT4 Ultra)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=502", NULL), B("MSI", "MS-6702E (K8T Neo2-F)",1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=588", NULL), B("MSI", "MS-6712 (KT4V)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=505", NULL), @@ -435,6 +446,7 @@ B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=170", NULL), B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), + B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=224", NULL), B("MSI", "MS-7236 (945PL Neo3)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1173", NULL), B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=260", NULL), B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1082", NULL),

1 0

[PATCH] Board enable for ASRock 775i65G
by Joshua Roys 15 Aug '10

15 Aug '10

Hello, Patch is attached. Josh

3 3

[PATCH] Mark ASUS A8N-LA (Nagami-2L) as tested
by Sean Nelson 15 Aug '10

15 Aug '10

Mark the ASUS A8N-LA as tested; change dmi string match to NAGAMI2L, and make a note that the enable might be suitable for other Nagami boards. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 1

[commit] r1140 - trunk
by repository service 15 Aug '10

15 Aug '10

Author: uwe Date: Sun Aug 15 16:36:18 2010 New Revision: 1140 URL: http://flashrom.org/trac/coreboot/changeset/1140 Log: Mark the board-enable for ASUS A8N-LA (HP OEM "Nagami-GL8E") as tested. Change the DMI string to only match this exact board (DMI "NAGAMI2L") as only this one is tested. Similar HP OEM boards might also work using this board-enable but that's not sure and not tested. Two of those boards have DMI strings "NAGAMI" and "NAGAMI2". Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Aug 15 12:21:29 2010 (r1139) +++ trunk/board_enable.c Sun Aug 15 16:36:18 2010 (r1140) @@ -848,7 +848,7 @@ /* * Suited for: - * - ASUS A8N-LA: NVIDIA MCP51 + * - ASUS A8N-LA (HP OEM "Nagami-GL8E"): NVIDIA MCP51 * - ASUS M2NBP-VM CSM: NVIDIA MCP51 */ static int nvidia_mcp_gpio0_raise(void) @@ -1759,7 +1759,7 @@ {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, {0x8086, 0x27A0, 0x1043, 0x1287, 0x8086, 0x27DF, 0x1043, 0x1287, "^A8J", NULL, NULL, "ASUS", "A8JM", 0, NT, intel_ich_gpio34_raise}, - {0x10DE, 0x0260, 0x103c, 0x2a3e, 0x10DE, 0x0264, 0x103c, 0x2a3e, "NAGAMI", NULL, NULL, "ASUS", "A8N-LA", 0, NT, nvidia_mcp_gpio0_raise}, + {0x10DE, 0x0260, 0x103c, 0x2a3e, 0x10DE, 0x0264, 0x103c, 0x2a3e, "NAGAMI2L", NULL, NULL, "ASUS", "A8N-LA (Nagami-GL8E)", 0, OK, nvidia_mcp_gpio0_raise}, {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, NULL, NULL, NULL, "ASUS", "A8N", 0, NT, board_shuttle_fn25}, {0x10de, 0x0264, 0x1043, 0x81bc, 0x10de, 0x02f0, 0x1043, 0x81cd, NULL, NULL, NULL, "ASUS", "A8N-VM CSM", 0, NT, w83627ehf_gpio24_raise_2e}, {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise},

1 0

← Newer
1
...
9
10
11
12
13
14
15
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom August 2010