Change in flashrom[master]: tests: Do not run a test if its driver is not built

[Anastasia Klimchuk (Code Review)]

Attention is currently required from: Edward O'Callaghan, Anastasia Klimchuk.
Hello build bot (Jenkins), Nico Huber, Edward O'Callaghan, Angel Pons,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/flashrom/+/55295

to look at the new patch set (#5).

Change subject: tests: Do not run a test if its driver is not built
......................................................................

tests: Do not run a test if its driver is not built

For all tests that exist as of today, drivers are built by default,
however config options can be disabled and in that case test should
not be run.

Technically, this is done by skipping the test.

BUG=b:181803212
TEST=1) Tested by adding into tests/meson.build
-DCONFIG_xxx=0
4 times (for every driver with test), and then running ninja test
Result: corresponding test is skipped, all other tests are passed

2) Running ninja test with default config settings (everything is
enabled, no overriding in test meson).
Result: all tests are passed.

3) Replacing one of config options in the patch with CONFIG_JLINK_SPI
which is disabled by default.
Result: corresponding test is skipped.

Change-Id: Ic1c48e41f658045a608f46636071f478ba646f77
Signed-off-by: Anastasia Klimchuk 
---
M tests/init_shutdown.c
1 file changed, 16 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/95/55295/5