Change in flashrom[staging]: Fix ID of ST M25P05

[Nico Huber (Code Review)]

Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/21920 )

Change subject: Fix ID of ST M25P05
......................................................................

Fix ID of ST M25P05

The (old) ST (now Micron) M25P05 does only support RES for identification.
Unfortunately, the vendor datasheet states the same ID as for the M25P10
(0x10) and thus flashrom has treated these two as evil twins in the past.
However, real hardware confirmed that the real ID of this chip is 0x05.

Change-Id: Idc75f8cb98e7ef0c47c4527cedcc4da3723bd779
Signed-off-by: Serge Vasilugin 
Tested-by: Serge Vasilugin 
Reviewed-on: https://review.coreboot.org/21920
Reviewed-by: Nico Huber 
Tested-by: build bot (Jenkins) 
---
M flashchips.h
1 file changed, 2 insertions(+), 2 deletions(-)

Approvals:
  Nico Huber: Looks good to me, approved
  build bot (Jenkins): Verified

diff --git a/flashchips.h b/flashchips.h
index bff0c98..62eb9a5 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -749,9 +749,9 @@
  */
 #define ST_ID			0x20	/* ST / SGS/Thomson / Numonyx (later acquired by Micron) */
 #define ST_M25P05A		0x2010
-#define ST_M25P05_RES		0x10	/* Same code as M25P10. */
+#define ST_M25P05_RES		0x05
 #define ST_M25P10A		0x2011
-#define ST_M25P10_RES		0x10	/* Same code as M25P05. */
+#define ST_M25P10_RES		0x10
 #define ST_M25P20		0x2012
 #define ST_M25P20_RES		0x11
 #define ST_M25P40		0x2013