Change in ...flashrom[master]: linux_spi: Hardcode default spispeed of 2MHz

[Nico Huber (Code Review)]

Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/c/flashrom/+/30368 )

Change subject: linux_spi: Hardcode default spispeed of 2MHz
......................................................................

linux_spi: Hardcode default spispeed of 2MHz

Leaving the `linux_spi` driver's unknown default is almost never what we
want and resulted in many support requests since Raspbian switched to a
default that is too high for most applications.

Change-Id: I9361b7c1a1ab8900a619b06e1dae14cd87eb56c2
Signed-off-by: Nico Huber 
Reviewed-on: https://review.coreboot.org/c/30368
Tested-by: build bot (Jenkins) 
Reviewed-by: Arthur Heymans 
---
M linux_spi.c
1 file changed, 13 insertions(+), 10 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Arthur Heymans: Looks good to me, approved

diff --git a/linux_spi.c b/linux_spi.c
index 3e60492..711ab4a 100644
--- a/linux_spi.c
+++ b/linux_spi.c
@@ -18,6 +18,8 @@
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
 #include <fcntl.h>
 #include <errno.h>
 #include <ctype.h>
@@ -66,7 +68,7 @@
 int linux_spi_init(void)
 {
    char *p, *endp, *dev;
-	uint32_t speed_hz = 0;
+	uint32_t speed_hz = 2 * 1000 * 1000;
    /* FIXME: make the following configurable by CLI options. */
    /* SPI mode 0 (beware this also includes: MSB first, CS active low and others */
    const uint8_t mode = SPI_MODE_0;
@@ -75,11 +77,15 @@
    p = extract_programmer_param("spispeed");
    if (p && strlen(p)) {
    	speed_hz = (uint32_t)strtoul(p, &endp, 10) * 1000;
-		if (p == endp) {
+		if (p == endp || speed_hz == 0) {
    		msg_perr("%s: invalid clock: %s kHz\n", __func__, p);
    		free(p);
    		return 1;
    	}
+	} else {
+		msg_pinfo("Using default %"PRIu32
+			  "kHz clock. Use 'spispeed' parameter to override.\n",
+			  speed_hz / 1000);
    }
    free(p);

@@ -104,15 +110,12 @@
    	return 1;
    /* We rely on the shutdown function for cleanup from here on. */

-	if (speed_hz > 0) {
-		if (ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed_hz) == -1) {
-			msg_perr("%s: failed to set speed to %d Hz: %s\n",
-				 __func__, speed_hz, strerror(errno));
-			return 1;
-		}
-
-		msg_pdbg("Using %d kHz clock\n", speed_hz/1000);
+	if (ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed_hz) == -1) {
+		msg_perr("%s: failed to set speed to %"PRIu32"Hz: %s\n",
+			 __func__, speed_hz, strerror(errno));
+		return 1;
    }
+	msg_pdbg("Using %"PRIu32"kHz clock\n", speed_hz / 1000);

if (ioctl(fd, SPI_IOC_WR_MODE, &mode) == -1) {
    	msg_perr("%s: failed to set SPI mode to 0x%02x: %s\n",