Change in flashrom[master]: digilent_spi: add a driver for the iCEblink40 development board

[Lubomir Rintel (Code Review)]

Hello Paul Menzel, build bot (Jenkins), Nico Huber,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/23338

to look at the new patch set (#6).

Change subject: digilent_spi: add a driver for the iCEblink40 development board
......................................................................

digilent_spi: add a driver for the iCEblink40 development board

This is driver that supports the Lattice iCE40 evaluation kits. On the
board is a SPI flash memory chip labeled ST 25P10VP.

Tested to work read/write/erase with "-p digilent_spi -c M25P10" or
with a patch that resets the part beforehands (in which case it gets
detected as a M25P10-A and is way faster due to paged writes).

Change-Id: I7ffcd9a2db4395816f0e8b6ce6c3b0d8e930c9e6
Signed-off-by: Lubomir Rintel 
---
M Makefile
A digilent_spi.c
M flashrom.8.tmpl
M flashrom.c
M programmer.h
5 files changed, 508 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/38/23338/6