Change in flashrom[master]: Makefile: replace RAW_ACCESS with RAW_MEM_ACCESS X86_MSR X86_PORT_IO

[Nico Huber (Code Review)]

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/60325 )

Change subject: Makefile: replace RAW_ACCESS with RAW_MEM_ACCESS X86_MSR X86_PORT_IO
......................................................................

Makefile: replace RAW_ACCESS with RAW_MEM_ACCESS X86_MSR X86_PORT_IO

Let programmer only depend on the kind of hardware access method they
really need. Libpci no longer depends on all hardware access types since
each programmer handles this individually.

Change-Id: I5bdafaa3c5023ad6c4a695493eeddf11bc148085
Signed-off-by: Thomas Heijligen 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/60325
Tested-by: build bot (Jenkins) 
Reviewed-by: Nico Huber 
---
M Makefile
M meson.build
2 files changed, 21 insertions(+), 22 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Nico Huber: Looks good to me, approved

diff --git a/Makefile b/Makefile
index 6e2e33f..3325aa6 100644
--- a/Makefile
+++ b/Makefile
@@ -612,7 +612,6 @@
 ifeq ($(CONFIG_RAYER_SPI), yes)
 FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1'
 PROGRAMMER_OBJS += rayer_spi.o
-NEED_RAW_ACCESS += CONFIG_RAYER_SPI
 endif

ifeq ($(CONFIG_RAIDEN_DEBUG_SPI), yes)
@@ -814,10 +813,6 @@
 NEED_LIBPCI := $(call filter_deps,$(DEPENDS_ON_LIBPCI))
 ifneq ($(NEED_LIBPCI), )
 CHECK_LIBPCI = yes
-# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually.
-# libpci may need raw memory, MSR or PCI port I/O on some platforms.
-# Individual drivers might have the same needs as well.
-NEED_RAW_ACCESS += $(NEED_LIBPCI)
 FEATURE_CFLAGS += -D'NEED_PCI=1'
 FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'")

@@ -830,27 +825,32 @@
 endif
 endif

-ifneq ($(NEED_RAW_ACCESS), )
-# Raw memory, MSR or PCI port I/O access.
-FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1'
-PROGRAMMER_OBJS += hwaccess_physmap.o
+USE_X86_MSR := $(if $(call filter_deps,$(DEPENDS_ON_X86_MSR)),yes,no)
+ifeq ($(USE_X86_MSR), yes)
+PROGRAMMER_OBJS += hwaccess_x86_msr.o
+endif

-ifeq ($(ARCH), x86)
+USE_X86_PORT_IO := $(if $(call filter_deps,$(DEPENDS_ON_X86_PORT_IO)),yes,no)
+ifeq ($(USE_X86_PORT_IO), yes)
 FEATURE_CFLAGS += -D'__FLASHROM_HAVE_OUTB__=1'
-PROGRAMMER_OBJS += hwaccess_x86_io.o  hwaccess_x86_msr.o
-
-ifeq ($(TARGET_OS), NetBSD)
-PCILIBS += -l$(shell uname -p)
-endif
-ifeq ($(TARGET_OS), OpenBSD)
-PCILIBS += -l$(shell uname -m)
-endif
+PROGRAMMER_OBJS += hwaccess_x86_io.o
 endif

-ifeq ($(TARGET_OS), Darwin)
-# DirectHW framework can be found in the DirectHW library.
-PCILIBS += -framework IOKit -framework DirectHW
+USE_RAW_MEM_ACCESS := $(if $(call filter_deps,$(DEPENDS_ON_RAW_MEM_ACCESS)),yes,no)
+ifeq ($(USE_RAW_MEM_ACCESS), yes)
+PROGRAMMER_OBJS += hwaccess_physmap.o
 endif
+
+ifeq (Darwin yes, $(TARGET_OS) $(filter $(USE_X86_MSR) $(USE_X86_PORT_IO) $(USE_RAW_MEM_ACCESS), yes))
+override LDFLAGS += -framework IOKit -framework DirectHW
+endif
+
+ifeq (NetBSD yes, $(TARGET_OS) $(filter $(USE_X86_MSR) $(USE_X86_PORT_IO), yes))
+override LDFLAGS += -l$(shell uname -p)
+endif
+
+ifeq (OpenBSD yes, $(TARGET_OS) $(filter $(USE_X86_MSR) $(USE_X86_PORT_IO), yes))
+override LDFLAGS += -l$(shell uname -m)
 endif

USE_LIBUSB1 := $(if $(call filter_deps,$(DEPENDS_ON_LIBUSB1)),yes,no)
diff --git a/meson.build b/meson.build
index 403a33e..4c33bf5 100644
--- a/meson.build
+++ b/meson.build
@@ -349,7 +349,6 @@
   srcs += 'hwaccess_x86_io.c'
   srcs += 'hwaccess_x86_msr.c'
   srcs += 'hwaccess_physmap.c'
-  cargs += '-DNEED_RAW_ACCESS=1'
   cargs += '-D__FLASHROM_HAVE_OUTB__=1'
 endif

5 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.