Change in flashrom[master]: lspcon_i2c_spi.c: Rename PAGE_SIZE macro

[Angel Pons (Code Review)]

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/52469 )

Change subject: lspcon_i2c_spi.c: Rename PAGE_SIZE macro
......................................................................

lspcon_i2c_spi.c: Rename PAGE_SIZE macro

This fixes building with musl libc on alpine:i386-v3.7.

Change-Id: Ibd478f3fcd6b6803098035dbdc47f72f6ab3fa6b
Signed-off-by: Angel Pons 
---
M lspcon_i2c_spi.c
1 file changed, 8 insertions(+), 8 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/69/52469/1

diff --git a/lspcon_i2c_spi.c b/lspcon_i2c_spi.c
index 7b9f1c0..7599db6 100644
--- a/lspcon_i2c_spi.c
+++ b/lspcon_i2c_spi.c
@@ -27,7 +27,7 @@

#define REGISTER_ADDRESS	(0x94 >> 1)
 #define PAGE_ADDRESS		(0x9e >> 1)
-#define PAGE_SIZE		256
+#define LSPCON_PAGE_SIZE	256
 #define MAX_SPI_WAIT_RETRIES	1000

#define CLT2_SPI		0x82
@@ -330,7 +330,7 @@
 static int lspcon_i2c_spi_map_page(int fd, unsigned int offset)
 {
    int ret = 0;
-	/* Page number byte, need to / PAGE_SIZE. */
+	/* Page number byte, need to / LSPCON_PAGE_SIZE. */
    ret |= lspcon_i2c_spi_write_register(fd, ROMADDR_BYTE1, (offset >> 8) & 0xff);
    ret |= lspcon_i2c_spi_write_register(fd, ROMADDR_BYTE2, (offset >> 16));

@@ -349,9 +349,9 @@
    if (fd < 0)
    	return SPI_GENERIC_ERROR;

-	for (i = 0; i < len; i += PAGE_SIZE) {
+	for (i = 0; i < len; i += LSPCON_PAGE_SIZE) {
    	ret |= lspcon_i2c_spi_map_page(fd, start + i);
-		ret |= lspcon_i2c_spi_read_data(fd, PAGE_ADDRESS, buf + i, min(len - i, PAGE_SIZE));
+		ret |= lspcon_i2c_spi_read_data(fd, PAGE_ADDRESS, buf + i, min(len - i, LSPCON_PAGE_SIZE));
    }

return ret;
@@ -363,8 +363,8 @@
          * Using static buffer with maximum possible size,
          * extra byte is needed for prefixing zero at index 0.
          */
-	uint8_t write_buffer[PAGE_SIZE + 1] = { 0 };
-	if (len > PAGE_SIZE)
+	uint8_t write_buffer[LSPCON_PAGE_SIZE + 1] = { 0 };
+	if (len > LSPCON_PAGE_SIZE)
    	return SPI_GENERIC_ERROR;

/* First byte represents the writing offset and should always be zero. */
@@ -389,9 +389,9 @@
    ret |= lspcon_i2c_spi_enable_hw_write(fd);
    ret |= lspcon_i2c_clt2_spi_reset(fd);

-	for (unsigned int i = 0; i < len; i += PAGE_SIZE) {
+	for (unsigned int i = 0; i < len; i += LSPCON_PAGE_SIZE) {
    	ret |= lspcon_i2c_spi_map_page(fd, start + i);
-		ret |= lspcon_i2c_spi_write_page(fd, buf + i, min(len - i, PAGE_SIZE));
+		ret |= lspcon_i2c_spi_write_page(fd, buf + i, min(len - i, LSPCON_PAGE_SIZE));
    }

ret |= lspcon_i2c_spi_enable_write_protection(fd);