[M] Change in flashrom[1.2.x]: test build script

[Felix Singer (Code Review)]

Felix Singer has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/68065 )

Change subject: test build script
......................................................................

test build script

Signed-off-by: Felix Singer 
Change-Id: I53e688a2992faab9344adeb77bc312889984d8ed
---
M test_build.sh
1 file changed, 79 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/65/68065/1

diff --git a/test_build.sh b/test_build.sh
index 3ab5319..aa93682 100755
--- a/test_build.sh
+++ b/test_build.sh
@@ -1,4 +1,71 @@
-#!/bin/sh
+#!/usr/bin/env sh
 set -e

-make CONFIG_EVERYTHING=yes WARNERROR=yes
+# This script will only work on Linux with all dependencies installed.
+
+is_scan_build_env=0
+
+make_programmer_opts="INTERNAL SERPROG RAYER_SPI PONY_SPI NIC3COM		\
+		      GFXNVIDIA SATASII ATAHPT ATAVIA ATAPROMISE FT2232_SPI USBBLASTER_SPI MSTARDDC_SPI	\
+		      PICKIT2_SPI STLINKV3_SPI DUMMY 	\
+		      DRKAISER NICREALTEK NICNATSEMI NICINTEL NICINTEL_SPI NICINTEL_EEPROM OGP_SPI	\
+		      BUSPIRATE_SPI DEDIPROG DEVELOPERBOX_SPI SATAMV LINUX_MTD LINUX_SPI IT8212		\
+		      CH341A_SPI DIGILENT_SPI JLINK_SPI"
+
+meson_programmer_opts="all auto group_ftdi group_i2c group_jlink group_pci group_serial group_usb		\
+			atahpt atapromise atavia buspirate_spi ch341a_spi dediprog developerbox_spi	\
+			digilent_spi drkaiser dummy ft2232_spi gfxnvidia internal it8212		\
+			jlink_spi linux_mtd linux_spi parade_lspcon mediatek_i2c_spi mstarddc_spi	\
+			nic3com nicintel nicintel_eeprom nicintel_spi nicnatsemi nicrealtek		\
+			ogp_spi pickit2_spi pony_spi raiden_debug_spi rayer_spi realtek_mst_i2c_spi	\
+			satamv satasii serprog stlinkv3_spi usbblaster_spi"
+
+
+if [ "$(basename "${CC}")" = "ccc-analyzer" ] || [ -n "${COVERITY_OUTPUT}" ]; then
+	is_scan_build_env=1
+fi
+
+
+build_make () {
+	make clean
+	make -j $(nproc) CONFIG_EVERYTHING=yes
+
+	# In case of clang analyzer we don't want to run it on
+	# each programmer individually. Thus, just return here.
+	if [ ${is_scan_build_env} -eq 1 ]; then
+		return
+	fi
+
+	for option in ${make_programmer_opts}; do
+		echo "Building ${option}"
+		make clean
+		make -j $(nproc) CONFIG_NOTHING=yes CONFIG_${option}=yes
+	done
+}
+
+
+build_meson () {
+	build_dir=out
+	meson_opts="-Dtests=enabled"
+	ninja_opts="-j $(nproc)"
+
+	rm -rf ${build_dir}
+
+	for programmer in ${meson_programmer_opts}; do
+		programmer_dir="${build_dir}/${programmer}"
+
+		# In case of clang analyzer we don't want to run it on
+		# each programmer individually. Thus, just return here.
+		if [ ${is_scan_build_env} -eq 1 ] && [ "${programmer}" != "all" ]; then
+			return
+		fi
+
+		meson ${programmer_dir} ${meson_opts} -Dprogrammer=${programmer}
+		ninja ${ninja_opts} -C ${programmer_dir}
+		ninja ${ninja_opts} -C ${programmer_dir} test
+	done
+}
+
+
+build_make
+#build_meson