Simon Buhrow has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/58971 )
Change subject: flashchips: Add W25Q64JV ......................................................................
flashchips: Add W25Q64JV
I have successfully tested it with FT2232H-programmer.
Change-Id: Ia9a32146b225eca66e9a6bfef45be5f2b24aef46 Signed-off-by: Simon Buhrow simon.buhrow@posteo.de --- M flashchips.c M flashchips.h 2 files changed, 41 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/71/58971/1
diff --git a/flashchips.c b/flashchips.c index 434c46d..b89c6be 100644 --- a/flashchips.c +++ b/flashchips.c @@ -17869,6 +17869,46 @@
{ .vendor = "Winbond", + .name = "W25Q64JV", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64JV, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* QPI enable 0x38*/ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", .name = "W25Q64.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, diff --git a/flashchips.h b/flashchips.h index e190dca..ba97719 100644 --- a/flashchips.h +++ b/flashchips.h @@ -976,6 +976,7 @@ #define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */ #define WINBOND_NEX_W25Q128_W 0x6018 /* W25Q128FW; W25Q128FV in QPI mode */ #define WINBOND_NEX_W25Q256_W 0x6019 /* W25Q256JW */ +#define WINBOND_NEX_W25Q64JV 0x7017 /* W25Q64JV */ #define WINBOND_NEX_W25Q128_V_M 0x7018 /* W25Q128JVSM */ #define WINBOND_NEX_W25Q256JV_M 0x7019 /* W25Q256JV_M (QE=0) */ #define WINBOND_NEX_W25Q32JW_M 0x8016 /* W25Q32JW...M */