Change in flashrom[master]: Remove white space before tab

[Elyes HAOUAS (Code Review)]

Elyes HAOUAS has uploaded this change for review. ( https://review.coreboot.org/26652

Change subject: Remove white space before tab
......................................................................

Remove white space before tab

Change-Id: I90f171924790ced74a62ca344fee8607607aa480
Signed-off-by: Elyes HAOUAS 
---
M board_enable.c
M dediprog.c
M flashchips.h
M it85spi.c
M pcidev.c
M pickit2_spi.c
M print.c
7 files changed, 10 insertions(+), 10 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/52/26652/1

diff --git a/board_enable.c b/board_enable.c
index a09a075..c3494bd 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -527,10 +527,10 @@

/* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM    */
    	/* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */
-		/* These bits are reserved on W83697HF/F/HG 		    */
-		/* Shouldn't be needed though.			   	    */
+		/* These bits are reserved on W83697HF/F/HG		    */
+		/* Shouldn't be needed though.				    */

-		/* CR28 Bit3 must be set to 1 to enable flash access to     */
+		/* CR28 Bit3 must be set to 1 to enable flash access to	    */
    	/* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG.		    */
    	/* This bit is reserved on W83697HF/F/HG which default to 0 */
    		sio_mask(port, 0x28, 0x08, 0x08);
diff --git a/dediprog.c b/dediprog.c
index ef43e90..7fcadfb 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -121,7 +121,7 @@
 };

enum dediprog_writemode {
-	WRITE_MODE_PAGE_PGM 			= 1,
+	WRITE_MODE_PAGE_PGM			= 1,
    WRITE_MODE_PAGE_WRITE			= 2,
    WRITE_MODE_1B_AAI			= 3,
    WRITE_MODE_2B_AAI			= 4,
diff --git a/flashchips.h b/flashchips.h
index f00be3b..5c10b4f 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -146,7 +146,7 @@
 #define ATMEL_AT25F4096		0x64	/* Needs AT25F_RDID */
 #define ATMEL_AT25FS010		0x6601
 #define ATMEL_AT25FS040		0x6604
-#define ATMEL_AT25SF041 	0x8401
+#define ATMEL_AT25SF041		0x8401
 #define ATMEL_AT26DF041		0x4400
 #define ATMEL_AT26DF081		0x4500	/* guessed, no datasheet available */
 #define ATMEL_AT26DF081A	0x4501
diff --git a/it85spi.c b/it85spi.c
index f7bc8cb..e47cabb 100644
--- a/it85spi.c
+++ b/it85spi.c
@@ -53,8 +53,8 @@
  * IBF is set to 1 when the host CPU sends a command to the input buffer
  * of the EC. IBF is cleared to 0 once the command is read by the EC.
  */
-#define KB_IBF 			(1 << 1)  /* Input Buffer Full */
-#define KB_OBF 			(1 << 0)  /* Output Buffer Full */
+#define KB_IBF			(1 << 1)  /* Input Buffer Full */
+#define KB_OBF			(1 << 0)  /* Output Buffer Full */

/* IT8502 supports two access modes:
  *   LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode)
diff --git a/pcidev.c b/pcidev.c
index 3273341..8f9773b 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -293,7 +293,7 @@
    return 0;
 }

-#define register_undo_pci_write(a, b, c) 				\
+#define register_undo_pci_write(a, b, c)				\
 {									\
    struct undo_pci_write_data *undo_pci_write_data;		\
    undo_pci_write_data = malloc(sizeof(struct undo_pci_write_data)); \
diff --git a/pickit2_spi.c b/pickit2_spi.c
index 037c6dd..a7c90a5 100644
--- a/pickit2_spi.c
+++ b/pickit2_spi.c
@@ -449,7 +449,7 @@
    (void)usb_find_devices();
    const uint16_t vid = devs_pickit2_spi[0].vendor_id;
    const uint16_t pid = devs_pickit2_spi[0].device_id;
- 	struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice);
+	struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice);
    if (dev == NULL) {
    	msg_perr("Could not find a PICkit2 on USB!\n");
    	return 1;
diff --git a/print.c b/print.c
index 114181e..30f06c8 100644
--- a/print.c
+++ b/print.c
@@ -974,7 +974,7 @@
    B("MSI",	"MS-7312 (K9MM-V)",	OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
    B("MSI",	"MS-7336",		OK, NULL, "Some non-essential DMI data (e.g. serial numbers) is overwritten when using flashrom. This is an OEM board used by HP (e.g. dx2300 Microtower)."),
    B("MSI",	"MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
-	B("MSI",	"MS-7357 (G33M)", 	OK, "http://www.msi.com/product/mb/G33M.html", NULL),
+	B("MSI",	"MS-7357 (G33M)",	OK, "http://www.msi.com/product/mb/G33M.html", NULL),
    B("MSI",	"MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
    B("MSI",	"MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
    B("MSI",	"MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),