Change in flashrom[master]: cli_classic.c: reorder writeprotect operation processing

[Daniel Campello (Code Review)]

Daniel Campello has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/52530 )

Change subject: cli_classic.c: reorder writeprotect operation processing
......................................................................

cli_classic.c: reorder writeprotect operation processing

Make sure that layout is set before. Also as the comment instructs make
sure that set_rw_range happens before set_wp_enable.

Signed-off-by: Daniel Campello 
Change-Id: I7480d3f947aaaf30093d056226fe0c402763efdc
---
M cli_classic.c
1 file changed, 61 insertions(+), 61 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/30/52530/1

diff --git a/cli_classic.c b/cli_classic.c
index 0557b80..78ae76f 100644
--- a/cli_classic.c
+++ b/cli_classic.c
@@ -770,66 +770,6 @@
    	goto out_shutdown;
    }

-	if (wp_status) {
-		if (fill_flash->chip->wp && fill_flash->chip->wp->wp_status) {
-			ret |= fill_flash->chip->wp->wp_status(fill_flash);
-		} else {
-			msg_gerr("Error: write protect is not supported on this flash chip.\n");
-			ret = 1;
-		}
-		goto out_shutdown;
-	}
-
-	/* Note: set_wp_disable should be done before setting the range */
-	if (set_wp_disable) {
-		if (fill_flash->chip->wp && fill_flash->chip->wp->disable) {
-			ret |= fill_flash->chip->wp->disable(fill_flash);
-		} else {
-			msg_gerr("Error: write protect is not supported on this flash chip.\n");
-			ret = 1;
-			goto out_shutdown;
-		}
-	}
-
-	if (!ret && set_wp_enable) {
-		enum wp_mode wp_mode;
-
-		if (wp_mode_opt)
-			wp_mode = get_wp_mode(wp_mode_opt);
-		else
-			wp_mode = WP_MODE_HARDWARE;	/* default */
-
-		if (wp_mode == WP_MODE_UNKNOWN) {
-			msg_gerr("Error: Invalid WP mode: "%s"\n", wp_mode_opt);
-			ret = 1;
-			goto out_shutdown;
-		}
-
-		if (fill_flash->chip->wp && fill_flash->chip->wp->enable) {
-			ret |= fill_flash->chip->wp->enable(fill_flash, wp_mode);
-		} else {
-			msg_gerr("Error: write protect is not supported on this flash chip.\n");
-			ret = 1;
-			goto out_shutdown;
-		}
-	}
-
-	if (wp_list) {
-		msg_ginfo("Valid write protection ranges:\n");
-		if (fill_flash->chip->wp && fill_flash->chip->wp->list_ranges) {
-			ret |= fill_flash->chip->wp->list_ranges(fill_flash);
-		} else {
-			msg_gerr("Error: write protect is not supported on this flash chip.\n");
-			ret = 1;
-		}
-		goto out_shutdown;
-	}
-
-	/* Note: set_wp_range must happen before set_wp_enable */
-	if (set_wp_range) {
-		ret |= fill_flash->chip->wp->set_range(fill_flash, wp_start, wp_len);
-	}
-
    if (layoutfile) {
    	layout = get_global_layout();
    } else if (ifd && (flashrom_layout_read_from_ifd(&layout, fill_flash, NULL, 0) ||
@@ -869,8 +809,68 @@
    	ret = 1;
    	goto out_shutdown;
    }
-
    flashrom_layout_set(fill_flash, layout);
+
+	if (wp_status) {
+		if (fill_flash->chip->wp && fill_flash->chip->wp->wp_status) {
+			ret |= fill_flash->chip->wp->wp_status(fill_flash);
+		} else {
+			msg_gerr("Error: write protect is not supported on this flash chip.\n");
+			ret = 1;
+		}
+		goto out_shutdown;
+	}
+
+	/* Note: set_wp_disable should be done before setting the range */
+	if (set_wp_disable) {
+		if (fill_flash->chip->wp && fill_flash->chip->wp->disable) {
+			ret |= fill_flash->chip->wp->disable(fill_flash);
+		} else {
+			msg_gerr("Error: write protect is not supported on this flash chip.\n");
+			ret = 1;
+			goto out_shutdown;
+		}
+	}
+
+	/* Note: set_wp_range must happen before set_wp_enable */
+	if (set_wp_range) {
+		ret |= fill_flash->chip->wp->set_range(fill_flash, wp_start, wp_len);
+	}
+
+	if (!ret && set_wp_enable) {
+		enum wp_mode wp_mode;
+
+		if (wp_mode_opt)
+			wp_mode = get_wp_mode(wp_mode_opt);
+		else
+			wp_mode = WP_MODE_HARDWARE;	/* default */
+
+		if (wp_mode == WP_MODE_UNKNOWN) {
+			msg_gerr("Error: Invalid WP mode: "%s"\n", wp_mode_opt);
+			ret = 1;
+			goto out_shutdown;
+		}
+
+		if (fill_flash->chip->wp && fill_flash->chip->wp->enable) {
+			ret |= fill_flash->chip->wp->enable(fill_flash, wp_mode);
+		} else {
+			msg_gerr("Error: write protect is not supported on this flash chip.\n");
+			ret = 1;
+			goto out_shutdown;
+		}
+	}
+
+	if (wp_list) {
+		msg_ginfo("Valid write protection ranges:\n");
+		if (fill_flash->chip->wp && fill_flash->chip->wp->list_ranges) {
+			ret |= fill_flash->chip->wp->list_ranges(fill_flash);
+		} else {
+			msg_gerr("Error: write protect is not supported on this flash chip.\n");
+			ret = 1;
+		}
+		goto out_shutdown;
+	}
+
    flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force);
 #if CONFIG_INTERNAL == 1
    flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE_BOARDMISMATCH, !!force_boardmismatch);