Change in flashrom[master]: flashchips: Mark Spansion S25FL128P......0 as tested

[Nico Huber (Code Review)]

Nico Huber has posted comments on this change. ( https://review.coreboot.org/28866 )

Change subject: flashchips: Mark Spansion S25FL128P......0 as tested
......................................................................

Patch Set 1: Code-Review+2

(1 comment)

Please clarify the commit message. If it was a single chip, just drop
the sentence about the ...1 entry.

https://review.coreboot.org/#/c/28866/1//COMMIT_MSG
Commit Message:

https://review.coreboot.org/#/c/28866/1//COMMIT_MSG@9
PS1, Line 9: The S25FL128P......1 gives errors while
           : erasing, but I have not tested further.
It can only be either of them. If you select the wrong chip
model, failure is expected. And the ...1 is just the wrong
entry. According to the datasheet the ...1 would be marked
FL128PIFL.

Or were you talking about another chip?

Also just noted, the numbers are 00 and 01 so the names in
flashrom should be S25FL128P.....00 and S25FL128P.....01.