[S] Change in flashrom[main]: doc: Add current numbers of supported devices to the intro page

[Anastasia Klimchuk (Code Review)]

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/83130?usp=email )

Change subject: doc: Add current numbers of supported devices to the intro page
......................................................................

doc: Add current numbers of supported devices to the intro page

Current numbers are taken from the output of `flashrom -L` command.

Intro page still has a room for improvement, but as a first step the
numbers need to be updated. In future, maybe there is a way to update
the numbers less manually.

Change-Id: I7531521955dcf01348ed2ba9c54316b32b9cd925
Signed-off-by: Anastasia Klimchuk 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/83130
Reviewed-by: Peter Marheine 
Tested-by: build bot (Jenkins) 
---
M doc/intro.rst
1 file changed, 12 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Peter Marheine: Looks good to me, approved

diff --git a/doc/intro.rst b/doc/intro.rst
index b1fe99a..b9a2c97 100644
--- a/doc/intro.rst
+++ b/doc/intro.rst
@@ -2,20 +2,30 @@
 chips. It is designed to flash BIOS/EFI/coreboot/firmware/optionROM images on mainboards,
 network/graphics/storage controller cards, and various other programmer devices.

-* Supports more than 476 flash chips, 291 chipsets, 500 mainboards, 79 PCI devices,
-  17 USB devices and various parallel/serial port-based programmers.
+* Supports more than 627 flash chips, 407 chipsets, 539 mainboards, 94 PCI devices,
+  30 USB devices and various parallel/serial port-based programmers.
+  For more information, see the pages under :doc:`/supported_hw/index`.
+
 * Supports parallel, LPC, FWH and SPI flash interfaces and various chip packages (DIP32,
   PLCC32, DIP8, SO8/SOIC8, TSOP32, TSOP40, TSOP48, BGA and more).
+
 * No physical access needed, root access is sufficient (not needed for some programmers).
+
 * No bootable floppy disk, bootable CD-ROM or other media needed.
+
 * No keyboard or monitor needed. Simply reflash remotely via SSH.
+
 * No instant reboot needed. Reflash your chip in a running system, verify it, be happy.
   The new firmware will be present next time you boot.
+
 * Crossflashing and hotflashing is possible as long as the flash chips are electrically
   and logically compatible (same protocol). Great for recovery.
+
 * Scriptability. Reflash a whole pool of identical machines at the same time from the
   command line. It is recommended to check flashrom output and error codes.
+
 * Speed. flashrom is often much faster than most vendor flash tools.
+
 * Portability. Supports DOS, Linux, FreeBSD (including Debian/kFreeBSD), NetBSD, OpenBSD,
   DragonFlyBSD, anything Solaris-like, Mac OS X, and other Unix-like OSes as well as GNU Hurd.
   Partial Windows support is available (no internal programmer support at the moment, hence