[M] Change in flashrom[master]: sb600spi.c: Drop "Promontory" support

[Angel Pons (Code Review)]

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/69170 )

Change subject: sb600spi.c: Drop "Promontory" support
......................................................................

sb600spi.c: Drop "Promontory" support

The "Promontory" code is riddled with issues, some of them can result in
soft bricks. Moreover, Promontory doesn't have a SPI controller.

Drop support for "Promontory" in flashrom for now: it's holding back the
entire project and it's unlikely that it'll be fixed in a timely manner.

Change-Id: I1457946dce68321b496d9ffa40a0c5ab46455f72
Signed-off-by: Angel Pons 
---
M sb600spi.c
1 file changed, 16 insertions(+), 42 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/70/69170/1

diff --git a/sb600spi.c b/sb600spi.c
index 6020145..2e7be81 100644
--- a/sb600spi.c
+++ b/sb600spi.c
@@ -48,7 +48,6 @@
    CHIPSET_HUDSON234,
    CHIPSET_BOLTON,
    CHIPSET_YANGTZE,
-	CHIPSET_PROMONTORY,
 };

#define FIFO_SIZE_OLD		8
@@ -124,18 +123,6 @@
    	if (rev == 0x4a) {
    		msg_pdbg("Yangtze detected.\n");
    		return CHIPSET_YANGTZE;
-		/**
-		 * FCH chipsets called 'Promontory' are one's with the
-		 * so-called SPI100 ip core that uses memory mapping and
-		 * not a ring buffer for transactions. Typically this is
-		 * found on both Stoney Ridge and Zen platforms.
-		 *
-		 * The revisions I have found by searching various lspci
-		 * outputs are as follows: 0x4b, 0x59, 0x61 & 0x71.
-		 */
-		} else if (rev == 0x4b || rev == 0x51 || rev == 0x59 || rev == 0x61 || rev == 0x71) {
-			msg_pdbg("Promontory (rev 0x%02x) detected.\n", rev);
-			return CHIPSET_PROMONTORY;
    	} else {
    		msg_pwarn("FCH device found but SMBus revision 0x%02x does not match known values.\n"
    			  "Please report this to [e-mail] and include this log and\n"
@@ -572,18 +559,6 @@
    return amd_imc_shutdown(dev);
 }

-static int promontory_read_memmapped(struct flashctx *flash, uint8_t *buf,
-		unsigned int start, unsigned int len)
-{
-	struct sb600spi_data * data = (struct sb600spi_data *)flash->mst->spi.data;
-	if (!data->flash) {
-		map_flash(flash);
-		data->flash = flash; /* keep a copy of flashctx for unmap() on tear-down. */
-	}
-	mmio_readn((void *)(flash->virtual_memory + start), buf, len);
-	return 0;
-}
-
 static int sb600spi_shutdown(void *data)
 {
    struct sb600spi_data *sb600_data = data;
@@ -623,20 +598,6 @@
    .probe_opcode	= default_spi_probe_opcode,
 };

-static const struct spi_master spi_master_promontory = {
-	.max_data_read	= MAX_DATA_READ_UNLIMITED,
-	.max_data_write	= FIFO_SIZE_YANGTZE - 3,
-	.command	= spi100_spi_send_command,
-	.multicommand	= default_spi_send_multicommand,
-	.map_flash_region	= physmap,
-	.unmap_flash_region	= physunmap,
-	.read		= promontory_read_memmapped,
-	.write_256	= default_spi_write_256,
-	.write_aai	= default_spi_write_aai,
-	.shutdown	= sb600spi_shutdown,
-	.probe_opcode	= default_spi_probe_opcode,
-};
-
 int sb600_probe_spi(const struct programmer_cfg *cfg, struct pci_dev *dev)
 {
    struct pci_dev *smbus_dev;
@@ -740,7 +701,6 @@
    case CHIPSET_SB89XX:
    case CHIPSET_HUDSON234:
    case CHIPSET_YANGTZE:
-	case CHIPSET_PROMONTORY:
    	msg_pdbg(", SpiBusy=%i", (tmp >> 31) & 0x1);
    default: break;
    }
@@ -817,8 +777,6 @@
    	register_spi_master(&spi_master_sb600, data);
    else if (amd_gen == CHIPSET_YANGTZE)
    	register_spi_master(&spi_master_yangtze, data);
-	else
-		register_spi_master(&spi_master_promontory, data);

return 0;
 }