[S] Change in flashrom[master]: config: added configuration data for ST M95P16 16mbit SPI flash chip

[Simon Krix (Code Review)]

Simon Krix has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/75808?usp=email )

Change subject: config: added configuration data for ST M95P16 16mbit SPI flash chip
......................................................................

config: added configuration data for ST M95P16 16mbit SPI flash chip

Added ST M95P16 16mbit SPI flash chip to configurations list.
Datasheet: https://www.st.com/resource/en/datasheet/m95p16-i.pdf

With this config I am able to erase, program, and verify the chip's
contents using an FT232H interface.

Change-Id: I17a9ec18d695209aca93a0196af9b2bf90271f7b
Signed-off-by: Simon Krix 
---
M flashchips.c
M include/flashchips.h
2 files changed, 40 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/08/75808/1

diff --git a/flashchips.c b/flashchips.c
index ff80140..bc9975e 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -15924,6 +15924,45 @@
    },

{
+		.vendor		= "ST",
+		.name		= "M95P16",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= ST_ID,
+		.model_id	= ST_M95P16,
+		.total_size	= 2048,
+		.page_size	= 512,
+		.feature_bits	= FEATURE_WRSR_WREN,
+		.tested		= TEST_UNTESTED,
+		.probe		= PROBE_SPI_ST95,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {512, 4096} },
+				.block_erase = SPI_BLOCK_ERASE_DB,
+			},
+			{
+				.eraseblocks = { {4 * 1024, 512} },
+				.block_erase = SPI_BLOCK_ERASE_20,
+			},
+			{
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = SPI_BLOCK_ERASE_D8,
+			},
+			{
+				.eraseblocks = { {2 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_C7,
+			}
+
+		},
+		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP1_SRWD,
+		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP1_SRWD,
+		.write		= SPI_CHIP_WRITE256,
+		.read		= SPI_CHIP_READ,
+		.voltage	= {2500, 5500},
+	},
+
+	{
    	.vendor		= "Sanyo",
    	.name		= "LE25FU106B",
    	.bustype	= BUS_SPI,
diff --git a/include/flashchips.h b/include/flashchips.h
index dc4a059..e50fab0 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -897,6 +897,7 @@
 #define ST_M58WR064KT		0x8810

#define ST_M95M02		0x0012	/* ST M95XXX 2Mbit (256KiB) */
+#define ST_M95P16		0x0015	/* ST M95P16 16Mbit (4096KiB) */

#define ST_MT28GU01G___1	0x88B0
 #define ST_MT28GU01G___2	0x88B1