Attention is currently required from: Nico Huber. Hello build bot (Jenkins), Subrata Banik, Angel Pons,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/flashrom/+/62282
to look at the new patch set (#6).
Change subject: ichspi: Add Jasper Lake support ......................................................................
ichspi: Add Jasper Lake support
Additionally, utilize CSSO (CPU Soft Strap Offset) to uniquely detect the chipset when the CSSL (CPU Soft Strap Length) field default value (0x03) on Jasper Lake is the same as Elkhart Lake.
BUG=b:221175960 TEST=dedede with `flashrom -p internal --flash-size`. ``` $ flashrom -VVV -p internal --ifd -i fd -i bios -r /tmp/filename.rom <snip> Enabling hardware sequencing by default for 100+ series PCH. OK. No board enable found matching coreboot IDs vendor="Google", model="Magolor". The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Chip identified: GD25Q127C/GD25Q128C Hardware sequencing reports 1 attached SPI flash chip with a density of 16384 kB. There is only one partition containing the whole address space (0x000000 - 0xffffff). There are 4096 erase blocks with 4096 B each. Added layout entry 00000000 - 00ffffff named complete flash Found GigaDevice flash chip "GD25Q127C/GD25Q128C" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found GigaDevice flash chip "GD25Q127C/GD25Q128C" (16384 kB, Programmer-specific). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading Status register Block protection is disabled. Reading ich descriptor... Reading 4096 bytes starting at 0x000000. done. Assuming chipset 'Jasper Lake'. Added layout entry 00000000 - 00000fff named fd Added layout entry 00381000 - 00ffffff named bios Added layout entry 00001000 - 00380fff named me restore_power_management: Re-enabling power management. Using regions: "bios", "fd". Reading Status register Block protection is disabled. Reading flash... 0x381000-0xffffff:R Reading 13103104 bytes starting at 0x381000. 000000-0x0fff:R Reading 4096 bytes starting at 0x000000. done. restore_power_management: Re-enabling power management. SUCCESS Restoring PCI config space for 00:1f:5 reg 0xdc restore_power_management: Re-enabling power management. ```
Change-Id: Ib942d0b8942fe0a991b2af0b187414818485153d Signed-off-by: Edward O'Callaghan quasisec@google.com --- M chipset_enable.c M ich_descriptors.c M ichspi.c M programmer.h M util/ich_descriptors_tool/ich_descriptors_tool.c 5 files changed, 37 insertions(+), 4 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/82/62282/6