[M] Change in flashrom[main]: flashchips: Add support for MXIC MX25U25645G

[DZ (Code Review)]

DZ has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/82777?usp=email )

Change subject: flashchips: Add support for MXIC MX25U25645G
......................................................................

flashchips: Add support for MXIC MX25U25645G

The MX25U25645G has been tested by ch341a programmer : read, write,
erase and wp.

We have tested --wp-enable, --wp-disable, --wp-list and --wp-range
commands for write-protect feature.

MX25U25645G datasheet is available at the following URL:
https://www.mxic.com.tw/Lists/Datasheet/Attachments/8738/MX25U25645G,%201.8V...

Change-Id: I8641f36e1909274629690fc243be46281a21360d
Signed-off-by: DanielZhang 
---
M flashchips.c
M include/flashchips.h
2 files changed, 58 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/77/82777/1

diff --git a/flashchips.c b/flashchips.c
index a5d9ec2..473e775 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -11095,6 +11095,63 @@

{
    	.vendor		= "Macronix",
+		.name		= "MX25U25645G",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= MACRONIX_ID,
+		.model_id	= MACRONIX_MX25U25635F,
+		.total_size	= 32768,
+		.page_size	= 256,
+		/* OTP: 512B total; enter 0xB1, exit 0xC1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA | FEATURE_CFGR | FEATURE_SCUR,
+		.tested		= TEST_OK_PREWB,
+		.probe		= PROBE_SPI_RDID,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 8192} },
+				.block_erase = SPI_BLOCK_ERASE_21,
+			}, {
+				.eraseblocks = { {4 * 1024, 8192} },
+				.block_erase = SPI_BLOCK_ERASE_20,
+			}, {
+				.eraseblocks = { {32 * 1024, 1024} },
+				.block_erase = SPI_BLOCK_ERASE_5C,
+			}, {
+				.eraseblocks = { {32 * 1024, 1024} },
+				.block_erase = SPI_BLOCK_ERASE_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 512} },
+				.block_erase = SPI_BLOCK_ERASE_DC,
+			}, {
+				.eraseblocks = { {64 * 1024, 512} },
+				.block_erase = SPI_BLOCK_ERASE_D8,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_60,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = SPI_BLOCK_ERASE_C7,
+			}
+		},
+		/* TODO: security register */
+		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* bit6 is quad enable */
+		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
+		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
+		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
+		.voltage	= {1700, 2000},
+		.reg_bits	=
+		{
+			.srp    = {STATUS1, 7, RW},
+			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}},
+			.tb     = {CONFIG, 3, OTP},
+			.wps    = {SECURITY, 7, OTP}, /* This bit is set by WPSEL command */
+		},
+		.decode_range	= DECODE_RANGE_SPI25,
+	},
+
+	{
+		.vendor		= "Macronix",
    	.name		= "MX25U3235E/F",
    	.bustype	= BUS_SPI,
    	.manufacture_id	= MACRONIX_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index c264b04..0b276e9 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -534,7 +534,7 @@
 #define MACRONIX_MX25U3235E	0x2536	/* Same as MX25U6435F */
 #define MACRONIX_MX25U6435E	0x2537	/* Same as MX25U6435F */
 #define MACRONIX_MX25U12835E	0x2538	/* Same as MX25U12835F */
-#define MACRONIX_MX25U25635F	0x2539     /* Same as MX25U25643G */
+#define MACRONIX_MX25U25635F	0x2539     /* Same as MX25U25643G, MX25U25645G */
 #define MACRONIX_MX25U51245G	0x253a
 #define MACRONIX_MX25L3235D	0x5E16	/* MX25L3225D/MX25L3235D/MX25L3237D */
 #define MACRONIX_MX25L6495F	0x9517