Change in flashrom[staging]: 4BA: Support for 4-bytes addressing via Extended Address Register

[Nico Huber (Code Review)]

Nico Huber has uploaded a new patch set (#4) to the change originally created by David Hendricks. ( https://review.coreboot.org/20507 )

Change subject: 4BA: Support for 4-bytes addressing via Extended Address Register
......................................................................

4BA: Support for 4-bytes addressing via Extended Address Register

On some flash chips data with addresses more than 24-bit field
can address may be accessed by using Extended Address Register.
The register has 1-byte size and stores high byte of 32-bit address.
Then flash can be read from 3-bytes addressing mode with writing
high byte of address to this Register. By using this way we have
access to full memory of a chip. Some chips may support this method
only.

This patch provides code use Extended Address Register.

Patched files
-------------
chipdrivers.h
+ added functions declarations for spi4ba.c

flash.h
+ feature definitions added

flashrom.c
+ modified switch to 4-bytes addressing to support extended address register

spi4ba.h
+ definitions for 4-bytes addressing JEDEC commands
+ functions declarations from spi4ba.c (same as in chipdrivers.h, just to see)

spi4ba.c
+ functions for write Extended Address Register
+ functions for read/write/erase with Extended Address Register

Change-Id: I09a8aa11de2ca14901f142c67c83c4fa0def4e27
Signed-off-by: Boris Baykov , Russia, Jan 2014
[clg: ported from
      https://www.flashrom.org/pipermail/flashrom/2015-January/013200.html ]
Signed-off-by: Cédric Le Goater 
---
M chipdrivers.h
M flash.h
M flashrom.c
M spi4ba.c
M spi4ba.h
5 files changed, 361 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/07/20507/4