Anastasia Klimchuk has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/56101 )
Change subject: spi_master: Move shutdown function above spi_master struct ......................................................................
spi_master: Move shutdown function above spi_master struct
This patch prepares spi masters to use new API which allows to register shutdown function in spi_master struct. See also later patch in this chain, where spi masters are converted to new API.
BUG=b:185191942 TEST=builds and ninja test Comparing flashrom binary before and after the patch, make clean && make CONFIG_EVERYTHING=yes VERSION=none binary is the same
Change-Id: I50716686552b4ddcc6089d5afadb19ef59d9f9b4 Signed-off-by: Anastasia Klimchuk aklm@chromium.org --- M bitbang_spi.c M buspirate_spi.c M ch341a_spi.c M dediprog.c M digilent_spi.c M dummyflasher.c M it87spi.c M jlink_spi.c M lspcon_i2c_spi.c M pickit2_spi.c M realtek_mst_i2c_spi.c M sb600spi.c M serprog.c M wbsio_spi.c 14 files changed, 184 insertions(+), 188 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/01/56101/1
diff --git a/bitbang_spi.c b/bitbang_spi.c index 3d973c5..83c3501 100644 --- a/bitbang_spi.c +++ b/bitbang_spi.c @@ -131,6 +131,13 @@ return 0; }
+static int bitbang_spi_shutdown(void *data) +{ + /* FIXME: Run bitbang_spi_release_bus here or per command? */ + free(data); + return 0; +} + static const struct spi_master spi_master_bitbang = { .features = SPI_MASTER_4BA, .max_data_read = MAX_DATA_READ_UNLIMITED, @@ -142,13 +149,6 @@ .write_aai = default_spi_write_aai, };
-static int bitbang_spi_shutdown(void *data) -{ - /* FIXME: Run bitbang_spi_release_bus here or per command? */ - free(data); - return 0; -} - int register_spi_bitbang_master(const struct bitbang_spi_master *master, void *spi_data) { struct spi_master mst = spi_master_bitbang; diff --git a/buspirate_spi.c b/buspirate_spi.c index b56d422..3c0a6ff 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -130,38 +130,6 @@ return ret; }
-static struct spi_master spi_master_buspirate = { - .features = SPI_MASTER_4BA, - .max_data_read = MAX_DATA_UNSPECIFIED, - .max_data_write = MAX_DATA_UNSPECIFIED, - .command = NULL, - .multicommand = default_spi_send_multicommand, - .read = default_spi_read, - .write_256 = default_spi_write_256, - .write_aai = default_spi_write_aai, -}; - -static const struct buspirate_speeds spispeeds[] = { - {"30k", 0x0}, - {"125k", 0x1}, - {"250k", 0x2}, - {"1M", 0x3}, - {"2M", 0x4}, - {"2.6M", 0x5}, - {"4M", 0x6}, - {"8M", 0x7}, - {NULL, 0x0} -}; - -static const struct buspirate_speeds serialspeeds[] = { - {"115200", 115200}, - {"230400", 230400}, - {"250000", 250000}, - {"2000000", 2000000}, - {"2M", 2000000}, - {NULL, 0} -}; - static int buspirate_spi_shutdown(void *data) { struct bp_spi_data *bp_data = data; @@ -204,6 +172,38 @@ return ret; }
+static struct spi_master spi_master_buspirate = { + .features = SPI_MASTER_4BA, + .max_data_read = MAX_DATA_UNSPECIFIED, + .max_data_write = MAX_DATA_UNSPECIFIED, + .command = NULL, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, + .write_aai = default_spi_write_aai, +}; + +static const struct buspirate_speeds spispeeds[] = { + {"30k", 0x0}, + {"125k", 0x1}, + {"250k", 0x2}, + {"1M", 0x3}, + {"2M", 0x4}, + {"2.6M", 0x5}, + {"4M", 0x6}, + {"8M", 0x7}, + {NULL, 0x0} +}; + +static const struct buspirate_speeds serialspeeds[] = { + {"115200", 115200}, + {"230400", 230400}, + {"250000", 250000}, + {"2000000", 2000000}, + {"2M", 2000000}, + {NULL, 0} +}; + static int buspirate_spi_send_command_v1(const struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { diff --git a/ch341a_spi.c b/ch341a_spi.c index 185e582..22c9781 100644 --- a/ch341a_spi.c +++ b/ch341a_spi.c @@ -385,20 +385,6 @@ return 0; }
-static const struct spi_master spi_master_ch341a_spi = { - .features = SPI_MASTER_4BA, - /* flashrom's current maximum is 256 B. CH341A was tested on Linux and Windows to accept atleast - * 128 kB. Basically there should be no hard limit because transfers are broken up into USB packets - * sent to the device and most of their payload streamed via SPI. */ - .max_data_read = 4 * 1024, - .max_data_write = 4 * 1024, - .command = ch341a_spi_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = default_spi_read, - .write_256 = default_spi_write_256, - .write_aai = default_spi_write_aai, -}; - static int ch341a_spi_shutdown(void *data) { if (handle == NULL) @@ -419,6 +405,20 @@ return 0; }
+static const struct spi_master spi_master_ch341a_spi = { + .features = SPI_MASTER_4BA, + /* flashrom's current maximum is 256 B. CH341A was tested on Linux and Windows to accept atleast + * 128 kB. Basically there should be no hard limit because transfers are broken up into USB packets + * sent to the device and most of their payload streamed via SPI. */ + .max_data_read = 4 * 1024, + .max_data_write = 4 * 1024, + .command = ch341a_spi_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, + .write_aai = default_spi_write_aai, +}; + static int ch341a_spi_init(void) { if (handle != NULL) { diff --git a/dediprog.c b/dediprog.c index b47e8e9..d98af49 100644 --- a/dediprog.c +++ b/dediprog.c @@ -992,6 +992,24 @@ return millivolt; }
+static int dediprog_shutdown(void *data) +{ + dediprog_devicetype = DEV_UNKNOWN; + + /* URB 28. Command Set SPI Voltage to 0. */ + if (dediprog_set_spi_voltage(0x0)) + return 1; + + if (libusb_release_interface(dediprog_handle, 0)) { + msg_perr("Could not release USB interface!\n"); + return 1; + } + libusb_close(dediprog_handle); + libusb_exit(usb_ctx); + + return 0; +} + static struct spi_master spi_master_dediprog = { .features = SPI_MASTER_NO_4BA_MODES, .max_data_read = 16, /* 18 seems to work fine as well, but 19 times out sometimes with FW 5.15. */ @@ -1037,24 +1055,6 @@ return 0; }
-static int dediprog_shutdown(void *data) -{ - dediprog_devicetype = DEV_UNKNOWN; - - /* URB 28. Command Set SPI Voltage to 0. */ - if (dediprog_set_spi_voltage(0x0)) - return 1; - - if (libusb_release_interface(dediprog_handle, 0)) { - msg_perr("Could not release USB interface!\n"); - return 1; - } - libusb_close(dediprog_handle); - libusb_exit(usb_ctx); - - return 0; -} - static int dediprog_init(void) { char *voltage, *id_str, *device, *spispeed, *target_str; diff --git a/digilent_spi.c b/digilent_spi.c index 8a3699d..0ec402e 100644 --- a/digilent_spi.c +++ b/digilent_spi.c @@ -315,18 +315,6 @@ return 0; }
-static const struct spi_master spi_master_digilent_spi = { - .features = SPI_MASTER_4BA, - .max_data_read = 252, - .max_data_write = 252, - .command = digilent_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = default_spi_read, - .write_256 = default_spi_write_256, - .write_aai = default_spi_write_aai, -}; - - static int digilent_spi_shutdown(void *data) { struct digilent_spi_data *digilent_data = data; @@ -340,6 +328,17 @@ return 0; }
+static const struct spi_master spi_master_digilent_spi = { + .features = SPI_MASTER_4BA, + .max_data_read = 252, + .max_data_write = 252, + .command = digilent_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, + .write_aai = default_spi_write_aai, +}; + static bool default_reset(struct libusb_device_handle *handle) { char board[17]; diff --git a/dummyflasher.c b/dummyflasher.c index 049f9d5..2311576 100644 --- a/dummyflasher.c +++ b/dummyflasher.c @@ -580,7 +580,23 @@ return 0; }
- +static int dummy_shutdown(void *data) +{ + msg_pspew("%s\n", __func__); + struct emu_data *emu_data = (struct emu_data *)data; + if (emu_data->emu_chip != EMULATE_NONE) { + if (emu_data->emu_persistent_image && emu_data->emu_modified) { + msg_pdbg("Writing %s\n", emu_data->emu_persistent_image); + write_buf_to_file(emu_data->flashchip_contents, + emu_data->emu_chip_size, + emu_data->emu_persistent_image); + } + free(emu_data->emu_persistent_image); + free(emu_data->flashchip_contents); + } + free(data); + return 0; +}
static const struct spi_master spi_master_dummyflasher = { .features = SPI_MASTER_4BA, @@ -604,24 +620,6 @@ .chip_writen = dummy_chip_writen, };
-static int dummy_shutdown(void *data) -{ - msg_pspew("%s\n", __func__); - struct emu_data *emu_data = (struct emu_data *)data; - if (emu_data->emu_chip != EMULATE_NONE) { - if (emu_data->emu_persistent_image && emu_data->emu_modified) { - msg_pdbg("Writing %s\n", emu_data->emu_persistent_image); - write_buf_to_file(emu_data->flashchip_contents, - emu_data->emu_chip_size, - emu_data->emu_persistent_image); - } - free(emu_data->emu_persistent_image); - free(emu_data->flashchip_contents); - } - free(data); - return 0; -} - static int init_data(struct emu_data *data, enum chipbustype *dummy_buses_supported) {
diff --git a/it87spi.c b/it87spi.c index cbf830b..e552328 100644 --- a/it87spi.c +++ b/it87spi.c @@ -290,6 +290,12 @@ return 0; }
+static int it8716f_shutdown(void *data) +{ + free(data); + return 0; +} + static const struct spi_master spi_master_it87xx = { .max_data_read = 3, .max_data_write = MAX_DATA_UNSPECIFIED, @@ -300,13 +306,6 @@ .write_aai = spi_chip_write_1, };
- -static int it8716f_shutdown(void *data) -{ - free(data); - return 0; -} - static uint16_t it87spi_probe(uint16_t port) { uint8_t tmp = 0; diff --git a/jlink_spi.c b/jlink_spi.c index 8b8533c..daa8eb6 100644 --- a/jlink_spi.c +++ b/jlink_spi.c @@ -155,19 +155,6 @@ return 0; }
-static const struct spi_master spi_master_jlink_spi = { - /* Maximum data read size in one go (excluding opcode+address). */ - .max_data_read = JTAG_MAX_TRANSFER_SIZE - 5, - /* Maximum data write size in one go (excluding opcode+address). */ - .max_data_write = JTAG_MAX_TRANSFER_SIZE - 5, - .command = jlink_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = default_spi_read, - .write_256 = default_spi_write_256, - .write_aai = default_spi_write_aai, - .features = SPI_MASTER_4BA, -}; - static int jlink_spi_shutdown(void *data) { struct jlink_spi_data *jlink_data = data; @@ -181,6 +168,19 @@ return 0; }
+static const struct spi_master spi_master_jlink_spi = { + /* Maximum data read size in one go (excluding opcode+address). */ + .max_data_read = JTAG_MAX_TRANSFER_SIZE - 5, + /* Maximum data write size in one go (excluding opcode+address). */ + .max_data_write = JTAG_MAX_TRANSFER_SIZE - 5, + .command = jlink_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, + .write_aai = default_spi_write_aai, + .features = SPI_MASTER_4BA, +}; + static int jlink_spi_init(void) { char *arg; diff --git a/lspcon_i2c_spi.c b/lspcon_i2c_spi.c index b590f1d..e9ff2dd 100644 --- a/lspcon_i2c_spi.c +++ b/lspcon_i2c_spi.c @@ -410,16 +410,6 @@ return SPI_GENERIC_ERROR; }
-static const struct spi_master spi_master_i2c_lspcon = { - .max_data_read = 16, - .max_data_write = 12, - .command = lspcon_i2c_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = lspcon_i2c_spi_read, - .write_256 = lspcon_i2c_spi_write_256, - .write_aai = lspcon_i2c_spi_write_aai, -}; - static int lspcon_i2c_spi_shutdown(void *data) { int ret = 0; @@ -436,6 +426,16 @@ return ret; }
+static const struct spi_master spi_master_i2c_lspcon = { + .max_data_read = 16, + .max_data_write = 12, + .command = lspcon_i2c_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = lspcon_i2c_spi_read, + .write_256 = lspcon_i2c_spi_write_256, + .write_aai = lspcon_i2c_spi_write_aai, +}; + static int lspcon_i2c_spi_init(void) { int fd = i2c_open_from_programmer_params(REGISTER_ADDRESS, 0); diff --git a/pickit2_spi.c b/pickit2_spi.c index bec9457..73ace4b 100644 --- a/pickit2_spi.c +++ b/pickit2_spi.c @@ -340,16 +340,6 @@ return millivolt; }
-static const struct spi_master spi_master_pickit2 = { - .max_data_read = 40, - .max_data_write = 40, - .command = pickit2_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = default_spi_read, - .write_256 = default_spi_write_256, - .write_aai = default_spi_write_aai, -}; - static int pickit2_shutdown(void *data) { struct pickit2_spi_data *pickit2_data = data; @@ -388,6 +378,16 @@ return ret; }
+static const struct spi_master spi_master_pickit2 = { + .max_data_read = 40, + .max_data_write = 40, + .command = pickit2_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = default_spi_write_256, + .write_aai = default_spi_write_aai, +}; + static int pickit2_spi_init(void) { uint8_t buf[CMD_LENGTH] = { diff --git a/realtek_mst_i2c_spi.c b/realtek_mst_i2c_spi.c index 22f7e7a..f8949f7 100644 --- a/realtek_mst_i2c_spi.c +++ b/realtek_mst_i2c_spi.c @@ -410,16 +410,6 @@ return SPI_GENERIC_ERROR; }
-static const struct spi_master spi_master_i2c_realtek_mst = { - .max_data_read = 16, - .max_data_write = 8, - .command = realtek_mst_i2c_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = realtek_mst_i2c_spi_read, - .write_256 = realtek_mst_i2c_spi_write_256, - .write_aai = realtek_mst_i2c_spi_write_aai, -}; - static int realtek_mst_i2c_spi_shutdown(void *data) { int ret = 0; @@ -442,6 +432,16 @@ return ret; }
+static const struct spi_master spi_master_i2c_realtek_mst = { + .max_data_read = 16, + .max_data_write = 8, + .command = realtek_mst_i2c_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = realtek_mst_i2c_spi_read, + .write_256 = realtek_mst_i2c_spi_write_256, + .write_aai = realtek_mst_i2c_spi_write_aai, +}; + static int get_params(int *reset, int *enter_isp) { char *reset_str = NULL, *isp_str = NULL; diff --git a/sb600spi.c b/sb600spi.c index c4b25e5..5c65475 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -570,6 +570,17 @@ return 0; }
+static int sb600spi_shutdown(void *data) +{ + struct sb600spi_data *sb600_data = data; + struct flashctx *flash = sb600_data->flash; + if (flash) + finalize_flash_access(flash); + + free(data); + return 0; +} + static const struct spi_master spi_master_sb600 = { .max_data_read = FIFO_SIZE_OLD, .max_data_write = FIFO_SIZE_OLD - 3, @@ -600,17 +611,6 @@ .write_aai = default_spi_write_aai, };
-static int sb600spi_shutdown(void *data) -{ - struct sb600spi_data *sb600_data = data; - struct flashctx *flash = sb600_data->flash; - if (flash) - finalize_flash_access(flash); - - free(data); - return 0; -} - int sb600_probe_spi(struct pci_dev *dev) { struct pci_dev *smbus_dev; diff --git a/serprog.c b/serprog.c index e8d1f52..b207fd2 100644 --- a/serprog.c +++ b/serprog.c @@ -394,6 +394,25 @@ return ret; }
+static int serprog_shutdown(void *data) +{ + if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes)) + if (sp_execute_opbuf() != 0) + msg_pwarn("Could not flush command buffer.\n"); + if (sp_check_commandavail(S_CMD_S_PIN_STATE)) { + uint8_t dis = 0; + if (sp_docommand(S_CMD_S_PIN_STATE, 1, &dis, 0, NULL) == 0) + msg_pdbg(MSGHEADER "Output drivers disabled\n"); + else + msg_pwarn(MSGHEADER "%s: Warning: could not disable output buffers\n", __func__); + } + /* FIXME: fix sockets on windows(?), especially closing */ + serialport_shutdown(&sp_fd); + if (sp_max_write_n) + free(sp_write_n_buf); + return 0; +} + static struct spi_master spi_master_serprog = { .features = SPI_MASTER_4BA, .max_data_read = MAX_DATA_READ_UNLIMITED, @@ -518,25 +537,6 @@ .chip_writen = fallback_chip_writen, };
-static int serprog_shutdown(void *data) -{ - if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes)) - if (sp_execute_opbuf() != 0) - msg_pwarn("Could not flush command buffer.\n"); - if (sp_check_commandavail(S_CMD_S_PIN_STATE)) { - uint8_t dis = 0; - if (sp_docommand(S_CMD_S_PIN_STATE, 1, &dis, 0, NULL) == 0) - msg_pdbg(MSGHEADER "Output drivers disabled\n"); - else - msg_pwarn(MSGHEADER "%s: Warning: could not disable output buffers\n", __func__); - } - /* FIXME: fix sockets on windows(?), especially closing */ - serialport_shutdown(&sp_fd); - if (sp_max_write_n) - free(sp_write_n_buf); - return 0; -} - static enum chipbustype serprog_buses_supported = BUS_NONE;
static int serprog_init(void) diff --git a/wbsio_spi.c b/wbsio_spi.c index c3814aa..2336845 100644 --- a/wbsio_spi.c +++ b/wbsio_spi.c @@ -177,6 +177,12 @@ return 0; }
+static int wbsio_spi_shutdown(void *data) +{ + free(data); + return 0; +} + static const struct spi_master spi_master_wbsio = { .max_data_read = MAX_DATA_UNSPECIFIED, .max_data_write = MAX_DATA_UNSPECIFIED, @@ -187,12 +193,6 @@ .write_aai = spi_chip_write_1, };
-static int wbsio_spi_shutdown(void *data) -{ - free(data); - return 0; -} - int wbsio_check_for_spi(void) { uint16_t wbsio_spibase = 0;
-
Anastasia Klimchuk (Code Review)