[XS] Change in flashrom[main]: linux_mtd: Provide no-op delay implementation

[Anastasia Klimchuk (Code Review)]

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/80771?usp=email )

Change subject: linux_mtd: Provide no-op delay implementation
......................................................................

linux_mtd: Provide no-op delay implementation

Flashrom has several magic programmer_delay() calls scattered throughout
its codebase (see cli_classic.s/main() and
flashrom.c/flashrom_image_write(), at least). These delays are
superfluous for the linux_mtd programmer, because it's an opaque
programmer in which all protocol details are handled by the kernel
driver.

Stub out the delay function, so we don't waste up to 1.1 seconds of
needless delay time, depending on the operation and CLI vs libflashrom
usage.

BUG=b:325539928
TEST=`elogtool add 0xa7` on a linux_mtd system (such as a Mediatek
       Chromebook):
     Time improvement - reduces from ~1.5s wall clock to about 0.4s
     CPU usage: -90%, as most of the CPU cycles (before this change) are
       spent in needless magic-delay busy loops

Change-Id: I3ac69d3fd7cfc689c5b32c130d044516ed846c29
Signed-off-by: Brian Norris 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/80771
Tested-by: build bot (Jenkins) 
Reviewed-by: Anastasia Klimchuk 
---
M linux_mtd.c
1 file changed, 9 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Anastasia Klimchuk: Looks good to me, approved

diff --git a/linux_mtd.c b/linux_mtd.c
index 495db9a..eea0cf2 100644
--- a/linux_mtd.c
+++ b/linux_mtd.c
@@ -429,6 +429,14 @@
    return FLASHROM_WP_ERR_RANGE_LIST_UNAVAILABLE;
 }

+static void linux_mtd_nop_delay(const struct flashctx *flash, unsigned int usecs)
+{
+	/*
+	 * Ignore delay requests. The Linux MTD framework brokers all flash
+	 * protocol, including timing, resets, etc.
+	 */
+}
+
 static const struct opaque_master linux_mtd_opaque_master = {
    /* max_data_{read,write} don't have any effect for this programmer */
    .max_data_read	= MAX_DATA_UNSPECIFIED,
@@ -441,6 +449,7 @@
    .wp_read_cfg	= linux_mtd_wp_read_cfg,
    .wp_write_cfg	= linux_mtd_wp_write_cfg,
    .wp_get_ranges	= linux_mtd_wp_get_available_ranges,
+	.delay		= linux_mtd_nop_delay,
 };

/* Returns 0 if setup is successful, non-zero to indicate error */