David Hendricks has uploaded a new change for review. ( https://review.coreboot.org/19340 )
Change subject: Copy test_v2 directory from chromiumos branch ......................................................................
Copy test_v2 directory from chromiumos branch
This is a straight copy and should not be merged. The full patch series will eventually be imported, but for now this is just a hack to get stuff working.
Change-Id: I41bef98d32df61af400ecac46ea9571e722b2ac6 Signed-off-by: David Hendricks dhendricks@fb.com --- A tests/tests_v2/cmd.sh A tests/tests_v2/servo_hooks.sh A tests/tests_v2/test_v2.sh 3 files changed, 1,371 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/40/19340/1
diff --git a/tests/tests_v2/cmd.sh b/tests/tests_v2/cmd.sh new file mode 100755 index 0000000..1d1c47a --- /dev/null +++ b/tests/tests_v2/cmd.sh @@ -0,0 +1,137 @@ +#!/bin/sh +# +# This file is part of the flashrom project. It is derived from +# board_status.sh in coreboot. +# +# Copyright (C) 2016 Google Inc. +# Copyright (C) 2014 Sage Electronic Engineering, LLC. + +USE_CUSTOM_HOOKS=0 +if [ -n "$CUSTOM_HOOKS_FILENAME" ]; then + USE_CUSTOM_HOOKS=1 + . "$CUSTOM_HOOKS_FILENAME" + if [ $? -ne 0 ]; then + echo "Failed to source custom hooks file." + exit $EXIT_FAILURE + fi + + if ! custom_hook_sanity_check; then + echo "Failed to run sanity check for custom hooks." + exit $EXIT_FAILURE + fi +fi + +# test a command +# +# $1: 0 ($LOCAL) to run command locally, +# 1 ($REMOTE) to run remotely if remote host defined +# $2: command to test +# $3: 0 ($FATAL) Exit with an error if the command fails +# 1 ($NONFATAL) Don't exit on command test failure +test_cmd() +{ + local rc + local cmd__="$(echo $2 | cut -d ' ' -f -1)" + local args="$(echo $2 | cut -d ' ' -f 2-)" + + if [ -e "$cmd__" ]; then + return + fi + + if [ "$1" -eq "$REMOTE" ] && [ -n "$REMOTE_HOST" ]; then + ssh $REMOTE_PORT_OPTION root@${REMOTE_HOST} command -v "$cmd__" $args > /dev/null 2>&1 + rc=$? + else + command -v "$cmd__" $args >/dev/null 2>&1 + rc=$? + fi + + if [ $rc -eq 0 ]; then + return 0 + fi + + if [ "$3" = "1" ]; then + return 1 + fi + + echo "$2 not found" + exit $EXIT_FAILURE +} + +# Same args as cmd() but with the addition of $4 which determines if the +# command should be totally silenced or not. +_cmd() +{ + local silent=$4 + local rc=0 + + if [ -n "$3" ]; then + pipe_location="${3}" + else + pipe_location="/dev/null" + fi + + if [ $1 -eq $REMOTE ] && [ -n "$REMOTE_HOST" ]; then + if [ $silent -eq 0 ]; then + ssh $REMOTE_PORT_OPTION "root@${REMOTE_HOST}" "$2" > "$pipe_location" 2>/dev/null + rc=$? + else + ssh $REMOTE_PORT_OPTION "root@${REMOTE_HOST}" "$2" >/dev/null 2>&1 + rc=$? + fi + else + if [ $USE_CUSTOM_HOOKS -eq 1 ]; then + preflash_hook $1 "$2" "$3" $4 + fi + + if [ $silent -eq 0 ]; then + $SUDO_CMD $2 > "$pipe_location" 2>/dev/null + rc=$? + else + $SUDO_CMD $2 >/dev/null 2>&1 + rc=$? + fi + + if [ $USE_CUSTOM_HOOKS -eq 1 ]; then + postflash_hook $1 "$2" "$3" $4 + fi + fi + + return $rc +} + +# run a command +# +# $1: 0 ($LOCAL) to run command locally, +# 1 ($REMOTE) to run remotely if remote host defined +# $2: command +# $3: filename to direct output of command into +cmd() +{ + _cmd $1 "$2" "$3" 0 + + if [ $? -eq 0 ]; then + return + fi + + echo "Failed to run "$2", aborting" + rm -f "$3" # don't leave an empty file + return $EXIT_FAILURE +} + +# run a command silently +# +# $1: 0 ($LOCAL) to run command locally, +# 1 ($REMOTE) to run remotely if remote host defined +# $2: command +scmd() +{ + _cmd $1 "$2" "" 1 + + if [ $? -eq 0 ]; then + return + fi + + echo "Failed to run "$2", aborting" + return $EXIT_FAILURE +} diff --git a/tests/tests_v2/servo_hooks.sh b/tests/tests_v2/servo_hooks.sh new file mode 100644 index 0000000..01033e8 --- /dev/null +++ b/tests/tests_v2/servo_hooks.sh @@ -0,0 +1,128 @@ +#!/bin/sh +# +# Copyright (C) 2016 Google Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# Voltage gets exported from test_v2.sh and is mandatory for Servo. +if [ -z "$VOLTAGE" ]; then + echo "Must specify voltage when using Servo." + exit $EXIT_FAILURE +fi + +# Users who have multiple Servos attached might need to override port. +if [ -z "$SERVO_PORT" ]; then + SERVO_PORT="9999" +fi + +# Servo's SPI1 channel targets the EC, SPI2 targets the host ROM. +if [ -z "$SERVO_SPI" ]; then + SERVO_SPI="spi2" +fi + +custom_hook_sanity_check() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} ${SERVO_SPI}_buf_en ${SERVO_SPI}_buf_on_flex_en ${SERVO_SPI}_vref >/dev/null + rc=$? + if [ $rc -ne 0 ]; then + printf "Servo sanity check failed. Some possible causes:\n" + printf "\t- Is servod running?\n" + printf "\t- If servod is not listening on port 9999, set SERVO_PORT as an environment variable.\n" + fi + + return $rc +} + +preflash_hook() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} ${SERVO_SPI}_buf_en:on ${SERVO_SPI}_buf_on_flex_en:on ${SERVO_SPI}_vref:pp${VOLTAGE} + rc=$? + sleep 1 + + return $rc +} + +postflash_hook() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} ${SERVO_SPI}_buf_en:off ${SERVO_SPI}_buf_on_flex_en:off + rc=$? + sleep 1 + + return $rc +} + +wp_sanity_check() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} fw_wp_en fw_wp_vref fw_wp >/dev/null + rc=$? + if [ $rc -ne 0 ]; then + printf "dut-control failed. Check that servod is running.\n" + fi + + return $rc +} + +wp_enable_hook() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} fw_wp_en:on fw_wp_vref:pp${VOLTAGE} + rc=$? + sleep 1 + + return $rc +} + +wp_on_hook() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} fw_wp:on + rc=$? + sleep 1 + + return $rc +} + +wp_off_hook() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} fw_wp:off + rc=$? + sleep 1 + + return $rc +} + +wp_disable_hook() +{ + local rc=0 + + dut-control --port=${SERVO_PORT} fw_wp_en:off fw_wp_vref:off + rc=$? + sleep 1 + + return $rc +} diff --git a/tests/tests_v2/test_v2.sh b/tests/tests_v2/test_v2.sh new file mode 100755 index 0000000..4c15c36 --- /dev/null +++ b/tests/tests_v2/test_v2.sh @@ -0,0 +1,1106 @@ +#!/bin/sh +# +# Copyright (C) 2016 Google Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +# Documentation for this script currently resides at: https://goo.gl/qNwdmm + +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +RC=$EXIT_SUCCESS +FATAL=0 +NONFATAL=1 + +# +# Stuff obtained from command-line +# + +# Generic options +BACKUP_IMAGE="" +OLD_FLASHROM="" +NEW_FLASHROM="" +NO_CLEAN=0 +SKIP_CONSISTENCY_CHECK=0 +UPLOAD_RESULTS=0 + +# LOCAL_FLASHROM is required if both a secondary programmer *and* a remote host +# are used since OLD_FLASHROM and NEW_FLASHROM will be called on the remote +# host and we need a local copy of flashrom to control the secondary programmer. +# By default this will be set to the result of `which flashrom`. +LOCAL_FLASHROM="" + +# Primary/Secondary programmer options +PRIMARY_OPTS="" +SECONDARY_OPTS="" + +# Calls preflash_hook() and postflash_hook() before and after doing a command. +CUSTOM_HOOKS_FILENAME="" + +# if doing wp test, we require the commands that the programmer uses to enable/disable wp +WP_HOOKS_FILENAME="" + +# logfile to store the script's output +SCRIPT_LOGFILE="flashrom-test_script_output.txt" + +# Information stored to restore dut WP state at the end of a writeprotect test. +HW_WP_STATE=0 +SW_WP_STATE=0 +WP_RANGE_START=0 +WP_RANGE_LEN=0 + +# Test type +TEST_TYPE_UNKNOWN=0 +TEST_TYPE_SINGLE=1 +TEST_TYPE_ENDURANCE=2 +TEST_TYPE_WRITEPROTECT=3 +TEST_TYPE=$TEST_TYPE_UNKNOWN + +# Region modes +REGION_MODE_UNKNOWN=0 +REGION_MODE_CLOBBER=1 +REGION_MODE_DESCRIPTOR=2 +REGION_MODE_FLASHMAP=3 +REGION_MODE_LAYOUT=4 +REGION_MODE=$REGION_MODE_UNKNOWN +DESCRIPTOR_REGION="BIOS" +FLASHMAP_REGION="RW_SECTION_A" +LAYOUT_FILE="" +LAYOUT_REGION="RW" +SMALL_REGION=0 + +# Remote testing options +SSH_PORT="" +REMOTE_HOST="" +REMOTE_PORT_OPTION="" +REMOTE_ONLY=0 +REMOTE_PROGRAMMER_PARAMS="" +SSH_CMD="ssh $REMOTE_PORT_OPTION root@${REMOTE_HOST} command -v" + +LOCAL=0 +REMOTE=1 +DO_REMOTE=0 # boolean to use for cmd() and tests + +WP_DISABLE=0 +WP_ENABLE=1 + +# In case we need to run flashrom locally and we're not already root. +SUDO_CMD="" +if [ "$(id -u)" -ne "0" ]; then + SUDO_CMD="sudo" +fi + +# 1KB +K=1024 + +show_help() { + printf "Usage: + ${0} <options> + +General options: + -b, --backup-image <path> + Backup image to write unconditionally at end of testing. + -h, --help + Show this message. + -l, --layout-file <path> + Layout file (required if mode is "layout", resides locally). + -m, --mode <arg> + Region access mode (clobber, descriptor, flashmap, layout). + -n, --new <path> + Path to new version of flashrom. + -o, --old <path> + Path to old (stable) version of flashrom. + -p, --primary-programmer <parameters> + Primary programmer options. + -r, --remote-host <host> + Remote host to test primary programmer on. + -s, --secondary-programmer <parameters> + Secondary programmer options. + -t, --type <arg> + Test type (single, endurance, writeprotect). + -u, --upload-results + Upload results to flashrom.org. + -v, --voltage + Chip voltage in millivolts (usually 1800 or 3300). + +Long options: + --custom-hooks <filename> + Supply a script with custom hooks to run before and after commands. + --descriptor-region <name> + Specify region to use in descriptor mode (default: $DESCRIPTOR_REGION) + --flashmap-region <name> + Specify region to use in flashmap mode (default: $FLASHMAP_REGION) + --layout-region <name> + Specify region to use in layout mode (default: $LAYOUT_REGION) + --local-flashrom <path> + Path to local version of flashrom when using both a secondary programmer + and remote host (default: $($SUDO_CMD which flashrom)) + --no-clean + Do not remove temporary files. + --skip-consistency-check + Skip the consistency check (two consecutive reads) at beginning. + --small-region + Omit tests that require large amounts of space (>16KB). + --wp-hooks <filename> + Supply a script with commands that the connected external programmer + uses to enable and disable write protect for the DUT. This is required + when running a write-protect test. +Remote connectivity options: + --ssh-port <port> + Use a specific SSH port. + +See documentation for usage examples (TODO: Migrate https://goo.gl/3jNoL7 +to flashrom wiki).\n +" +} + +getopt -T +if [ $? -ne 4 ]; then + printf "GNU-compatible getopt(1) required.\n" + exit $EXIT_FAILURE +fi + +LONGOPTS="backup-image:,help,,new:,old:,remote-host:,upload-results:" +LONGOPTS="${LONGOPTS},primary-programmer:,secondary-programmer:,local-flashrom:" +LONGOPTS="${LONGOPTS},custom-hooks:,mode:,skip-consistency-check,small-region" +LONGOPTS="${LONGOPTS},wp-hooks:,type:,voltage:" +LONGOPTS="${LONGOPTS},layout-file:,descriptor-region:,flashmap-region:,layout-region:" +LONGOPTS="${LONGOPTS},no-clean" +LONGOPTS="${LONGOPTS},ssh-port:" + +ARGS=$(getopt -o b:hl:m:n:o:p:r:s:t:u -l "$LONGOPTS" -n "$0" -- "$@"); +if [ $? != 0 ] ; then printf "Terminating...\n" >&2 ; exit 1 ; fi +eval set -- "$ARGS" +while true ; do + case "$1" in + # Generic options + -b|--backup-image) + shift + BACKUP_IMAGE="$1" + ;; + -h|--help) + show_help + exit $EXIT_SUCCESS + ;; + -l|--layout-file) + shift + LAYOUT_FILE="$1" + ;; + -m|--mode) + shift + if [ "$1" = "clobber" ]; then + REGION_MODE=$REGION_MODE_CLOBBER + elif [ "$1" = "descriptor" ]; then + REGION_MODE=$REGION_MODE_DESCRIPTOR + elif [ "$1" = "flashmap" ]; then + REGION_MODE=$REGION_MODE_FLASHMAP + elif [ "$1" = "layout" ]; then + REGION_MODE=$REGION_MODE_LAYOUT + else + printf "Unknown mode: $1\n" + exit $EXIT_FAILURE + fi + ;; + -n|--new) + shift + NEW_FLASHROM="$1" + ;; + -o|--old) + shift + OLD_FLASHROM="$1" + ;; + -p|--primary_programmer) + shift + PRIMARY_OPTS="-p $1" + ;; + -s|--secondary_programmer) + shift + SECONDARY_OPTS="-p $1" + ;; + -t|--type) + shift + if [ "$1" = "single" ]; then + TEST_TYPE=$TEST_TYPE_SINGLE + elif [ "$1" = "endurance" ]; then + TEST_TYPE=$TEST_TYPE_ENDURANCE + elif [ "$1" = "writeprotect" ]; then + TEST_TYPE=$TEST_TYPE_WRITEPROTECT + else + printf "Unknown type: $1\n" + exit $EXIT_FAILURE + fi + ;; + -r|--remote-host) + DO_REMOTE=1 + shift + REMOTE_HOST="$1" + ;; + -u|--upload-results) + UPLOAD_RESULTS=1 + ;; + -v|--voltage) + shift + VOLTAGE="$1" + ;; + + # Longopts only + --custom-hooks) + shift + CUSTOM_HOOKS_FILENAME="$1" + ;; + --descriptor-region) + shift + DESCRIPTOR_REGION="$1" + ;; + --flashmap-region) + shift + FLASHMAP_REGION="$1" + ;; + --layout-region) + shift + LAYOUT_REGION="$1" + ;; + --local-flashrom) + shift + LOCAL_FLASHROM="$1" + ;; + --no-clean) + NO_CLEAN=1 + ;; + --skip-consistency-check) + SKIP_CONSISTENCY_CHECK=1 + ;; + --small-region) + SMALL_REGION=1 + ;; + --wp-hooks) + shift + WP_HOOKS_FILENAME="$1" + ;; + + # Remote testing options + --ssh-port) + shift + REMOTE_PORT_OPTION="-p $1" + ;; + + # error handling + --) + shift + if [ -n "$*" ]; then + printf "Non-option parameters detected: '$*'\n" + exit $EXIT_FAILURE + fi + break + ;; + *) + printf "error processing options at '$1'\n" + exit $EXIT_FAILURE + esac + shift +done + +# TODO: Implement this. +if [ $UPLOAD_RESULTS -eq 1 ]; then + printf "TODO: Implement ability to upload results.\n" + exit $EXIT_FAILURE +fi + +# +# Source helper scripts +# +export REMOTE_HOST REMOTE_PORT_OPTION +export LOCAL REMOTE FATAL NONFATAL EXIT_SUCCESS EXIT_FAILURE +export CUSTOM_HOOKS_FILENAME SUDO_CMD VOLTAGE +. "$(pwd)/tests/tests_v2/cmd.sh" + +# We will set up a logs directory within the tmpdirs to store +# all output logs. +LOGS="logs" + +# Setup temporary working directories: +# LOCAL_TMPDIR: Working directory on local host. +# REMOTE_TMPDIR: Working directory on remote host. +# TMPDIR: The temporary directy in which we do most of the work. This is +# convenient for commands that depend on $DO_REMOTE. +LOCAL_TMPDIR=$(mktemp -d --tmpdir flashrom_test.XXXXXXXX) +if [ $? -ne 0 ] ; then + printf "Could not create temporary directory\n" + exit $EXIT_FAILURE +fi +mkdir "${LOCAL_TMPDIR}/${LOGS}" + +if [ $DO_REMOTE -eq 1 ]; then + REMOTE_TMPDIR=$(ssh root@${REMOTE_HOST} mktemp -d --tmpdir flashrom_test.XXXXXXXX) + if [ $? -ne 0 ] ; then + printf "Could not create temporary directory\n" + exit $EXIT_FAILURE + fi + scmd $REMOTE "mkdir ${REMOTE_TMPDIR}/${LOGS}" +fi + +if [ $DO_REMOTE -eq 0 ]; then + TMPDIR="$LOCAL_TMPDIR" +else + TMPDIR="$REMOTE_TMPDIR" +fi + +# +# Test command-line validity. +# +if [ $TEST_TYPE -eq $TEST_TYPE_UNKNOWN ]; then + printf "Must specify a test type (-t/--type).\n" + exit $EXIT_FAILURE +elif [ $TEST_TYPE -eq $TEST_TYPE_SINGLE ]; then + if [ $REGION_MODE -eq $REGION_MODE_UNKNOWN ]; then + printf "Must specify a region access mode (-m/--mode).\n" + exit $EXIT_FAILURE + elif [ $REGION_MODE -eq $REGION_MODE_LAYOUT ]; then + if [ -z "$LAYOUT_FILE" ]; then + printf "Must specify a layout file when using layout mode.\n" + exit $EXIT_FAILURE + fi + + scmd $DO_REMOTE "stat $LAYOUT_FILE" + if [ $? -ne 0 ]; then + if [ $DO_REMOTE -eq 1 ]; then + tmp=" on remote host $REMOTE_HOST." + else + tmp=" on local host." + fi + printf "Layout file $LAYOUT_FILE not found${tmp}\n" + exit $EXIT_FAILURE + fi + + if [ $DO_REMOTE -eq 1 ]; then + scp root@"${REMOTE_HOST}:$LAYOUT_FILE" "${LOCAL_TMPDIR}/" 2>&1 >/dev/null + fi + fi +elif [ $TEST_TYPE -eq $TEST_TYPE_WRITEPROTECT ]; then + if [ -z "$WP_HOOKS_FILENAME" ] || [ ! -e "$WP_HOOKS_FILENAME" ]; then + printf "Must specify a wp hooks file when doing a write-protect test.\n" + exit $EXIT_FAILURE + fi + + if [ -z "$VOLTAGE" ]; then + printf "Voltage (mV) must be specified when testing write protection.\n" + exit $EXIT_FAILURE + fi + + . "$WP_HOOKS_FILENAME" + + wp_sanity_check + if [ $? -ne $EXIT_SUCCESS ]; then + printf "Write-protect sanity check failed.\n" + exit $EXIT_FAILURE + fi +fi + +if [ -n "$VOLTAGE" ]; then + echo "$VOLTAGE" | grep -q '[^0-9]' + if [ $? -ne 1 ]; then + printf "Voltage must be an integer with units of millivolts." + exit $EXIT_FAILURE + fi +fi + +if [ $DO_REMOTE -eq 1 ]; then + # Test connection to remote host + test_cmd $DO_REMOTE "ls /" $NONFATAL + if [ $? -ne 0 ]; then + printf "Could not connect to remote host ${REMOTE_HOST}\n" + exit $EXIT_FAILURE + fi +fi + +# Remote host and secondary programmer are in use, so either the user must +# specify a local version of flashrom to control the secondary programmer +# or it must be found in the default path. +if [ $DO_REMOTE -eq 1 ] && [ -n "$SECONDARY_OPTS" ]; then + if [ -z "$LOCAL_FLASHROM" ]; then + LOCAL_FLASHROM="$($SUDO_CMD which flashrom)" + fi + + if [ ! -e "$LOCAL_FLASHROM" ]; then + printf "$LOCAL_FLASHROM does not exist\n" + exit $EXIT_FAILURE + fi +fi + +# +# Dependencies +# + +# cmp is used to compare files +test_cmd $DO_REMOTE "cmp" $FATAL + +if [ ! -e "/dev/urandom" ]; then + printf "This script uses /dev/urandom\n" + exit $EXIT_FAILURE +fi + +if [ ! -e "/dev/zero" ]; then + printf "This script uses /dev/zero\n" + exit $EXIT_FAILURE +fi + +# +# Setup. +# +grep -rH 'projectname = .*flashrom' .git/config >/dev/null 2>&1 +if [ $? -ne 0 ]; then + printf "Script must be run from root of flashrom directory\n" + exit $EXIT_FAILURE +fi + +if [ -z "$OLD_FLASHROM" ]; then + if [ $DO_REMOTE -eq 1 ]; then + OLD_FLASHROM="$(ssh root@${REMOTE_HOST} which flashrom)" + else + OLD_FLASHROM="$($SUDO_CMD which flashrom)" + fi +fi +test_cmd $DO_REMOTE "$OLD_FLASHROM --help" $NONFATAL +if [ $? -ne 0 ]; then + printf "Old flashrom binary is not usable.\n" + exit $EXIT_FAILURE +fi + +# Check if both flashrom binaries support logging +scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS --flash-name -o ${TMPDIR}/flash_name.txt" +if [ $? -ne 0 ]; then + printf "Old flashrom binary does not support logging.\n" + exit $EXIT_FAILURE +fi +scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS --flash-name -o ${TMPDIR}/flash_name.txt" +if [ $? -ne 0 ]; then + printf "New flashrom binary does not support logging.\n" + exit $EXIT_FAILURE +fi +scmd $DO_REMOTE "rm -f ${TMPDIR}/flash_name.txt" + +# print $1 and store it in the script log file +print_and_log() +{ + printf "$1" | tee -a "${LOCAL_TMPDIR}/${LOGS}/${SCRIPT_LOGFILE}" +} + +# Copy files from local tmpdir to remote host tmpdir +copy_to_remote() +{ + for F in $@; do + scp "${LOCAL_TMPDIR}/${F}" root@"${REMOTE_HOST}:${REMOTE_TMPDIR}" 2>&1 >/dev/null + done +} + +# Copy files from remote host tmpdir to local tmpdir +copy_from_remote() +{ + for F in $@; do + scp root@"${REMOTE_HOST}:${REMOTE_TMPDIR}/${F}" "${LOCAL_TMPDIR}/" 2>&1 >/dev/null + done +} + +# A wrapper for scmd calls to flashrom when we want to log the output +# $1: 0 ($LOCAL) to run command locally, +# 1 ($REMOTE) to run remotely if remote host defined +# $2: arguments to be passed into scmd +# $3: context of the flashrom call (to be used in the logfile) +flashrom_log_scmd() +{ + local logfile="flashrom-${3}.txt" + local rc + + if [ $1 -eq $REMOTE ]; then + tmpdir=$REMOTE_TMPDIR + else + tmpdir=$LOCAL_TMPDIR + fi + + scmd $1 "$2 -o ${tmpdir}/${LOGS}/${logfile}"; rc=$? + # if the call was successful, we don't want to save the log (only save failure logs) + if [ $rc -eq $EXIT_SUCCESS ]; then + scmd $1 "rm -f ${tmpdir}/${LOGS}/${logfile}" + else + # if the log was stored remotely, we want to copy it over to local tmpdir + if [ $1 -eq $REMOTE ]; then + scp root@"${REMOTE_HOST}:${REMOTE_TMPDIR}/${LOGS}/${logfile}" "${LOCAL_TMPDIR}/${LOGS}" 2>&1 >/dev/null + fi + fi + + return $rc +} + +# Read current image as backup in case one hasn't already been specified. +if [ -z "$BACKUP_IMAGE" ]; then + backup_file="backup.bin" + if [ $DO_REMOTE -eq 1 ]; then + BACKUP_IMAGE="${REMOTE_TMPDIR}/${backup_file}" + else + BACKUP_IMAGE="${LOCAL_TMPDIR}/${backup_file}" + fi + + print_and_log "Reading backup image..." + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -r $BACKUP_IMAGE" "read_backup" + + if [ $? -ne 0 ]; then + print_and_log "Failed to read backup image, aborting.\n" + exit $EXIT_FAILURE + fi + + if [ $DO_REMOTE -eq 1 ]; then + copy_from_remote "$backup_file" + fi +else + if [ $DO_REMOTE -eq 1 ]; then + scmd $DO_REMOTE "cp $BACKUP_IMAGE $REMOTE_TMPDIR" + copy_from_remote "$(basename $BACKUP_IMAGE)" + fi +fi + +# The copy of flashrom to test. If unset, we'll assume the user wants to test +# a newly built flashrom binary in the current directory. +if [ -z "$NEW_FLASHROM" ] ; then + if [ -x "flashrom" ]; then + NEW_FLASHROM="flashrom" + else + print_and_log "Must supply new flashrom version to test\n" + exit $EXIT_FAILURE + fi +fi + +print_and_log "Stable flashrom binary: ${OLD_FLASHROM}\n" +print_and_log "New flashrom binary to test: ${NEW_FLASHROM}\n" +print_and_log "Local temporary files will be stored in ${LOCAL_TMPDIR}\n" +if [ $DO_REMOTE -eq 1 ]; then + print_and_log "Remote temporary files will be stored in ${REMOTE_HOST}:${REMOTE_TMPDIR}\n" + print_and_log "Backup image: ${REMOTE_HOST}:${BACKUP_IMAGE}\n" + print_and_log "Backup image also stored at: ${LOCAL_TMPDIR}/$(basename ${BACKUP_IMAGE})\n" +else + print_and_log "Backup image: ${BACKUP_IMAGE}\n" +fi + +# +# Now the fun begins. +# +cmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS --get-size" "${LOCAL_TMPDIR}/chip_size.txt" +tmp=$(cat ${LOCAL_TMPDIR}/chip_size.txt) +cmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS --get-size" "${LOCAL_TMPDIR}/chip_size.txt" +CHIP_SIZE=$(cat ${LOCAL_TMPDIR}/chip_size.txt) +CHIP_SIZE_KB=$(($CHIP_SIZE / $K)) +CHIP_SIZE_HALF=$(($CHIP_SIZE / 2)) +if [ $CHIP_SIZE -ne $tmp ]; then + print_and_log "New flashrom and old flashrom disagree on chip size. Aborting.\n" + exit $EXIT_FAILURE +else + print_and_log "Chip size: $CHIP_SIZE_KB KiB\n" +fi + +# Upload results +#do_upload() +#{ +# # TODO: implement this +#} + +# Remove temporary files +do_cleanup() +{ + if [ $NO_CLEAN -eq 1 ]; then + print_and_log "Skipping cleanup.\n" + return $EXIT_SUCCESS + fi + + rm -rf "$LOCAL_TMPDIR" + if [ -n "$REMOTE_HOST" ]; then + ssh root@${REMOTE_HOST} rm -rf "$REMOTE_TMPDIR" + fi + + return $EXIT_SUCCESS +} + +# $1: Message to display to user. +test_fail() +{ + print_and_log "$1\n" + printf "Skipping cleanup (logs saved).\n" + exit $EXIT_FAILURE +} + +write_backup_image() +{ + print_and_log "Writing backup image.\n" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -w $BACKUP_IMAGE" "write_backup" +} + +save_wp_state() +{ + print_and_log "Saving initial write protect state\n" + if [ $DO_REMOTE -eq $REMOTE ]; then + cmd $DO_REMOTE "crossystem wpsw_cur" "${LOCAL_TMPDIR}/hw_wp_state.txt" + HW_WP_STATE=$(cat ${LOCAL_TMPDIR}/hw_wp_state.txt ) + fi + + cmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS --wp-status" "${LOCAL_TMPDIR}/wp_range.txt" + if grep -q 'enabled' "${LOCAL_TMPDIR}/wp_range.txt"; then + SW_WP_STATE=1 + else + SW_WP_STATE=0 + fi + + WP_RANGE_START=$(grep 'range' "${LOCAL_TMPDIR}/wp_range.txt" | grep -o -E 'start=0x[0-9]*' | cut -d '=' -f 2-) + WP_RANGE_LEN=$(grep 'range' "${LOCAL_TMPDIR}/wp_range.txt" | grep -o -E 'len=0x[0-9]*' | cut -d '=' -f 2-) +} + +restore_wp_state() +{ + print_and_log "Restoring initial write protect state\n" + local restore_opts="--wp-range $WP_RANGE_START $WP_RANGE_LEN" + + if [ $SW_WP_STATE -eq 1 ]; then + restore_opts="--wp-enable $restore_opts" + elif [ $SW_WP_STATE -eq 0 ]; then + restore_opts="--wp-disable $restore_opts" + fi + + wp_enable_hook + wp_off_hook + scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS $restore_opts" + # if we are running on a remote machine, we stored the hw wp state and can restore now + if [ $DO_REMOTE -eq $REMOTE ] && [ $HW_WP_STATE -eq 1 ]; then + wp_on_hook + fi + wp_disable_hook +} + +# $1 is 0/1 for disable/enable +# $2 and $3 are range start and range length +set_wp_state() +{ + local wp_opts="--wp-range $2 $3" + if [ $1 -eq $WP_DISABLE ]; then + wp_opts="--wp-disable $wp_opts" + elif [ $1 -eq $WP_ENABLE ]; then + wp_opts="--wp-enable $wp_opts" + else + #invalid argument + return $EXIT_FAILURE + fi + + wp_enable_hook + wp_off_hook + scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS $wp_opts" + wp_on_hook + wp_disable_hook +} + +# this saves us some repeated code in the writeprotect test +# $1 is the message to be passed into test_fail() +wp_test_fail() +{ + set_wp_state $WP_DISABLE 0 0 # completely disable wp so we can write the backup + write_backup_image + restore_wp_state # restore the fw and sw writeprotect states to the initial saved states. + test_fail "$1" +} + +# Read a region twice and compare results +# $1: address of region (in bytes) +# $2: length of region (in bytes) +double_read_test() +{ + local cmp1="${TMPDIR}/cmp1.bin" + local cmp2="${TMPDIR}/cmp2.bin" + local layout="double_read_test_layout.txt" + local len=$(($2 / $K)) + + print_and_log "Doing double read test, size: $len KiB\n" + # FIXME: Figure out how to do printf remotely... + printf "%06x:%06x region\n" $1 $(($1 + $2 - 1)) > "${LOCAL_TMPDIR}/${layout}" + if [ $DO_REMOTE -eq 1 ]; then copy_to_remote "$layout" ; fi + + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -r -l ${TMPDIR}/${layout} --ignore-fmap -i region:${cmp1}" "double_read_1" + # FIXME: second (or maybe third?) read should be done using secondary programmer, if applicable. + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -r -l ${TMPDIR}/${layout} --ignore-fmap -i region:${cmp2}" "double_read_2" + scmd $DO_REMOTE "cmp $cmp1 $cmp2" + if [ $? -ne 0 ]; then + test_fail "Double-read test failed, aborting." + fi +} + +PARTIAL_WRITE_TEST_REGION_SIZE=0 +PARTIAL_WRITE_TEST_ALIGN_SIZE_KB=0 + +# helper function to reduce repetitiveness of partial_write_test +partial_write_test_helper() +{ + local test_name="$1" + local offset_kb=$2 + local size_kb=$3 + local hex="$4" + local oct="" + + oct="\$(printf "%03o" $hex)" + cp "${LOCAL_TMPDIR}/random_4k_test.bin" "${LOCAL_TMPDIR}/${test_name}.bin" + dd if=/dev/zero bs=1k count=${size_kb} 2>/dev/null | tr "\000" "$oct" > "${LOCAL_TMPDIR}/${hex}_${size_kb}k.bin" + while [ $(($(($offset_kb + $size_kb)) * $K)) -lt $PARTIAL_WRITE_TEST_REGION_SIZE ]; do + dd if="${LOCAL_TMPDIR}/${hex}_${size_kb}k.bin" of="${LOCAL_TMPDIR}/${test_name}.bin" bs=1k count=${size_kb} seek=${offset_kb} conv=notrunc 2>/dev/null + offset_kb=$(($offset_kb + $PARTIAL_WRITE_TEST_ALIGN_SIZE_KB)) + done +} + +# Regional partial write test. Given a region name, this will write patterns +# of bytes designed to test corner cases. +# +# We assume that eraseable block size can be either 4KB or 64KB and +# must test for both. For simplicity, we'll assume the region size is +# at least 256KB. +# +# $1: Region name +partial_write_test() +{ + local opts="--fast-verify" + local secondary_opts="" # for secondary programmer + local region_name="$1" + local filename="" + local test_num=0 + local prev_test_num=0 + + if [ $REGION_MODE -ne $REGION_MODE_FLASHMAP ]; then + opts="$opts --ignore-fmap" + fi + + if [ $TEST_TYPE -eq $TEST_TYPE_SINGLE ]; then + if [ $REGION_MODE -eq $REGION_MODE_LAYOUT ]; then + opts="$opts -l $LAYOUT_FILE" + secondary_opts="$opts" + elif [ $REGION_MODE -eq $REGION_MODE_CLOBBER ]; then + printf "000000:%06x RW\n" $(($CHIP_SIZE - 1)) > "${LOCAL_TMPDIR}/clobber_mode_layout.txt" + if [ $DO_REMOTE -eq 1 ]; then + copy_to_remote "clobber_mode_layout.txt" + fi + secondary_opts="$opts -l ${LOCAL_TMPDIR}/clobber_mode_layout.txt" + opts="$opts -l ${TMPDIR}/clobber_mode_layout.txt" + fi + fi + + if [ $SMALL_REGION -eq 1 ]; then + PARTIAL_WRITE_TEST_ALIGN_SIZE_KB=16 + else + PARTIAL_WRITE_TEST_ALIGN_SIZE_KB=256 + fi + + # FIXME: Add sanity checks. + + print_and_log "Doing region-based partial write test on region "$region_name"\n" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS $opts -r -i ${region_name}:${TMPDIR}/${region_name}.bin" "read_region_${region_name}" + if [ $DO_REMOTE -eq 1 ]; then + copy_from_remote "${region_name}.bin" + fi + + PARTIAL_WRITE_TEST_REGION_SIZE=$(stat --format=%s ${LOCAL_TMPDIR}/${region_name}.bin) + if [ $PARTIAL_WRITE_TEST_REGION_SIZE -lt $(($PARTIAL_WRITE_TEST_ALIGN_SIZE_KB * $K)) ]; then + print_and_log "Region $region_name is too small\n" + return $EXIT_FAILURE + fi + + if [ $(($PARTIAL_WRITE_TEST_REGION_SIZE % $(($PARTIAL_WRITE_TEST_ALIGN_SIZE_KB)))) -ne 0 ]; then + print_and_log "Region $region_name is not aligned to $PARTIAL_WRITE_TEST_ALIGN_SIZE_KB\n" + return $EXIT_FAILURE + fi + + # Test procedure: + # Clobber region with random content first. Then do writes using the + # following sequences for each 128KB: + # 0-2K : 0x00 (\000) Partial 4KB sector, lower half + # 2K-6K : 0x11 (\021) Crossover 4KB sector boundary + # 6K-8K : 0x22 (\042) Partial 4KB sector, upper half + # 8K-16K : 0x33 (\063) Full 4KB sectors + # + # Repeat the above sequence for 64KB-aligned sizes + # 0-32K : 0x44 (\104) Partial 64KB block, lower half + # 32K-96K : 0x55 (\125) Crossover 64KB block boundary + # 96K-128K : 0x66 (\146) Partial 64KB block, upper half + # 128K-256K : 0x77 (\167) Full 64KB blocks + + test_num=0 + dd if=/dev/urandom of="${LOCAL_TMPDIR}/random_4k_test.bin" bs=4k count=$(($PARTIAL_WRITE_TEST_REGION_SIZE / $((4 * $K)))) 2>/dev/null + + # 0-2K : 0x00 (\000) Partial 4KB sector, lower half + partial_write_test_helper "4k_test_${test_num}" 0 2 "0x00" + prev_test_num=$test_num + test_num=$(($test_num + 1)) + + # 2K-6K : 0x11 (\021) Crossover 4KB sector boundary + partial_write_test_helper "4k_test_${test_num}" 2 4 "0x11" + test_num=$(($test_num + 1)) + + # 6K-8K : 0x22 (\042) Partial 4KB sector, upper half + partial_write_test_helper "4k_test_${test_num}" 6 2 "0x22" + test_num=$(($test_num + 1)) + + # 8K-16K : 0x33 (\063) Full 4KB sectors + partial_write_test_helper "4k_test_${test_num}" 8 8 "0x33" + + for F in ${LOCAL_TMPDIR}/random_4k_test.bin ${LOCAL_TMPDIR}/4k_test_*.bin ; do + filename=$(basename $F) + if [ $DO_REMOTE -eq 1 ]; then + copy_to_remote $filename + fi + + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS $opts -w -i ${region_name}:${TMPDIR}/${filename}" "write_${filename}" + if [ $? -ne 0 ]; then + test_fail "Failed to write $filename to $region_name" + fi + + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS $opts -v -i ${region_name}:${TMPDIR}/${filename}" "verify_${filename}" + if [ $? -ne 0 ]; then + test_fail "Failed to verify write of $filename to $region_name" + fi + + if [ -n "$SECONDARY_OPTS" ]; then + flashrom_log_scmd $LOCAL "$LOCAL_FLASHROM $SECONDARY_OPTS $secondary_opts -v -i ${region_name}:${LOCAL_TMPDIR}/${filename}" "verify_secondary_${filename}" + if [ $? -ne 0 ]; then + test_fail "Failed to verify write of $filename to $region_name using secondary programmer" + fi + fi + + print_and_log "\tWrote $filename to $region_name region successfully.\n" + done + + if [ $SMALL_REGION -eq 1 ]; then + return $EXIT_SUCCESS + fi + + # + # Second half: Tests for 64KB chunks + # + test_num=0 + dd if=/dev/urandom of="${LOCAL_TMPDIR}/random_64k_test.bin" bs=128k count=$(($PARTIAL_WRITE_TEST_REGION_SIZE / $((128*$K)))) 2>/dev/null + + # 0-32K : 0x44 (\104) Partial 64KB block, lower half + partial_write_test_helper "64k_test_${test_num}" 0 32 "0x44" + prev_test_num=$test_num + test_num=$(($test_num + 1)) + + # 32K-96K : 0x55 (\125) Crossover 64KB block boundary + partial_write_test_helper "64k_test_${test_num}" 32 64 "0x55" + test_num=$(($test_num + 1)) + + # 96K-128K : 0x66 (\146) Partial 64KB block, upper half + partial_write_test_helper "64k_test_${test_num}" 96 32 "0x66" + test_num=$(($test_num + 1)) + + # 128K-256K : 0x77 (\167) Full 64KB blocks + partial_write_test_helper "64k_test_${test_num}" 128 128 "0x77" + + for F in ${LOCAL_TMPDIR}/random_64k_test.bin ${LOCAL_TMPDIR}/64k_test_*.bin ; do + filename=$(basename $F) + if [ $DO_REMOTE -eq 1 ]; then + copy_to_remote $filename + fi + + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS $opts -w -i ${region_name}:${TMPDIR}/${filename}" "write_${filename}" + if [ $? -ne 0 ]; then + test_fail "Failed to write $filename to $region_name" + fi + + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS $opts -v -i ${region_name}:${TMPDIR}/${filename}" "verify_${filename}" + if [ $? -ne 0 ]; then + test_fail "Failed to verify write of $filename to $region_name" + fi + + if [ -n "$SECONDARY_OPTS" ]; then + flashrom_log_scmd $LOCAL "$LOCAL_FLASHROM $SECONDARY_OPTS $secondary_opts -v -i ${region_name}:${LOCAL_TMPDIR}/${filename}" "verify_secondary_${filename}" + if [ $? -ne 0 ]; then + test_fail "Failed to verify write of $filename to $region_name using secondary programmer" + fi + fi + + print_and_log "\tWrote $filename to $region_name region successfully.\n" + done + + return $EXIT_SUCCESS +} + +# Before anything else, check to see if Flashrom can succesfully probe +# for and find the flash chips. If not, we will abort. +flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS" "verify_probe" +if [ $? -ne 0 ]; then + test_fail "Failed to find flash chips while probing, aborting." +fi + +# Read ROM twice to test for consistency. +if [ $SKIP_CONSISTENCY_CHECK -eq 0 ]; then + double_read_test 0 $CHIP_SIZE +fi + +if [ $TEST_TYPE -eq $TEST_TYPE_SINGLE ]; then + if [ $REGION_MODE -eq $REGION_MODE_CLOBBER ]; then + random_file="${TMPDIR}/random_${CHIP_SIZE_KB}K.bin" + cmp_file="${TMPDIR}/cmp.bin" + + scmd $DO_REMOTE "dd if=/dev/urandom of=${random_file} bs=1k count=${CHIP_SIZE_KB}" + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -w $random_file" "clobber_write" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -r $cmp_file" "clobber_verify" + scmd $DO_REMOTE "cmp $random_file $cmp_file" + if [ $? -ne 0 ]; then + write_backup_image + test_fail "Failed to clobber entire ROM." + fi + scmd $DO_REMOTE "rm -f $cmp_file $random_file" + + partial_write_test "RW" + if [ $? -ne 0 ]; then + print_and_log "Layout mode test failed\n" + RC=$EXIT_FAILURE + fi + elif [ $REGION_MODE -eq $REGION_MODE_DESCRIPTOR ]; then + # FIXME: This depends on descriptor regions being translated into internal + # layout representation automatically so we can target them using -i. + print_and_log "TODO: Descriptor mode\n" + exit $EXIT_FAILURE + elif [ $REGION_MODE -eq $REGION_MODE_FLASHMAP ]; then + partial_write_test "$FLASHMAP_REGION" 0 + if [ $? -ne 0 ]; then + print_and_log "Flashmap mode test failed\n" + RC=$EXIT_FAILURE + fi + elif [ $REGION_MODE -eq $REGION_MODE_LAYOUT ]; then + rw_layout="" + addr="" + end="" + size="" + size_kb="" + + # Look for a region name with any amount of leading whitespace + # and no trailing whitespace or characters. + rw_layout=$(grep "\s${LAYOUT_REGION}$" "${LOCAL_TMPDIR}/$(basename $LAYOUT_FILE)" | head -n 1) + if [ -z "$rw_layout" ]; then + print_and_log "No region matching "${LAYOUT_REGION}" found layout file "${LAYOUT_FILE}"\n" + test_fail "" + fi + + addr="0x$(echo "$rw_layout" | cut -d ' ' -f -1 | awk -F ':' '{ print $1 }')" + end="0x$(echo "$rw_layout" | cut -d ' ' -f -1 | awk -F ':' '{ print $2 }')" + size="$(($end - $addr + 1))" + size_kb="$(($size / $K))" + + print_and_log ""$LAYOUT_REGION" region address: ${addr}, size: $size_kb KiB\n" + partial_write_test "$LAYOUT_REGION" + if [ $? -ne 0 ]; then + print_and_log "Layout mode test failed\n" + RC=$EXIT_FAILURE + fi + fi +elif [ $TEST_TYPE -eq $TEST_TYPE_ENDURANCE ]; then + iteration=1 + terminate=0 + random_file="${TMPDIR}/random_${CHIP_SIZE_KB}K.bin" + cmp_file="${TMPDIR}/cmp.bin" + # TODO: We can measure how long the tests take on average, throughput, etc. + # i.e. { time $NEW_FLASHROM $PRIMARY_OPTS -w $random_file ; } 2>&1 | grep user | cut -f2 + + # For this test we want to run clobber mode until failure + while [ $terminate -eq 0 ] + do + print_and_log "Running iteration #${iteration}\n" + + scmd $DO_REMOTE "dd if=/dev/urandom of=${random_file} bs=1k count=${CHIP_SIZE_KB}" + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -w $random_file" "endurance_write_${iteration}" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -r $cmp_file" "endurance_verify_${iteration}" + scmd $DO_REMOTE "cmp $random_file $cmp_file" + if [ $? -ne 0 ]; then + terminate=1 + fi + scmd $DO_REMOTE "rm -f $cmp_file $random_file" + + iteration=$(($iteration + 1)) + done + + # TODO: Determine what to return for the endurance test exit status + # i.e. what constitutes a test pass and what constitutes a test fail? + print_and_log "Failed on iteration $iteration\n" + # TODO - Print performance metrics? +elif [ $TEST_TYPE -eq $TEST_TYPE_WRITEPROTECT ]; then + random_file_protect="${TMPDIR}/random_${CHIP_SIZE_KB}K_protect.bin" + random_file_clobber1="${TMPDIR}/random_${CHIP_SIZE_KB}K_clobber1.bin" + random_file_clobber2="${TMPDIR}/random_${CHIP_SIZE_KB}K_clobber2.bin" + cmp_file="${TMPDIR}/cmp.bin" + + # generate random files + scmd $DO_REMOTE "dd if=/dev/urandom of=$random_file_protect bs=1k count=${CHIP_SIZE_KB}" + scmd $DO_REMOTE "dd if=/dev/urandom of=$random_file_clobber1 bs=1k count=${CHIP_SIZE_KB}" + scmd $DO_REMOTE "dd if=/dev/urandom of=$random_file_clobber2 bs=1k count=${CHIP_SIZE_KB}" + + save_wp_state + set_wp_state $WP_DISABLE 0 0 + + # clobber ROM with an initial file + print_and_log "Clobbering ROM with random initial content\n" + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -w $random_file_protect" "writeprotect_initial_write" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -r $cmp_file" "writeprotect_initial_verify" + scmd $DO_REMOTE "cmp $random_file_protect $cmp_file" + if [ $? -ne 0 ]; then + wp_test_fail "Failed to clobber ROM initially." + fi + scmd $DO_REMOTE "rm -f $cmp_file" + + # Protect lower half of ROM, then try clobbering. + print_and_log "Starting lower half test\n" + set_wp_state $WP_ENABLE 0 $CHIP_SIZE_HALF + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -n -w $random_file_clobber1" "writeprotect_enable_lower_write" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -r $cmp_file" "writeprotect_enable_lower_verify" + scmd $DO_REMOTE "cmp --bytes=$CHIP_SIZE_HALF $random_file_protect $cmp_file" + if [ $? -ne 0 ]; then + wp_test_fail "Failed to protect lower half of ROM - exiting writeprotect test." + fi + scmd $DO_REMOTE "cmp --ignore-initial=$CHIP_SIZE_HALF --bytes=$CHIP_SIZE_HALF $random_file_clobber1 $cmp_file" + if [ $? -ne 0 ]; then + wp_test_fail "Failed to clobber upper half of ROM - exiting writeprotect test." + fi + scmd $DO_REMOTE "rm -f $cmp_file" + + # Protect upper half of ROM, then try clobbering. + print_and_log "Starting upper half test\n" + set_wp_state $WP_ENABLE $CHIP_SIZE_HALF $CHIP_SIZE_HALF + flashrom_log_scmd $DO_REMOTE "$NEW_FLASHROM $PRIMARY_OPTS -n -w $random_file_clobber2" "writeprotect_enable_upper_write" + flashrom_log_scmd $DO_REMOTE "$OLD_FLASHROM $PRIMARY_OPTS -r $cmp_file" "writeprotect_enable_upper_verify" + scmd $DO_REMOTE "cmp --bytes=$CHIP_SIZE_HALF $random_file_clobber2 $cmp_file" + if [ $? -ne 0 ]; then + wp_test_fail "Failed to clobber lower half of ROM - exiting writeprotect test." + fi + scmd $DO_REMOTE "cmp --ignore-initial=$CHIP_SIZE_HALF --bytes=$CHIP_SIZE_HALF $random_file_clobber1 $cmp_file" + if [ $? -ne 0 ]; then + wp_test_fail "Failed to protect upper half of ROM - exiting writeprotect test." + fi + scmd $DO_REMOTE "rm -f $cmp_file" + + set_wp_state $WP_DISABLE 0 0 # completely disable wp so we can write the backup +fi + +# restore and cleanup +write_backup_image +if [ $TEST_TYPE -eq $TEST_TYPE_WRITEPROTECT ]; then + restore_wp_state # restore the fw and sw writeprotect states to the initial saved states. +fi + +if [ $RC -eq 0 ]; then + print_and_log "Test status: PASS\n" +else + print_and_log "Test status: FAIL\n" +fi +do_cleanup + +exit $RC
-
David Hendricks (Code Review)