[S] Change in flashrom[1.3.x]: flashchips.c: Add 4BA write to XM25Qx256C

[Felix Singer (Code Review)]

Felix Singer has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/70204 )

Change subject: flashchips.c: Add 4BA write to XM25Qx256C
......................................................................

flashchips.c: Add 4BA write to XM25Qx256C

Flash chips XM25QH256C and XM25QU256C support the 4-byte program
command (0x12) according to their datasheets, but the feature flag is
not enabled in flashchips.c, so enable it to allow this feature to be
used.

TICKET: https://ticket.coreboot.org/issues/371

BUG=b:259493706
TEST=build

Original-Signed-off-by: Liam Flaherty 
Original-Reviewed-on: https://review.coreboot.org/c/flashrom/+/69713
Original-Reviewed-by: Felix Singer 
Original-Tested-by: build bot (Jenkins) 
Original-Reviewed-by: Anastasia Klimchuk

Change-Id: I96c80762fcda2af6028c7a53d8c545b0c6565cbd
Signed-off-by: Felix Singer 
---
M flashchips.c
1 file changed, 29 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/04/70204/1

diff --git a/flashchips.c b/flashchips.c
index 6fc3a84..76f3fbb 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -19807,7 +19807,7 @@
    	/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
    	.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN |
    			  FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ |
-				  FEATURE_WRSR2,
+				  FEATURE_4BA_WRITE | FEATURE_WRSR2,
    	.tested		= TEST_UNTESTED,
    	.probe		= PROBE_SPI_RDID,
    	.probe_timing	= TIMING_ZERO,
@@ -19856,7 +19856,8 @@
    	/* supports SFDP */
    	/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
    	.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
-			| FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
+			| FEATURE_4BA_EAR_C5C8 | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ
+			| FEATURE_4BA_WRITE,
    	.tested		= TEST_UNTESTED,
    	.probe		= PROBE_SPI_RDID,
    	.probe_timing	= TIMING_ZERO,