Change in flashrom[master]: flashrom.8: carve out `csgpiol` into its own section

[Nico Huber (Code Review)]

Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/57893 )

Change subject: flashrom.8: carve out `csgpiol` into its own section
......................................................................

flashrom.8: carve out `csgpiol` into its own section

Documentation for `csgpiol` was put into the generic programmer options
section. Move it to its own section.

Change-Id: Ic7379331d36b3068eacde5a983b4ccb3afc56c51
Signed-off-by: Michael Niewöhner 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/57893
Tested-by: build bot (Jenkins) 
Reviewed-by: Nico Huber 
Reviewed-by: Angel Pons 
---
M flashrom.8.tmpl
1 file changed, 11 insertions(+), 6 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Nico Huber: Looks good to me, approved
  Angel Pons: Looks good to me, but someone else must approve

diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 788e254..de93453 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -840,9 +840,9 @@
 Flyswatter/Flyswatter 2.
 .sp
 An optional parameter specifies the controller
-type, channel/interface/port and GPIO-based chip select it should support. For that you have to use the
+type, channel/interface/port it should support. For that you have to use the
 .sp
-.B "  flashrom -p ft2232_spi:type=model,port=interface,csgpiol=gpio"
+.B "  flashrom -p ft2232_spi:type=model,port=interface"
 .sp
 syntax where
 .B model
@@ -853,10 +853,7 @@
 " or " google-servo-v2-legacy
 .B interface
 can be
-.BR A ", " B ", " C ", or " D
-and
-.B csgpiol
-can be a number between 0 and 3, denoting GPIOL0-GPIOL3 correspondingly.
+.BR A ", " B ", " C ", or " D .
 The default model is
 .B 4232H
 the default interface is
@@ -884,6 +881,14 @@
 .B "  flashrom -p ft2232_spi:divisor=div"
 .sp
 syntax.
+.sp
+Using the parameter
+.B csgpiol
+an additional CS# pin can be chosen, where the value can be a number between 0 and 3, denoting GPIOL0-GPIOL3
+correspondingly. Example:
+.sp
+.B "  flashrom -p ft2232_spi:csgpiol=3"
+.sp
 .SS
 .BR "serprog " programmer
 .IP