Change in flashrom[master]: realtek_mst_i2c_spi.c: Rename `PAGE_SIZE` macro

[Angel Pons (Code Review)]

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/53998 )

Change subject: realtek_mst_i2c_spi.c: Rename `PAGE_SIZE` macro
......................................................................

realtek_mst_i2c_spi.c: Rename `PAGE_SIZE` macro

This fixes building with musl libc on alpine:amd64-v3.9.

Change-Id: I043e3d8c2d2498e94b5e7577a7378c8c3e0e6c81
Signed-off-by: Angel Pons 
---
M realtek_mst_i2c_spi.c
1 file changed, 9 insertions(+), 9 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/98/53998/1

diff --git a/realtek_mst_i2c_spi.c b/realtek_mst_i2c_spi.c
index 64579e1..1b8ef72 100644
--- a/realtek_mst_i2c_spi.c
+++ b/realtek_mst_i2c_spi.c
@@ -28,7 +28,7 @@

#define MCU_I2C_SLAVE_ADDR	0x94
 #define REGISTER_ADDRESS	(0x94 >> 1)
-#define PAGE_SIZE		128
+#define REALTEK_PAGE_SIZE	128
 #define MAX_SPI_WAIT_RETRIES	1000

#define MCU_MODE 0x6F
@@ -310,8 +310,8 @@
     * Using static buffer with maximum possible size,
     * extra byte is needed for prefixing the data port register at index 0.
     */
-	uint8_t wbuf[PAGE_SIZE + 1] = { MCU_DATA_PORT };
-	if (len > PAGE_SIZE)
+	uint8_t wbuf[REALTEK_PAGE_SIZE + 1] = { MCU_DATA_PORT };
+	if (len > REALTEK_PAGE_SIZE)
    	return SPI_GENERIC_ERROR;

memcpy(&wbuf[1], buf, len);
@@ -352,9 +352,9 @@
    uint8_t dummy;
    realtek_mst_i2c_spi_read_register(fd, MCU_DATA_PORT, &dummy);

-	for (i = 0; i < len; i += PAGE_SIZE) {
+	for (i = 0; i < len; i += REALTEK_PAGE_SIZE) {
    	ret |= realtek_mst_i2c_spi_read_data(fd, REGISTER_ADDRESS,
-				buf + i, min(len - i, PAGE_SIZE));
+				buf + i, min(len - i, REALTEK_PAGE_SIZE));
    	if (ret)
    		return ret;
    }
@@ -376,11 +376,11 @@
    	return SPI_GENERIC_ERROR;

ret |= realtek_mst_i2c_spi_write_register(fd, 0x6D, 0x02); /* write opcode */
-	ret |= realtek_mst_i2c_spi_write_register(fd, 0x71, (PAGE_SIZE - 1)); /* fit len=256 */
+	ret |= realtek_mst_i2c_spi_write_register(fd, 0x71, (REALTEK_PAGE_SIZE - 1)); /* fit len=256 */

-	for (i = 0; i < len; i += PAGE_SIZE) {
-		uint16_t page_len = min(len - i, PAGE_SIZE);
-		if (len - i < PAGE_SIZE)
+	for (i = 0; i < len; i += REALTEK_PAGE_SIZE) {
+		uint16_t page_len = min(len - i, REALTEK_PAGE_SIZE);
+		if (len - i < REALTEK_PAGE_SIZE)
    		ret |= realtek_mst_i2c_spi_write_register(fd, 0x71, page_len-1);
    	ret |= realtek_mst_i2c_spi_map_page(fd, start + i);
    	if (ret)