[S] Change in flashrom[main]: Add Glasgow to supported serprog programmers documentation

[Anastasia Klimchuk (Code Review)]

Attention is currently required from: [e-mail].

Anastasia Klimchuk has posted comments on this change by [e-mail]. ( https://review.coreboot.org/c/flashrom/+/85527?usp=email )

Change subject: Add Glasgow to supported serprog programmers documentation
......................................................................

Patch Set 1:

(5 comments)

Patchset:

PS1: 
Cattus, thank you for the contribution, and nice to meet you.

I read your post, I like it so much, very detailed information, it's just great!

- I held my breath when I read that the chip was not recognised... But then I kept reading and there was a happy ending at the end :)

- Somewhere in the middle there was a link on how to "write a mapping for flashrom", just wanted to say we also have a doc on this https://flashrom.org/contrib_howtos/how_to_add_new_chip.html.
We did split a giant flashchips.c into a per-vendor file recently.

- If you want you can try to enable write-protection capability for the chip: because you have the datasheet and the actual chip. There is a section about it in the doc: https://flashrom.org/contrib_howtos/how_to_add_new_chip.html#write-protectio....
For the examples, look for the chip definitions that have test status TEST_OK_PREWB

Commit Message:

https://review.coreboot.org/c/flashrom/+/85527/comment/1e9bc633_fd397b83?usp... :
PS1, Line 10: the project wouldnt compile with meson for me (MacOS 15.1)
I first thought that flashrom does not compile, but then I read your blog post and now I think maybe that's the documentation did not compile?

I downloaded your patch and built with documentation, and so I added two comments (as you see below).

https://review.coreboot.org/c/flashrom/+/85527/comment/18e71279_d6bdcb84?usp... :
PS1, Line 9: Updated the serprog overview page with info about the Glasgow Interface Explorer as a valid programmer.
           : Wasnt able to test as the project wouldnt compile with meson for me (MacOS 15.1)
           : but tried to make it as similar as possible to what was already there.
We wrap commit message by 72 chars, and I think the first line is longer (maybe the second one too)

https://flashrom.org/dev_guide/development_guide.html#commit-message-1

File doc/supported_hw/supported_prog/serprog/overview.rst:

https://review.coreboot.org/c/flashrom/+/85527/comment/80bf589f_616b08ef?usp... :
PS1, Line 105: Source for the Glasgow Project can be found `here https://github.com/GlasgowEmbedded/glasgow`_
This gives a warning `WARNING: Duplicate explicit target name: "here".`

So maybe you can change slightly, for example 
Here is the <source for the Glasgow Project> (in <> brackets would be the link text)

https://review.coreboot.org/c/flashrom/+/85527/comment/edef2f8e_6a300892?usp... :
PS1, Line 108: 76hPuPkpDOTAxj7TegVqV8UkmKEjZ8TvLLBoDoVPpw
What is this hash? :) I assume that's by mistake?