Change in flashrom[staging]: Initial MX25L25635F support

[Nico Huber (Code Review)]

Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/19855 )

Change subject: Initial MX25L25635F support
......................................................................

Initial MX25L25635F support

Change-Id: I292e12d92cdf3961b8d47492a1d5679ff1ea21ce
Signed-off-by: Timothy Pearson 
Reviewed-on: https://review.coreboot.org/19855
Tested-by: build bot (Jenkins) 
Reviewed-by: David Hendricks 
---
M flashchips.c
1 file changed, 47 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  David Hendricks: Looks good to me, approved

diff --git a/flashchips.c b/flashchips.c
index 742cc6e..294fae1 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -8045,6 +8045,53 @@

{
    	.vendor		= "Macronix",
+		.name		= "MX25L25635F/MX25L25645E/MX25L25665E",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= MACRONIX_ID,
+		.model_id	= MACRONIX_MX25L25635F,
+		.total_size	= 32768,
+		.page_size	= 256,
+		/* OTP: 512B total; enter 0xB1, exit 0xC1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_SUPPORT,
+		.four_bytes_addr_funcs =
+		{
+			.set_4ba = spi_enter_4ba_b7, /* enter 4-bytes addressing mode by CMD B7 */
+			.read_nbyte = spi_nbyte_read_4ba,  /* read from 4-bytes addressing mode */
+			.program_byte = spi_byte_program_4ba, /* write from 4-bytes addressing mode */
+			.program_nbyte = spi_nbyte_program_4ba /* write from 4-bytes addressing mode */
+		},
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 8192} },
+				.block_erase = spi_block_erase_20_4ba,
+			}, {
+				.eraseblocks = { {32 * 1024, 1024} },
+				.block_erase = spi_block_erase_52_4ba,
+			}, {
+				.eraseblocks = { {64 * 1024, 512} },
+				.block_erase = spi_block_erase_d8_4ba,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {32 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		/* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B) supported */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Macronix",
    	.name		= "MX25U1635E",
    	.bustype	= BUS_SPI,
    	.manufacture_id	= MACRONIX_ID,