Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/flashrom/+/63104 )
Change subject: flashrom.8.tmpl: document lspcon_i2c_spi ......................................................................
flashrom.8.tmpl: document lspcon_i2c_spi
This programmer operates much the same as realtek_mst_i2c_spi, so the I2C options are moved to a new section describing both programmers and a short description is added for this programmer itself.
Signed-off-by: Peter Marheine pmarheine@chromium.org Change-Id: I9ccb9694fdea29e68f062cc049efc0204917a139 Reviewed-on: https://review.coreboot.org/c/flashrom/+/63104 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Edward O'Callaghan quasisec@chromium.org Reviewed-by: Nikolai Artemiev nartemiev@google.com --- M flashrom.8.tmpl 1 file changed, 22 insertions(+), 11 deletions(-)
Approvals: build bot (Jenkins): Verified Edward O'Callaghan: Looks good to me, approved Nikolai Artemiev: Looks good to me, but someone else must approve
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 92dff68..bf8960f 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -395,6 +395,8 @@ .sp .BR "* realtek_mst_i2c_spi" " (for SPI flash ROMs attached to Realtek DisplayPort hubs accessible through I2C)" .sp +.BR "* lspcon_i2c_spi" " (for SPI flash ROMs attached to Parade Technologies LSPCONs)" +.sp Some programmers have optional or mandatory parameters which are described in detail in the .B PROGRAMMER-SPECIFIC INFORMATION @@ -1417,21 +1419,25 @@ If the passed frequency is not supported by the adapter the nearest lower supported frequency will be used. .SS -.BR "realtek_mst_i2c_spi " programmer +.BR "realtek_mst_i2c_spi " and " lspcon_i2c_spi " programmers .IP -This programmer supports SPI flash programming for chips attached to Realtek -DisplayPort MST hubs, themselves accessed through I2C (tunneling SPI flash -commands through the MST hub's I2C connection with the host). - -The I2C bus on which the hub is reachable must be specified by either a device -path with the \fBdevpath\fP option: +These programmers tunnel SPI commands through I2C-connected devices. The I2C +bus over which communication occurs must be specified either by device path +with the \fBdevpath\fP option: .sp .B " flashrom -p realtek_mst_i2c_spi:devpath=/dev/i2c-8" .sp or by a bus number with the \fBbus\fP option, which implies a device path like /dev/i2c-N where N is the specified bus number: .sp -.B " flashrom -p realtek_mst_i2c_spi:bus=8" +.B " flashrom -p lspcon_i2c_spi:bus=8" + +.SS +.BR "realtek_mst_i2c_spi " programmer +.IP +This programmer supports SPI flash programming for chips attached to Realtek +DisplayPort MST hubs, themselves accessed through I2C (tunneling SPI flash +commands through the MST hub's I2C connection with the host). .TP .B In-system programming (ISP) mode .sp @@ -1456,7 +1462,12 @@ .B " flashrom -p realtek_mst_i2c_spi:bus=0,enter-isp=1,reset-mcu=0 -E" .br .B " flashrom -p realtek_mst_i2c_spi:bus=0,enter-isp=0,reset-mcu=1 -w new.bin" -.sp +.SS +.BR "lspcon_i2c_spi " programmer +.IP +This programmer supports SPI flash programming for chips attached to Parade +Technologies DisplayPort-to-HDMI level shifter/protocol converters (LSPCONs). +Communication to the SPI flash is tunneled through the LSPCON over I2C.
.SH EXAMPLES To back up and update your BIOS, run @@ -1535,8 +1546,8 @@ .B ogp needs PCI configuration space read access and raw memory access. .sp -.B realtek_mst_i2c_spi -needs userspace access to the selected I2C bus. +.BR realtek_mst_i2c_spi " and " lspcon_i2c_spi +need userspace access to the selected I2C bus. .sp On OpenBSD, you can obtain raw access permission by setting .B "securelevel=-1"
1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one.