Nico Huber has submitted this change. ( https://review.coreboot.org/c/flashrom/+/52944 )
Change subject: programmer_table: move array content to an own file ......................................................................
programmer_table: move array content to an own file
Change-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b Signed-off-by: Thomas Heijligen thomas.heijligen@secunet.de Reviewed-on: https://review.coreboot.org/c/flashrom/+/52944 Reviewed-by: Nico Huber nico.h@gmx.de Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M Makefile M flashrom.c M meson.build A programmer_table.c 4 files changed, 495 insertions(+), 479 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved
diff --git a/Makefile b/Makefile index b8b40ca..4eb4191 100644 --- a/Makefile +++ b/Makefile @@ -633,7 +633,7 @@ ############################################################################### # Library code.
-LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o fmap.o +LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o programmer_table.o helpers.o ich_descriptors.o fmap.o
############################################################################### # Frontend related stuff. diff --git a/flashrom.c b/flashrom.c index 43a5599..9cd1003 100644 --- a/flashrom.c +++ b/flashrom.c @@ -58,484 +58,6 @@ /* Is writing allowed with this programmer? */ int programmer_may_write;
-const struct programmer_entry programmer_table[] = { -#if CONFIG_INTERNAL == 1 - { - .name = "internal", - .type = OTHER, - .devs.note = NULL, - .init = internal_init, - .map_flash_region = physmap, - .unmap_flash_region = physunmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DUMMY == 1 - { - .name = "dummy", - .type = OTHER, - /* FIXME */ - .devs.note = "Dummy device, does nothing and logs all accesses\n", - .init = dummy_init, - .map_flash_region = dummy_map, - .unmap_flash_region = dummy_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_MEC1308 == 1 - { - .name = "mec1308", - .type = OTHER, - .devs.note = "Microchip MEC1308 Embedded Controller.\n", - .init = mec1308_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NIC3COM == 1 - { - .name = "nic3com", - .type = PCI, - .devs.dev = nics_3com, - .init = nic3com_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICREALTEK == 1 - { - /* This programmer works for Realtek RTL8139 and SMC 1211. */ - .name = "nicrealtek", - .type = PCI, - .devs.dev = nics_realtek, - .init = nicrealtek_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICNATSEMI == 1 - { - .name = "nicnatsemi", - .type = PCI, - .devs.dev = nics_natsemi, - .init = nicnatsemi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_GFXNVIDIA == 1 - { - .name = "gfxnvidia", - .type = PCI, - .devs.dev = gfx_nvidia, - .init = gfxnvidia_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_RAIDEN_DEBUG_SPI == 1 - { - .name = "raiden_debug_spi", - .type = USB, - .devs.dev = devs_raiden, - .init = raiden_debug_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DRKAISER == 1 - { - .name = "drkaiser", - .type = PCI, - .devs.dev = drkaiser_pcidev, - .init = drkaiser_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_SATASII == 1 - { - .name = "satasii", - .type = PCI, - .devs.dev = satas_sii, - .init = satasii_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ATAHPT == 1 - { - .name = "atahpt", - .type = PCI, - .devs.dev = ata_hpt, - .init = atahpt_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ATAVIA == 1 - { - .name = "atavia", - .type = PCI, - .devs.dev = ata_via, - .init = atavia_init, - .map_flash_region = atavia_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ATAPROMISE == 1 - { - .name = "atapromise", - .type = PCI, - .devs.dev = ata_promise, - .init = atapromise_init, - .map_flash_region = atapromise_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_IT8212 == 1 - { - .name = "it8212", - .type = PCI, - .devs.dev = devs_it8212, - .init = it8212_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_FT2232_SPI == 1 - { - .name = "ft2232_spi", - .type = USB, - .devs.dev = devs_ft2232spi, - .init = ft2232_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_SERPROG == 1 - { - .name = "serprog", - .type = OTHER, - /* FIXME */ - .devs.note = "All programmer devices speaking the serprog protocol\n", - .init = serprog_init, - .map_flash_region = serprog_map, - .unmap_flash_region = fallback_unmap, - .delay = serprog_delay, - }, -#endif - -#if CONFIG_BUSPIRATE_SPI == 1 - { - .name = "buspirate_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Dangerous Prototypes Bus Pirate\n", - .init = buspirate_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DEDIPROG == 1 - { - .name = "dediprog", - .type = USB, - .devs.dev = devs_dediprog, - .init = dediprog_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_DEVELOPERBOX_SPI == 1 - { - .name = "developerbox", - .type = USB, - .devs.dev = devs_developerbox_spi, - .init = developerbox_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_ENE_LPC == 1 - { - .name = "ene_lpc", - .type = OTHER, - .devs.note = "ENE LPC interface keyboard controller\n", - .init = ene_lpc_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_RAYER_SPI == 1 - { - .name = "rayer_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "RayeR parallel port programmer\n", - .init = rayer_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_PONY_SPI == 1 - { - .name = "pony_spi", - .type = OTHER, - /* FIXME */ - .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n", - .init = pony_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICINTEL == 1 - { - .name = "nicintel", - .type = PCI, - .devs.dev = nics_intel, - .init = nicintel_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICINTEL_SPI == 1 - { - .name = "nicintel_spi", - .type = PCI, - .devs.dev = nics_intel_spi, - .init = nicintel_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NICINTEL_EEPROM == 1 - { - .name = "nicintel_eeprom", - .type = PCI, - .devs.dev = nics_intel_ee, - .init = nicintel_ee_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_OGP_SPI == 1 - { - .name = "ogp_spi", - .type = PCI, - .devs.dev = ogp_spi, - .init = ogp_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_SATAMV == 1 - { - .name = "satamv", - .type = PCI, - .devs.dev = satas_mv, - .init = satamv_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_LINUX_MTD == 1 - { - .name = "linux_mtd", - .type = OTHER, - .devs.note = "Device files /dev/mtd*\n", - .init = linux_mtd_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_LINUX_SPI == 1 - { - .name = "linux_spi", - .type = OTHER, - .devs.note = "Device files /dev/spidev*.*\n", - .init = linux_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_LSPCON_I2C_SPI == 1 - { - .name = "lspcon_i2c_spi", - .type = OTHER, - .devs.note = "Device files /dev/i2c-*.\n", - .init = lspcon_i2c_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_REALTEK_MST_I2C_SPI == 1 - { - .name = "realtek_mst_i2c_spi", - .type = OTHER, - .devs.note = "Device files /dev/i2c-*.\n", - .init = realtek_mst_i2c_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_USBBLASTER_SPI == 1 - { - .name = "usbblaster_spi", - .type = USB, - .devs.dev = devs_usbblasterspi, - .init = usbblaster_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_MSTARDDC_SPI == 1 - { - .name = "mstarddc_spi", - .type = OTHER, - .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n", - .init = mstarddc_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_PICKIT2_SPI == 1 - { - .name = "pickit2_spi", - .type = USB, - .devs.dev = devs_pickit2_spi, - .init = pickit2_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_CH341A_SPI == 1 - { - .name = "ch341a_spi", - .type = USB, - .devs.dev = devs_ch341a_spi, - .init = ch341a_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = ch341a_spi_delay, - }, -#endif - -#if CONFIG_DIGILENT_SPI == 1 - { - .name = "digilent_spi", - .type = USB, - .devs.dev = devs_digilent_spi, - .init = digilent_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_JLINK_SPI == 1 - { - .name = "jlink_spi", - .type = OTHER, - .init = jlink_spi_init, - .devs.note = "SEGGER J-Link and compatible devices\n", - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_NI845X_SPI == 1 - { - .name = "ni845x_spi", - .type = OTHER, // choose other because NI-845x uses own USB implementation - .devs.note = "National Instruments USB-845x\n", - .init = ni845x_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif - -#if CONFIG_STLINKV3_SPI == 1 - { - .name = "stlinkv3_spi", - .type = USB, - .devs.dev = devs_stlinkv3_spi, - .init = stlinkv3_spi_init, - .map_flash_region = fallback_map, - .unmap_flash_region = fallback_unmap, - .delay = internal_delay, - }, -#endif -}; - -const size_t programmer_table_size = ARRAY_SIZE(programmer_table); - #define SHUTDOWN_MAXFN 32 static int shutdown_fn_count = 0; /** @private */ diff --git a/meson.build b/meson.build index 8ff08b1..0017071 100644 --- a/meson.build +++ b/meson.build @@ -361,6 +361,7 @@ srcs += 'opaque.c' srcs += 'print.c' srcs += 'programmer.c' +srcs += 'programmer_table.c' srcs += 's25f.c' srcs += 'sfdp.c' srcs += 'spi25.c' diff --git a/programmer_table.c b/programmer_table.c new file mode 100644 index 0000000..3c6dd58 --- /dev/null +++ b/programmer_table.c @@ -0,0 +1,493 @@ +/* + * This file is part of the flashrom project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "programmer.h" + +const struct programmer_entry programmer_table[] = { +#if CONFIG_INTERNAL == 1 + { + .name = "internal", + .type = OTHER, + .devs.note = NULL, + .init = internal_init, + .map_flash_region = physmap, + .unmap_flash_region = physunmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DUMMY == 1 + { + .name = "dummy", + .type = OTHER, + /* FIXME */ + .devs.note = "Dummy device, does nothing and logs all accesses\n", + .init = dummy_init, + .map_flash_region = dummy_map, + .unmap_flash_region = dummy_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_MEC1308 == 1 + { + .name = "mec1308", + .type = OTHER, + .devs.note = "Microchip MEC1308 Embedded Controller.\n", + .init = mec1308_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NIC3COM == 1 + { + .name = "nic3com", + .type = PCI, + .devs.dev = nics_3com, + .init = nic3com_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICREALTEK == 1 + { + /* This programmer works for Realtek RTL8139 and SMC 1211. */ + .name = "nicrealtek", + .type = PCI, + .devs.dev = nics_realtek, + .init = nicrealtek_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICNATSEMI == 1 + { + .name = "nicnatsemi", + .type = PCI, + .devs.dev = nics_natsemi, + .init = nicnatsemi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_GFXNVIDIA == 1 + { + .name = "gfxnvidia", + .type = PCI, + .devs.dev = gfx_nvidia, + .init = gfxnvidia_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_RAIDEN_DEBUG_SPI == 1 + { + .name = "raiden_debug_spi", + .type = USB, + .devs.dev = devs_raiden, + .init = raiden_debug_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DRKAISER == 1 + { + .name = "drkaiser", + .type = PCI, + .devs.dev = drkaiser_pcidev, + .init = drkaiser_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_SATASII == 1 + { + .name = "satasii", + .type = PCI, + .devs.dev = satas_sii, + .init = satasii_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ATAHPT == 1 + { + .name = "atahpt", + .type = PCI, + .devs.dev = ata_hpt, + .init = atahpt_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ATAVIA == 1 + { + .name = "atavia", + .type = PCI, + .devs.dev = ata_via, + .init = atavia_init, + .map_flash_region = atavia_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ATAPROMISE == 1 + { + .name = "atapromise", + .type = PCI, + .devs.dev = ata_promise, + .init = atapromise_init, + .map_flash_region = atapromise_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_IT8212 == 1 + { + .name = "it8212", + .type = PCI, + .devs.dev = devs_it8212, + .init = it8212_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_FT2232_SPI == 1 + { + .name = "ft2232_spi", + .type = USB, + .devs.dev = devs_ft2232spi, + .init = ft2232_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_SERPROG == 1 + { + .name = "serprog", + .type = OTHER, + /* FIXME */ + .devs.note = "All programmer devices speaking the serprog protocol\n", + .init = serprog_init, + .map_flash_region = serprog_map, + .unmap_flash_region = fallback_unmap, + .delay = serprog_delay, + }, +#endif + +#if CONFIG_BUSPIRATE_SPI == 1 + { + .name = "buspirate_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "Dangerous Prototypes Bus Pirate\n", + .init = buspirate_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DEDIPROG == 1 + { + .name = "dediprog", + .type = USB, + .devs.dev = devs_dediprog, + .init = dediprog_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_DEVELOPERBOX_SPI == 1 + { + .name = "developerbox", + .type = USB, + .devs.dev = devs_developerbox_spi, + .init = developerbox_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_ENE_LPC == 1 + { + .name = "ene_lpc", + .type = OTHER, + .devs.note = "ENE LPC interface keyboard controller\n", + .init = ene_lpc_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_RAYER_SPI == 1 + { + .name = "rayer_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "RayeR parallel port programmer\n", + .init = rayer_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_PONY_SPI == 1 + { + .name = "pony_spi", + .type = OTHER, + /* FIXME */ + .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n", + .init = pony_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICINTEL == 1 + { + .name = "nicintel", + .type = PCI, + .devs.dev = nics_intel, + .init = nicintel_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICINTEL_SPI == 1 + { + .name = "nicintel_spi", + .type = PCI, + .devs.dev = nics_intel_spi, + .init = nicintel_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NICINTEL_EEPROM == 1 + { + .name = "nicintel_eeprom", + .type = PCI, + .devs.dev = nics_intel_ee, + .init = nicintel_ee_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_OGP_SPI == 1 + { + .name = "ogp_spi", + .type = PCI, + .devs.dev = ogp_spi, + .init = ogp_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_SATAMV == 1 + { + .name = "satamv", + .type = PCI, + .devs.dev = satas_mv, + .init = satamv_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LINUX_MTD == 1 + { + .name = "linux_mtd", + .type = OTHER, + .devs.note = "Device files /dev/mtd*\n", + .init = linux_mtd_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LINUX_SPI == 1 + { + .name = "linux_spi", + .type = OTHER, + .devs.note = "Device files /dev/spidev*.*\n", + .init = linux_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LSPCON_I2C_SPI == 1 + { + .name = "lspcon_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = lspcon_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_REALTEK_MST_I2C_SPI == 1 + { + .name = "realtek_mst_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = realtek_mst_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_USBBLASTER_SPI == 1 + { + .name = "usbblaster_spi", + .type = USB, + .devs.dev = devs_usbblasterspi, + .init = usbblaster_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_MSTARDDC_SPI == 1 + { + .name = "mstarddc_spi", + .type = OTHER, + .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n", + .init = mstarddc_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_PICKIT2_SPI == 1 + { + .name = "pickit2_spi", + .type = USB, + .devs.dev = devs_pickit2_spi, + .init = pickit2_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_CH341A_SPI == 1 + { + .name = "ch341a_spi", + .type = USB, + .devs.dev = devs_ch341a_spi, + .init = ch341a_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = ch341a_spi_delay, + }, +#endif + +#if CONFIG_DIGILENT_SPI == 1 + { + .name = "digilent_spi", + .type = USB, + .devs.dev = devs_digilent_spi, + .init = digilent_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_JLINK_SPI == 1 + { + .name = "jlink_spi", + .type = OTHER, + .init = jlink_spi_init, + .devs.note = "SEGGER J-Link and compatible devices\n", + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_NI845X_SPI == 1 + { + .name = "ni845x_spi", + .type = OTHER, // choose other because NI-845x uses own USB implementation + .devs.note = "National Instruments USB-845x\n", + .init = ni845x_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + +#if CONFIG_STLINKV3_SPI == 1 + { + .name = "stlinkv3_spi", + .type = USB, + .devs.dev = devs_stlinkv3_spi, + .init = stlinkv3_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif +}; + +const size_t programmer_table_size = ARRAY_SIZE(programmer_table); \ No newline at end of file