Nico Huber submitted this change.
programmer_table: move array content to an own file
Change-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/52944
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M Makefile
M flashrom.c
M meson.build
A programmer_table.c
4 files changed, 495 insertions(+), 479 deletions(-)
diff --git a/Makefile b/Makefile
index b8b40ca..4eb4191 100644
--- a/Makefile
+++ b/Makefile
@@ -633,7 +633,7 @@
###############################################################################
# Library code.
-LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o fmap.o
+LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o programmer_table.o helpers.o ich_descriptors.o fmap.o
###############################################################################
# Frontend related stuff.
diff --git a/flashrom.c b/flashrom.c
index 43a5599..9cd1003 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -58,484 +58,6 @@
/* Is writing allowed with this programmer? */
int programmer_may_write;
-const struct programmer_entry programmer_table[] = {
-#if CONFIG_INTERNAL == 1
- {
- .name = "internal",
- .type = OTHER,
- .devs.note = NULL,
- .init = internal_init,
- .map_flash_region = physmap,
- .unmap_flash_region = physunmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_DUMMY == 1
- {
- .name = "dummy",
- .type = OTHER,
- /* FIXME */
- .devs.note = "Dummy device, does nothing and logs all accesses\n",
- .init = dummy_init,
- .map_flash_region = dummy_map,
- .unmap_flash_region = dummy_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_MEC1308 == 1
- {
- .name = "mec1308",
- .type = OTHER,
- .devs.note = "Microchip MEC1308 Embedded Controller.\n",
- .init = mec1308_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NIC3COM == 1
- {
- .name = "nic3com",
- .type = PCI,
- .devs.dev = nics_3com,
- .init = nic3com_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NICREALTEK == 1
- {
- /* This programmer works for Realtek RTL8139 and SMC 1211. */
- .name = "nicrealtek",
- .type = PCI,
- .devs.dev = nics_realtek,
- .init = nicrealtek_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NICNATSEMI == 1
- {
- .name = "nicnatsemi",
- .type = PCI,
- .devs.dev = nics_natsemi,
- .init = nicnatsemi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_GFXNVIDIA == 1
- {
- .name = "gfxnvidia",
- .type = PCI,
- .devs.dev = gfx_nvidia,
- .init = gfxnvidia_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_RAIDEN_DEBUG_SPI == 1
- {
- .name = "raiden_debug_spi",
- .type = USB,
- .devs.dev = devs_raiden,
- .init = raiden_debug_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_DRKAISER == 1
- {
- .name = "drkaiser",
- .type = PCI,
- .devs.dev = drkaiser_pcidev,
- .init = drkaiser_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_SATASII == 1
- {
- .name = "satasii",
- .type = PCI,
- .devs.dev = satas_sii,
- .init = satasii_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_ATAHPT == 1
- {
- .name = "atahpt",
- .type = PCI,
- .devs.dev = ata_hpt,
- .init = atahpt_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_ATAVIA == 1
- {
- .name = "atavia",
- .type = PCI,
- .devs.dev = ata_via,
- .init = atavia_init,
- .map_flash_region = atavia_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_ATAPROMISE == 1
- {
- .name = "atapromise",
- .type = PCI,
- .devs.dev = ata_promise,
- .init = atapromise_init,
- .map_flash_region = atapromise_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_IT8212 == 1
- {
- .name = "it8212",
- .type = PCI,
- .devs.dev = devs_it8212,
- .init = it8212_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_FT2232_SPI == 1
- {
- .name = "ft2232_spi",
- .type = USB,
- .devs.dev = devs_ft2232spi,
- .init = ft2232_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_SERPROG == 1
- {
- .name = "serprog",
- .type = OTHER,
- /* FIXME */
- .devs.note = "All programmer devices speaking the serprog protocol\n",
- .init = serprog_init,
- .map_flash_region = serprog_map,
- .unmap_flash_region = fallback_unmap,
- .delay = serprog_delay,
- },
-#endif
-
-#if CONFIG_BUSPIRATE_SPI == 1
- {
- .name = "buspirate_spi",
- .type = OTHER,
- /* FIXME */
- .devs.note = "Dangerous Prototypes Bus Pirate\n",
- .init = buspirate_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_DEDIPROG == 1
- {
- .name = "dediprog",
- .type = USB,
- .devs.dev = devs_dediprog,
- .init = dediprog_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_DEVELOPERBOX_SPI == 1
- {
- .name = "developerbox",
- .type = USB,
- .devs.dev = devs_developerbox_spi,
- .init = developerbox_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_ENE_LPC == 1
- {
- .name = "ene_lpc",
- .type = OTHER,
- .devs.note = "ENE LPC interface keyboard controller\n",
- .init = ene_lpc_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_RAYER_SPI == 1
- {
- .name = "rayer_spi",
- .type = OTHER,
- /* FIXME */
- .devs.note = "RayeR parallel port programmer\n",
- .init = rayer_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_PONY_SPI == 1
- {
- .name = "pony_spi",
- .type = OTHER,
- /* FIXME */
- .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n",
- .init = pony_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NICINTEL == 1
- {
- .name = "nicintel",
- .type = PCI,
- .devs.dev = nics_intel,
- .init = nicintel_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NICINTEL_SPI == 1
- {
- .name = "nicintel_spi",
- .type = PCI,
- .devs.dev = nics_intel_spi,
- .init = nicintel_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NICINTEL_EEPROM == 1
- {
- .name = "nicintel_eeprom",
- .type = PCI,
- .devs.dev = nics_intel_ee,
- .init = nicintel_ee_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_OGP_SPI == 1
- {
- .name = "ogp_spi",
- .type = PCI,
- .devs.dev = ogp_spi,
- .init = ogp_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_SATAMV == 1
- {
- .name = "satamv",
- .type = PCI,
- .devs.dev = satas_mv,
- .init = satamv_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_LINUX_MTD == 1
- {
- .name = "linux_mtd",
- .type = OTHER,
- .devs.note = "Device files /dev/mtd*\n",
- .init = linux_mtd_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_LINUX_SPI == 1
- {
- .name = "linux_spi",
- .type = OTHER,
- .devs.note = "Device files /dev/spidev*.*\n",
- .init = linux_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_LSPCON_I2C_SPI == 1
- {
- .name = "lspcon_i2c_spi",
- .type = OTHER,
- .devs.note = "Device files /dev/i2c-*.\n",
- .init = lspcon_i2c_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_REALTEK_MST_I2C_SPI == 1
- {
- .name = "realtek_mst_i2c_spi",
- .type = OTHER,
- .devs.note = "Device files /dev/i2c-*.\n",
- .init = realtek_mst_i2c_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_USBBLASTER_SPI == 1
- {
- .name = "usbblaster_spi",
- .type = USB,
- .devs.dev = devs_usbblasterspi,
- .init = usbblaster_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_MSTARDDC_SPI == 1
- {
- .name = "mstarddc_spi",
- .type = OTHER,
- .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n",
- .init = mstarddc_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_PICKIT2_SPI == 1
- {
- .name = "pickit2_spi",
- .type = USB,
- .devs.dev = devs_pickit2_spi,
- .init = pickit2_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_CH341A_SPI == 1
- {
- .name = "ch341a_spi",
- .type = USB,
- .devs.dev = devs_ch341a_spi,
- .init = ch341a_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = ch341a_spi_delay,
- },
-#endif
-
-#if CONFIG_DIGILENT_SPI == 1
- {
- .name = "digilent_spi",
- .type = USB,
- .devs.dev = devs_digilent_spi,
- .init = digilent_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_JLINK_SPI == 1
- {
- .name = "jlink_spi",
- .type = OTHER,
- .init = jlink_spi_init,
- .devs.note = "SEGGER J-Link and compatible devices\n",
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_NI845X_SPI == 1
- {
- .name = "ni845x_spi",
- .type = OTHER, // choose other because NI-845x uses own USB implementation
- .devs.note = "National Instruments USB-845x\n",
- .init = ni845x_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-
-#if CONFIG_STLINKV3_SPI == 1
- {
- .name = "stlinkv3_spi",
- .type = USB,
- .devs.dev = devs_stlinkv3_spi,
- .init = stlinkv3_spi_init,
- .map_flash_region = fallback_map,
- .unmap_flash_region = fallback_unmap,
- .delay = internal_delay,
- },
-#endif
-};
-
-const size_t programmer_table_size = ARRAY_SIZE(programmer_table);
-
#define SHUTDOWN_MAXFN 32
static int shutdown_fn_count = 0;
/** @private */
diff --git a/meson.build b/meson.build
index 8ff08b1..0017071 100644
--- a/meson.build
+++ b/meson.build
@@ -361,6 +361,7 @@
srcs += 'opaque.c'
srcs += 'print.c'
srcs += 'programmer.c'
+srcs += 'programmer_table.c'
srcs += 's25f.c'
srcs += 'sfdp.c'
srcs += 'spi25.c'
diff --git a/programmer_table.c b/programmer_table.c
new file mode 100644
index 0000000..3c6dd58
--- /dev/null
+++ b/programmer_table.c
@@ -0,0 +1,493 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "programmer.h"
+
+const struct programmer_entry programmer_table[] = {
+#if CONFIG_INTERNAL == 1
+ {
+ .name = "internal",
+ .type = OTHER,
+ .devs.note = NULL,
+ .init = internal_init,
+ .map_flash_region = physmap,
+ .unmap_flash_region = physunmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_DUMMY == 1
+ {
+ .name = "dummy",
+ .type = OTHER,
+ /* FIXME */
+ .devs.note = "Dummy device, does nothing and logs all accesses\n",
+ .init = dummy_init,
+ .map_flash_region = dummy_map,
+ .unmap_flash_region = dummy_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_MEC1308 == 1
+ {
+ .name = "mec1308",
+ .type = OTHER,
+ .devs.note = "Microchip MEC1308 Embedded Controller.\n",
+ .init = mec1308_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NIC3COM == 1
+ {
+ .name = "nic3com",
+ .type = PCI,
+ .devs.dev = nics_3com,
+ .init = nic3com_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NICREALTEK == 1
+ {
+ /* This programmer works for Realtek RTL8139 and SMC 1211. */
+ .name = "nicrealtek",
+ .type = PCI,
+ .devs.dev = nics_realtek,
+ .init = nicrealtek_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NICNATSEMI == 1
+ {
+ .name = "nicnatsemi",
+ .type = PCI,
+ .devs.dev = nics_natsemi,
+ .init = nicnatsemi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_GFXNVIDIA == 1
+ {
+ .name = "gfxnvidia",
+ .type = PCI,
+ .devs.dev = gfx_nvidia,
+ .init = gfxnvidia_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_RAIDEN_DEBUG_SPI == 1
+ {
+ .name = "raiden_debug_spi",
+ .type = USB,
+ .devs.dev = devs_raiden,
+ .init = raiden_debug_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_DRKAISER == 1
+ {
+ .name = "drkaiser",
+ .type = PCI,
+ .devs.dev = drkaiser_pcidev,
+ .init = drkaiser_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_SATASII == 1
+ {
+ .name = "satasii",
+ .type = PCI,
+ .devs.dev = satas_sii,
+ .init = satasii_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_ATAHPT == 1
+ {
+ .name = "atahpt",
+ .type = PCI,
+ .devs.dev = ata_hpt,
+ .init = atahpt_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_ATAVIA == 1
+ {
+ .name = "atavia",
+ .type = PCI,
+ .devs.dev = ata_via,
+ .init = atavia_init,
+ .map_flash_region = atavia_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_ATAPROMISE == 1
+ {
+ .name = "atapromise",
+ .type = PCI,
+ .devs.dev = ata_promise,
+ .init = atapromise_init,
+ .map_flash_region = atapromise_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_IT8212 == 1
+ {
+ .name = "it8212",
+ .type = PCI,
+ .devs.dev = devs_it8212,
+ .init = it8212_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_FT2232_SPI == 1
+ {
+ .name = "ft2232_spi",
+ .type = USB,
+ .devs.dev = devs_ft2232spi,
+ .init = ft2232_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_SERPROG == 1
+ {
+ .name = "serprog",
+ .type = OTHER,
+ /* FIXME */
+ .devs.note = "All programmer devices speaking the serprog protocol\n",
+ .init = serprog_init,
+ .map_flash_region = serprog_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = serprog_delay,
+ },
+#endif
+
+#if CONFIG_BUSPIRATE_SPI == 1
+ {
+ .name = "buspirate_spi",
+ .type = OTHER,
+ /* FIXME */
+ .devs.note = "Dangerous Prototypes Bus Pirate\n",
+ .init = buspirate_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_DEDIPROG == 1
+ {
+ .name = "dediprog",
+ .type = USB,
+ .devs.dev = devs_dediprog,
+ .init = dediprog_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_DEVELOPERBOX_SPI == 1
+ {
+ .name = "developerbox",
+ .type = USB,
+ .devs.dev = devs_developerbox_spi,
+ .init = developerbox_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_ENE_LPC == 1
+ {
+ .name = "ene_lpc",
+ .type = OTHER,
+ .devs.note = "ENE LPC interface keyboard controller\n",
+ .init = ene_lpc_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_RAYER_SPI == 1
+ {
+ .name = "rayer_spi",
+ .type = OTHER,
+ /* FIXME */
+ .devs.note = "RayeR parallel port programmer\n",
+ .init = rayer_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_PONY_SPI == 1
+ {
+ .name = "pony_spi",
+ .type = OTHER,
+ /* FIXME */
+ .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n",
+ .init = pony_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NICINTEL == 1
+ {
+ .name = "nicintel",
+ .type = PCI,
+ .devs.dev = nics_intel,
+ .init = nicintel_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NICINTEL_SPI == 1
+ {
+ .name = "nicintel_spi",
+ .type = PCI,
+ .devs.dev = nics_intel_spi,
+ .init = nicintel_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NICINTEL_EEPROM == 1
+ {
+ .name = "nicintel_eeprom",
+ .type = PCI,
+ .devs.dev = nics_intel_ee,
+ .init = nicintel_ee_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_OGP_SPI == 1
+ {
+ .name = "ogp_spi",
+ .type = PCI,
+ .devs.dev = ogp_spi,
+ .init = ogp_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_SATAMV == 1
+ {
+ .name = "satamv",
+ .type = PCI,
+ .devs.dev = satas_mv,
+ .init = satamv_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_LINUX_MTD == 1
+ {
+ .name = "linux_mtd",
+ .type = OTHER,
+ .devs.note = "Device files /dev/mtd*\n",
+ .init = linux_mtd_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_LINUX_SPI == 1
+ {
+ .name = "linux_spi",
+ .type = OTHER,
+ .devs.note = "Device files /dev/spidev*.*\n",
+ .init = linux_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_LSPCON_I2C_SPI == 1
+ {
+ .name = "lspcon_i2c_spi",
+ .type = OTHER,
+ .devs.note = "Device files /dev/i2c-*.\n",
+ .init = lspcon_i2c_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_REALTEK_MST_I2C_SPI == 1
+ {
+ .name = "realtek_mst_i2c_spi",
+ .type = OTHER,
+ .devs.note = "Device files /dev/i2c-*.\n",
+ .init = realtek_mst_i2c_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_USBBLASTER_SPI == 1
+ {
+ .name = "usbblaster_spi",
+ .type = USB,
+ .devs.dev = devs_usbblasterspi,
+ .init = usbblaster_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_MSTARDDC_SPI == 1
+ {
+ .name = "mstarddc_spi",
+ .type = OTHER,
+ .devs.note = "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n",
+ .init = mstarddc_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_PICKIT2_SPI == 1
+ {
+ .name = "pickit2_spi",
+ .type = USB,
+ .devs.dev = devs_pickit2_spi,
+ .init = pickit2_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_CH341A_SPI == 1
+ {
+ .name = "ch341a_spi",
+ .type = USB,
+ .devs.dev = devs_ch341a_spi,
+ .init = ch341a_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = ch341a_spi_delay,
+ },
+#endif
+
+#if CONFIG_DIGILENT_SPI == 1
+ {
+ .name = "digilent_spi",
+ .type = USB,
+ .devs.dev = devs_digilent_spi,
+ .init = digilent_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_JLINK_SPI == 1
+ {
+ .name = "jlink_spi",
+ .type = OTHER,
+ .init = jlink_spi_init,
+ .devs.note = "SEGGER J-Link and compatible devices\n",
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_NI845X_SPI == 1
+ {
+ .name = "ni845x_spi",
+ .type = OTHER, // choose other because NI-845x uses own USB implementation
+ .devs.note = "National Instruments USB-845x\n",
+ .init = ni845x_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
+#if CONFIG_STLINKV3_SPI == 1
+ {
+ .name = "stlinkv3_spi",
+ .type = USB,
+ .devs.dev = devs_stlinkv3_spi,
+ .init = stlinkv3_spi_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+};
+
+const size_t programmer_table_size = ARRAY_SIZE(programmer_table);
\ No newline at end of file
To view, visit change 52944. To unsubscribe, or for help writing mail filters, visit settings.