Attention is currently required from: Anastasia Klimchuk, Peter Marheine.
Hello Anastasia Klimchuk, Peter Marheine,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/flashrom/+/86411?usp=email
to look at the new patch set (#2).
Change subject: spidriver: Add support for the Excamera Labs SPIDriver programmer ......................................................................
spidriver: Add support for the Excamera Labs SPIDriver programmer
This is a SPI hardware interface with a display (https://spidriver.com/), connected as an FT230X USB serial device at a fixed baud rate of 460800.
Firmware: https://github.com/jamesbowman/spidriver Protocol: https://github.com/jamesbowman/spidriver/blob/master/protocol.md
Most of the implementation is copied from the Bus Pirate programmer.
Tested with a SPIDriver v2 by reading FM25Q128A flash memory on Linux.
Change-Id: I07b23c1146d4ad3606b54a1e8dc8030cf4ebf57b Signed-off-by: Simon Arlott flashrom@octiron.net --- M doc/classic_cli_manpage.rst M include/programmer.h M meson.build M meson_options.txt M programmer_table.c A spidriver.c M test_build.sh 7 files changed, 364 insertions(+), 4 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/11/86411/2