Attention is currently required from: Anastasia Klimchuk, Peter Marheine.

Simon Arlott uploaded patch set #2 to this change.

View Change

spidriver: Add support for the Excamera Labs SPIDriver programmer

This is a SPI hardware interface with a display (https://spidriver.com/),
connected as an FT230X USB serial device at a fixed baud rate of 460800.

Firmware: https://github.com/jamesbowman/spidriver
Protocol: https://github.com/jamesbowman/spidriver/blob/master/protocol.md

Most of the implementation is copied from the Bus Pirate programmer.

Tested with a SPIDriver v2 by reading FM25Q128A flash memory on Linux.

Change-Id: I07b23c1146d4ad3606b54a1e8dc8030cf4ebf57b
Signed-off-by: Simon Arlott <flashrom@octiron.net>
---
M doc/classic_cli_manpage.rst
M include/programmer.h
M meson.build
M meson_options.txt
M programmer_table.c
A spidriver.c
M test_build.sh
7 files changed, 364 insertions(+), 4 deletions(-)

git pull ssh://review.coreboot.org:29418/flashrom refs/changes/11/86411/2

To view, visit change 86411. To unsubscribe, or for help writing mail filters, visit settings.