Alan Green has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33828
Change subject: flashchips.c: Whitespace consistency ......................................................................
flashchips.c: Whitespace consistency
For consistency, and to make the file amenable to manipulation by tools, use only tabs when indenting. Some previous changes had introduced spaces for indenting.
Also ensure that every table entry is separated by a single blank line.
Signed-off-by: Alan Green avg@google.com Change-Id: Ib2193798cc52641d6c443f8851903c749b31cb74 --- M flashchips.c 1 file changed, 101 insertions(+), 98 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/28/33828/1
diff --git a/flashchips.c b/flashchips.c index d85ea74..644479e 100644 --- a/flashchips.c +++ b/flashchips.c @@ -1827,7 +1827,7 @@ .vendor = "Atmel", .name = "AT25DL081", .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, + .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF081, .total_size = 1024, .page_size = 256, @@ -1866,7 +1866,7 @@ .vendor = "Atmel", .name = "AT25DL161", .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, + .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DL161, .total_size = 2048, .page_size = 256, @@ -7428,7 +7428,7 @@ .vendor = "ISSI", .name = "IS25WP032", .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, + .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25WP032, .total_size = 4096, .page_size = 256, @@ -7470,7 +7470,7 @@ .vendor = "ISSI", .name = "IS25WP064", .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, + .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25WP064, .total_size = 8192, .page_size = 256, @@ -10392,7 +10392,7 @@ .vendor = "Micron/Numonyx/ST", .name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, - .manufacture_id = ST_ID, + .manufacture_id = ST_ID, .model_id = ST_N25Q064__3E, .total_size = 8192, .page_size = 256, @@ -10426,7 +10426,7 @@ .vendor = "Micron/Numonyx/ST", .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, - .manufacture_id = ST_ID, + .manufacture_id = ST_ID, .model_id = ST_N25Q128__1E, .total_size = 16384, .page_size = 256, @@ -10459,7 +10459,7 @@ .vendor = "Micron/Numonyx/ST", .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, - .manufacture_id = ST_ID, + .manufacture_id = ST_ID, .model_id = ST_N25Q128__3E, .total_size = 16384, .page_size = 256, @@ -10492,7 +10492,7 @@ .vendor = "Micron", .name = "N25Q256..3E/MT25QL256", /* ..3E/L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, - .manufacture_id = ST_ID, + .manufacture_id = ST_ID, .model_id = ST_N25Q256__3E, .total_size = 32768, .page_size = 256, @@ -10531,7 +10531,7 @@ .vendor = "Micron", .name = "N25Q512..3E/MT25QL512", /* ..3E/L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, - .manufacture_id = ST_ID, + .manufacture_id = ST_ID, .model_id = ST_N25Q512__3E, .total_size = 65536, .page_size = 256, @@ -10988,6 +10988,7 @@ .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, }, + { .vendor = "PMC", .name = "Pm25LD512(C)", @@ -11677,7 +11678,7 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = + .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, @@ -11707,7 +11708,7 @@ .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = + .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, @@ -13568,6 +13569,7 @@ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, + { .vendor = "SST", .name = "SST26VF032B(A)", @@ -13606,7 +13608,6 @@ .voltage = {2700, 3600}, },
- { .vendor = "SST", .name = "SST26VF064B(A)", @@ -14740,6 +14741,7 @@ .read = read_memmapped, .voltage = {4500, 5500}, }, + { /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ .vendor = "ST", @@ -14831,7 +14833,7 @@ .vendor = "ST", .name = "M29W512B", .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, + .manufacture_id = ST_ID, .model_id = ST_M29W512B, .total_size = 64, .page_size = 64 * 1024, @@ -16393,18 +16395,18 @@ },
{ - .vendor = "Winbond", - .name = "W25P80", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25P80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = + .vendor = "Winbond", + .name = "W25P80", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25P80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, @@ -16414,26 +16416,26 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, },
{ - .vendor = "Winbond", - .name = "W25P16", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25P16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = + .vendor = "Winbond", + .name = "W25P16", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25P16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, @@ -16443,26 +16445,26 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, },
{ - .vendor = "Winbond", - .name = "W25P32", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25P32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = + .vendor = "Winbond", + .name = "W25P32", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25P32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, @@ -16472,12 +16474,13 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, }, + { .vendor = "Winbond", .name = "W29C512A/W29EE512", @@ -17294,18 +17297,18 @@ },
{ - .vendor = "Zetta Device", - .name = "ZD25D20", - .bustype = BUS_SPI, - .manufacture_id = ZETTADEVICE_ID, - .model_id = ZETTADEVICE_ZD25D20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = + .vendor = "Zetta Device", + .name = "ZD25D20", + .bustype = BUS_SPI, + .manufacture_id = ZETTADEVICE_ID, + .model_id = ZETTADEVICE_ZD25D20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, @@ -17324,26 +17327,26 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, },
{ - .vendor = "Zetta Device", - .name = "ZD25D40", - .bustype = BUS_SPI, - .manufacture_id = ZETTADEVICE_ID, - .model_id = ZETTADEVICE_ZD25D40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = + .vendor = "Zetta Device", + .name = "ZD25D40", + .bustype = BUS_SPI, + .manufacture_id = ZETTADEVICE_ID, + .model_id = ZETTADEVICE_ZD25D40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, @@ -17362,11 +17365,11 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, },
{