Alan Green has uploaded this change for review.
flashchips.c: Whitespace consistency
For consistency, and to make the file amenable to manipulation by tools,
use only tabs when indenting. Some previous changes had introduced
spaces for indenting.
Also ensure that every table entry is separated by a single blank line.
Signed-off-by: Alan Green <avg@google.com>
Change-Id: Ib2193798cc52641d6c443f8851903c749b31cb74
---
M flashchips.c
1 file changed, 101 insertions(+), 98 deletions(-)
git pull ssh://review.coreboot.org:29418/flashrom refs/changes/28/33828/1
diff --git a/flashchips.c b/flashchips.c
index d85ea74..644479e 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -1827,7 +1827,7 @@
.vendor = "Atmel",
.name = "AT25DL081",
.bustype = BUS_SPI,
- .manufacture_id = ATMEL_ID,
+ .manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF081,
.total_size = 1024,
.page_size = 256,
@@ -1866,7 +1866,7 @@
.vendor = "Atmel",
.name = "AT25DL161",
.bustype = BUS_SPI,
- .manufacture_id = ATMEL_ID,
+ .manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DL161,
.total_size = 2048,
.page_size = 256,
@@ -7428,7 +7428,7 @@
.vendor = "ISSI",
.name = "IS25WP032",
.bustype = BUS_SPI,
- .manufacture_id = ISSI_ID_SPI,
+ .manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25WP032,
.total_size = 4096,
.page_size = 256,
@@ -7470,7 +7470,7 @@
.vendor = "ISSI",
.name = "IS25WP064",
.bustype = BUS_SPI,
- .manufacture_id = ISSI_ID_SPI,
+ .manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25WP064,
.total_size = 8192,
.page_size = 256,
@@ -10392,7 +10392,7 @@
.vendor = "Micron/Numonyx/ST",
.name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
- .manufacture_id = ST_ID,
+ .manufacture_id = ST_ID,
.model_id = ST_N25Q064__3E,
.total_size = 8192,
.page_size = 256,
@@ -10426,7 +10426,7 @@
.vendor = "Micron/Numonyx/ST",
.name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
- .manufacture_id = ST_ID,
+ .manufacture_id = ST_ID,
.model_id = ST_N25Q128__1E,
.total_size = 16384,
.page_size = 256,
@@ -10459,7 +10459,7 @@
.vendor = "Micron/Numonyx/ST",
.name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
- .manufacture_id = ST_ID,
+ .manufacture_id = ST_ID,
.model_id = ST_N25Q128__3E,
.total_size = 16384,
.page_size = 256,
@@ -10492,7 +10492,7 @@
.vendor = "Micron",
.name = "N25Q256..3E/MT25QL256", /* ..3E/L = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
- .manufacture_id = ST_ID,
+ .manufacture_id = ST_ID,
.model_id = ST_N25Q256__3E,
.total_size = 32768,
.page_size = 256,
@@ -10531,7 +10531,7 @@
.vendor = "Micron",
.name = "N25Q512..3E/MT25QL512", /* ..3E/L = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
- .manufacture_id = ST_ID,
+ .manufacture_id = ST_ID,
.model_id = ST_N25Q512__3E,
.total_size = 65536,
.page_size = 256,
@@ -10988,6 +10988,7 @@
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2700, 3600},
},
+
{
.vendor = "PMC",
.name = "Pm25LD512(C)",
@@ -11677,7 +11678,7 @@
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
- .block_erasers =
+ .block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
@@ -11707,7 +11708,7 @@
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
- .block_erasers =
+ .block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
@@ -13568,6 +13569,7 @@
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
+
{
.vendor = "SST",
.name = "SST26VF032B(A)",
@@ -13606,7 +13608,6 @@
.voltage = {2700, 3600},
},
-
{
.vendor = "SST",
.name = "SST26VF064B(A)",
@@ -14740,6 +14741,7 @@
.read = read_memmapped,
.voltage = {4500, 5500},
},
+
{
/* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */
.vendor = "ST",
@@ -14831,7 +14833,7 @@
.vendor = "ST",
.name = "M29W512B",
.bustype = BUS_PARALLEL,
- .manufacture_id = ST_ID,
+ .manufacture_id = ST_ID,
.model_id = ST_M29W512B,
.total_size = 64,
.page_size = 64 * 1024,
@@ -16393,18 +16395,18 @@
},
{
- .vendor = "Winbond",
- .name = "W25P80",
- .bustype = BUS_SPI,
- .manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25P80,
- .total_size = 1024,
- .page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
- .probe = probe_spi_rdid,
- .probe_timing = TIMING_ZERO,
- .block_erasers =
+ .vendor = "Winbond",
+ .name = "W25P80",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25P80,
+ .total_size = 1024,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
@@ -16414,26 +16416,26 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B) supported */
- .voltage = {2700, 3600},
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
},
{
- .vendor = "Winbond",
- .name = "W25P16",
- .bustype = BUS_SPI,
- .manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25P16,
- .total_size = 2048,
- .page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
- .probe = probe_spi_rdid,
- .probe_timing = TIMING_ZERO,
- .block_erasers =
+ .vendor = "Winbond",
+ .name = "W25P16",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25P16,
+ .total_size = 2048,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
@@ -16443,26 +16445,26 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B) supported */
- .voltage = {2700, 3600},
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
},
{
- .vendor = "Winbond",
- .name = "W25P32",
- .bustype = BUS_SPI,
- .manufacture_id = WINBOND_NEX_ID,
- .model_id = WINBOND_NEX_W25P32,
- .total_size = 4096,
- .page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
- .probe = probe_spi_rdid,
- .probe_timing = TIMING_ZERO,
- .block_erasers =
+ .vendor = "Winbond",
+ .name = "W25P32",
+ .bustype = BUS_SPI,
+ .manufacture_id = WINBOND_NEX_ID,
+ .model_id = WINBOND_NEX_W25P32,
+ .total_size = 4096,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
@@ -16472,12 +16474,13 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B) supported */
- .voltage = {2700, 3600},
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
},
+
{
.vendor = "Winbond",
.name = "W29C512A/W29EE512",
@@ -17294,18 +17297,18 @@
},
{
- .vendor = "Zetta Device",
- .name = "ZD25D20",
- .bustype = BUS_SPI,
- .manufacture_id = ZETTADEVICE_ID,
- .model_id = ZETTADEVICE_ZD25D20,
- .total_size = 256,
- .page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
- .probe = probe_spi_rdid,
- .probe_timing = TIMING_ZERO,
- .block_erasers =
+ .vendor = "Zetta Device",
+ .name = "ZD25D20",
+ .bustype = BUS_SPI,
+ .manufacture_id = ZETTADEVICE_ID,
+ .model_id = ZETTADEVICE_ZD25D20,
+ .total_size = 256,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
@@ -17324,26 +17327,26 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
- .read = spi_chip_read,
- .voltage = {2700, 3600},
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
},
{
- .vendor = "Zetta Device",
- .name = "ZD25D40",
- .bustype = BUS_SPI,
- .manufacture_id = ZETTADEVICE_ID,
- .model_id = ZETTADEVICE_ZD25D40,
- .total_size = 512,
- .page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
- .probe = probe_spi_rdid,
- .probe_timing = TIMING_ZERO,
- .block_erasers =
+ .vendor = "Zetta Device",
+ .name = "ZD25D40",
+ .bustype = BUS_SPI,
+ .manufacture_id = ZETTADEVICE_ID,
+ .model_id = ZETTADEVICE_ZD25D40,
+ .total_size = 512,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
@@ -17362,11 +17365,11 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
- .read = spi_chip_read,
- .voltage = {2700, 3600},
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
},
{
To view, visit change 33828. To unsubscribe, or for help writing mail filters, visit settings.