[flashrom-gerrit] Change in flashrom[master]: spi95: Check for success before using send_command's returned data

[Patrick Georgi (Code Review)]

Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/flashrom/+/40970 )

Change subject: spi95: Check for success before using send_command's returned data
......................................................................

spi95: Check for success before using send_command's returned data

If the transfer failed, the data might be invalid.

Change-Id: I3ad9daa00a54e2a3954983cec91b6685f1a98880
Found-By: Coverity Scan #1405870
Signed-off-by: Patrick Georgi 
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40970
Tested-by: build bot (Jenkins) 
Reviewed-by: Angel Pons 
---
M spi95.c
1 file changed, 4 insertions(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Angel Pons: Looks good to me, approved

diff --git a/spi95.c b/spi95.c
index ecb2c1d..976f99a 100644
--- a/spi95.c
+++ b/spi95.c
@@ -33,12 +33,15 @@
    static const unsigned char cmd[ST_M95_RDID_OUTSIZE_MAX] = { ST_M95_RDID };
    unsigned char readarr[ST_M95_RDID_INSIZE];
    uint32_t id1, id2;
+	int ret;

uint32_t rdid_outsize = ST_M95_RDID_2BA_OUTSIZE; // 16 bit address
    if (flash->chip->total_size * KiB > 64 * KiB)
    	rdid_outsize = ST_M95_RDID_3BA_OUTSIZE; // 24 bit address

-	spi_send_command(flash, rdid_outsize, sizeof(readarr), cmd, readarr);
+	ret = spi_send_command(flash, rdid_outsize, sizeof(readarr), cmd, readarr);
+	if (ret)
+		return ret;

id1 = readarr[0]; // manufacture id
    id2 = (readarr[1] << 8) | readarr[2]; // SPI family code + model id