Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/26652 )
Change subject: Remove unneeded white spaces ......................................................................
Remove unneeded white spaces
Change-Id: I90f171924790ced74a62ca344fee8607607aa480 Signed-off-by: Elyes HAOUAS ehaouas@noos.fr Reviewed-on: https://review.coreboot.org/26652 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Paul Menzel paulepanter@users.sourceforge.net Reviewed-by: Nico Huber nico.h@gmx.de --- M board_enable.c M cbtable.c M ch341a_spi.c M chipset_enable.c M dediprog.c M dmi.c M flashchips.h M ich_descriptors.h M it85spi.c M pcidev.c M pickit2_spi.c M print.c M print_wiki.c M util/git-hooks/commit-msg 14 files changed, 24 insertions(+), 24 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved Paul Menzel: Looks good to me, but someone else must approve
diff --git a/board_enable.c b/board_enable.c index a09a075..c3494bd 100644 --- a/board_enable.c +++ b/board_enable.c @@ -527,10 +527,10 @@
/* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM */ /* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */ - /* These bits are reserved on W83697HF/F/HG */ - /* Shouldn't be needed though. */ + /* These bits are reserved on W83697HF/F/HG */ + /* Shouldn't be needed though. */
- /* CR28 Bit3 must be set to 1 to enable flash access to */ + /* CR28 Bit3 must be set to 1 to enable flash access to */ /* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG. */ /* This bit is reserved on W83697HF/F/HG which default to 0 */ sio_mask(port, 0x28, 0x08, 0x08); diff --git a/cbtable.c b/cbtable.c index 0941a07..fe0c368 100644 --- a/cbtable.c +++ b/cbtable.c @@ -31,8 +31,8 @@
/* Tries to find coreboot IDs in the supplied image and compares them to the current IDs. * Returns... - * -1 if IDs in the image do not match the IDs embedded in the current firmware, - * 0 if the IDs could not be found in the image or if they match correctly. + * -1 if IDs in the image do not match the IDs embedded in the current firmware, + * 0 if the IDs could not be found in the image or if they match correctly. */ int cb_check_image(const uint8_t *image, int size) { diff --git a/ch341a_spi.c b/ch341a_spi.c index ee18624..f88b624 100644 --- a/ch341a_spi.c +++ b/ch341a_spi.c @@ -285,7 +285,7 @@
/* The assumed map between UIO command bits, pins on CH341A chip and pins on SPI chip: * UIO CH341A SPI CH341A SPI name - * 0 D0/15 CS/1 (CS0) + * 0 D0/15 CS/1 (CS0) * 1 D1/16 unused (CS1) * 2 D2/17 unused (CS2) * 3 D3/18 SCK/6 (DCK) diff --git a/chipset_enable.c b/chipset_enable.c index 5c874f5..42f6728 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1168,7 +1168,7 @@ /* Works for AMD-768, AMD-8111, VIA VT82C586A/B, VIA VT82C596, VIA VT82C686A/B. * * ROM decode control register matrix - * AMD-768 AMD-8111 VT82C586A/B VT82C596 VT82C686A/B + * AMD-768 AMD-8111 VT82C586A/B VT82C596 VT82C686A/B * 7 FFC0_0000h–FFFF_FFFFh <- FFFE0000h-FFFEFFFFh <- <- * 6 FFB0_0000h–FFBF_FFFFh <- FFF80000h-FFFDFFFFh <- <- * 5 00E8... <- <- FFF00000h-FFF7FFFFh <- @@ -1512,7 +1512,7 @@ /* Should not happen. */ internal_buses_supported = BUS_NONE; msg_pwarn("Flash bus type is unknown (none)\n"); - msg_pinfo("Please send the log files created by "flashrom -p internal -o logfile" to \n" + msg_pinfo("Please send the log files created by "flashrom -p internal -o logfile" to\n" "flashrom@flashrom.org with "your board name: flashrom -V" as the subject to\n" "help us finish support for your chipset. Thanks.\n"); return ERROR_NONFATAL; diff --git a/dediprog.c b/dediprog.c index ef43e90..7fcadfb 100644 --- a/dediprog.c +++ b/dediprog.c @@ -121,7 +121,7 @@ };
enum dediprog_writemode { - WRITE_MODE_PAGE_PGM = 1, + WRITE_MODE_PAGE_PGM = 1, WRITE_MODE_PAGE_WRITE = 2, WRITE_MODE_1B_AAI = 3, WRITE_MODE_2B_AAI = 4, diff --git a/dmi.c b/dmi.c index 1bb3405..4137821 100644 --- a/dmi.c +++ b/dmi.c @@ -60,9 +60,9 @@
/* This list is used to identify supposed laptops. The is_laptop field has the * following meaning: - * - 0: in all likelihood not a laptop - * - 1: in all likelihood a laptop - * - 2: chassis-type is not specific enough + * - 0: in all likelihood not a laptop + * - 1: in all likelihood a laptop + * - 2: chassis-type is not specific enough * A full list of chassis types can be found in the System Management BIOS * (SMBIOS) Reference Specification 2.7.0 section 7.4.1 "Chassis Types" at * http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_2.7.0.pd... diff --git a/flashchips.h b/flashchips.h index 5dedb38..4dce573 100644 --- a/flashchips.h +++ b/flashchips.h @@ -147,7 +147,7 @@ #define ATMEL_AT25F4096 0x64 /* Needs AT25F_RDID */ #define ATMEL_AT25FS010 0x6601 #define ATMEL_AT25FS040 0x6604 -#define ATMEL_AT25SF041 0x8401 +#define ATMEL_AT25SF041 0x8401 #define ATMEL_AT25SF081 0x8501 #define ATMEL_AT25SF161 0x8601 #define ATMEL_AT26DF041 0x4400 diff --git a/ich_descriptors.h b/ich_descriptors.h index fa1990d..4225286 100644 --- a/ich_descriptors.h +++ b/ich_descriptors.h @@ -104,7 +104,7 @@ /* FLCOMP encoding on various generations: * * Chipset/Generation max_speed dual_output density - * [MHz] bits max. bits + * [MHz] bits max. bits * ICH8: 33 N/A 5 0:2, 3:5 * ICH9: 33 N/A 5 0:2, 3:5 * ICH10: 33 N/A 5 0:2, 3:5 diff --git a/it85spi.c b/it85spi.c index f7bc8cb..e47cabb 100644 --- a/it85spi.c +++ b/it85spi.c @@ -53,8 +53,8 @@ * IBF is set to 1 when the host CPU sends a command to the input buffer * of the EC. IBF is cleared to 0 once the command is read by the EC. */ -#define KB_IBF (1 << 1) /* Input Buffer Full */ -#define KB_OBF (1 << 0) /* Output Buffer Full */ +#define KB_IBF (1 << 1) /* Input Buffer Full */ +#define KB_OBF (1 << 0) /* Output Buffer Full */
/* IT8502 supports two access modes: * LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode) diff --git a/pcidev.c b/pcidev.c index 3273341..f5ad819 100644 --- a/pcidev.c +++ b/pcidev.c @@ -221,7 +221,7 @@ dev->func); if (devs[i].status == NT) msg_pinfo("===\nThis PCI device is UNTESTED. Please report the 'flashrom -p " - "xxxx' output \n" + "xxxx' output\n" "to flashrom@flashrom.org if it works for you. Please add the name " "of your\n" "PCI device to the subject. Thank you for your help!\n===\n"); @@ -241,7 +241,7 @@ msg_perr("Error: No supported PCI device found.\n"); return NULL; } else if (found > 1) { - msg_perr("Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:pci=bb:dd.f' \n" + msg_perr("Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:pci=bb:dd.f'\n" "to explicitly select the card with the given BDF (PCI bus, device, function).\n"); return NULL; } @@ -293,7 +293,7 @@ return 0; }
-#define register_undo_pci_write(a, b, c) \ +#define register_undo_pci_write(a, b, c) \ { \ struct undo_pci_write_data *undo_pci_write_data; \ undo_pci_write_data = malloc(sizeof(struct undo_pci_write_data)); \ diff --git a/pickit2_spi.c b/pickit2_spi.c index 037c6dd..a7c90a5 100644 --- a/pickit2_spi.c +++ b/pickit2_spi.c @@ -449,7 +449,7 @@ (void)usb_find_devices(); const uint16_t vid = devs_pickit2_spi[0].vendor_id; const uint16_t pid = devs_pickit2_spi[0].device_id; - struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice); + struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice); if (dev == NULL) { msg_perr("Could not find a PICkit2 on USB!\n"); return 1; diff --git a/print.c b/print.c index 114181e..30f06c8 100644 --- a/print.c +++ b/print.c @@ -974,7 +974,7 @@ B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL), B("MSI", "MS-7336", OK, NULL, "Some non-essential DMI data (e.g. serial numbers) is overwritten when using flashrom. This is an OEM board used by HP (e.g. dx2300 Microtower)."), B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL), - B("MSI", "MS-7357 (G33M)", OK, "http://www.msi.com/product/mb/G33M.html", NULL), + B("MSI", "MS-7357 (G33M)", OK, "http://www.msi.com/product/mb/G33M.html", NULL), B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL), B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), diff --git a/print_wiki.c b/print_wiki.c index 729ef9a..95158f7 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -92,7 +92,7 @@ ! align="center" colspan="2" | Voltage [V]\n\n\ |- bgcolor="#6699ff"\n| colspan="4" | \n\ | Probe\n| Read\n| Erase\n| Write\n\ -| align="center" | Min \n| align="center" | Max\n\n"; +| align="center" | Min\n| align="center" | Max\n\n";
static const char chip_intro[] = "\ \n== Supported flash chips ==\n\n\ @@ -323,7 +323,7 @@ sprintf(vmax, "%0.03f", f->voltage.max / (double)1000); printf("|- bgcolor="#%s"\n| %s || %s || align="right" | %d " "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}" - "|| %s || %s \n", + "|| %s || %s\n", (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name, f->total_size, s, test_state_to_template(f->tested.probe), diff --git a/util/git-hooks/commit-msg b/util/git-hooks/commit-msg index b9217e0..346c08f 100755 --- a/util/git-hooks/commit-msg +++ b/util/git-hooks/commit-msg @@ -47,7 +47,7 @@ # *Do* add Change-Id to temp commits (original code bails out here) # if echo "$clean_message" | head -1 | grep -q '^(fixup|squash)!' # then - # return + # return # fi
if test "false" = "`git config --bool --get gerrit.createChangeId`"