Nico Huber merged this change.
Remove unneeded white spaces
Change-Id: I90f171924790ced74a62ca344fee8607607aa480
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
---
M board_enable.c
M cbtable.c
M ch341a_spi.c
M chipset_enable.c
M dediprog.c
M dmi.c
M flashchips.h
M ich_descriptors.h
M it85spi.c
M pcidev.c
M pickit2_spi.c
M print.c
M print_wiki.c
M util/git-hooks/commit-msg
14 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/board_enable.c b/board_enable.c
index a09a075..c3494bd 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -527,10 +527,10 @@
/* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM */
/* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */
- /* These bits are reserved on W83697HF/F/HG */
- /* Shouldn't be needed though. */
+ /* These bits are reserved on W83697HF/F/HG */
+ /* Shouldn't be needed though. */
- /* CR28 Bit3 must be set to 1 to enable flash access to */
+ /* CR28 Bit3 must be set to 1 to enable flash access to */
/* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG. */
/* This bit is reserved on W83697HF/F/HG which default to 0 */
sio_mask(port, 0x28, 0x08, 0x08);
diff --git a/cbtable.c b/cbtable.c
index 0941a07..fe0c368 100644
--- a/cbtable.c
+++ b/cbtable.c
@@ -31,8 +31,8 @@
/* Tries to find coreboot IDs in the supplied image and compares them to the current IDs.
* Returns...
- * -1 if IDs in the image do not match the IDs embedded in the current firmware,
- * 0 if the IDs could not be found in the image or if they match correctly.
+ * -1 if IDs in the image do not match the IDs embedded in the current firmware,
+ * 0 if the IDs could not be found in the image or if they match correctly.
*/
int cb_check_image(const uint8_t *image, int size)
{
diff --git a/ch341a_spi.c b/ch341a_spi.c
index ee18624..f88b624 100644
--- a/ch341a_spi.c
+++ b/ch341a_spi.c
@@ -285,7 +285,7 @@
/* The assumed map between UIO command bits, pins on CH341A chip and pins on SPI chip:
* UIO CH341A SPI CH341A SPI name
- * 0 D0/15 CS/1 (CS0)
+ * 0 D0/15 CS/1 (CS0)
* 1 D1/16 unused (CS1)
* 2 D2/17 unused (CS2)
* 3 D3/18 SCK/6 (DCK)
diff --git a/chipset_enable.c b/chipset_enable.c
index 5c874f5..42f6728 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -1168,7 +1168,7 @@
/* Works for AMD-768, AMD-8111, VIA VT82C586A/B, VIA VT82C596, VIA VT82C686A/B.
*
* ROM decode control register matrix
- * AMD-768 AMD-8111 VT82C586A/B VT82C596 VT82C686A/B
+ * AMD-768 AMD-8111 VT82C586A/B VT82C596 VT82C686A/B
* 7 FFC0_0000h–FFFF_FFFFh <- FFFE0000h-FFFEFFFFh <- <-
* 6 FFB0_0000h–FFBF_FFFFh <- FFF80000h-FFFDFFFFh <- <-
* 5 00E8... <- <- FFF00000h-FFF7FFFFh <-
@@ -1512,7 +1512,7 @@
/* Should not happen. */
internal_buses_supported = BUS_NONE;
msg_pwarn("Flash bus type is unknown (none)\n");
- msg_pinfo("Please send the log files created by \"flashrom -p internal -o logfile\" to \n"
+ msg_pinfo("Please send the log files created by \"flashrom -p internal -o logfile\" to\n"
"flashrom@flashrom.org with \"your board name: flashrom -V\" as the subject to\n"
"help us finish support for your chipset. Thanks.\n");
return ERROR_NONFATAL;
diff --git a/dediprog.c b/dediprog.c
index ef43e90..7fcadfb 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -121,7 +121,7 @@
};
enum dediprog_writemode {
- WRITE_MODE_PAGE_PGM = 1,
+ WRITE_MODE_PAGE_PGM = 1,
WRITE_MODE_PAGE_WRITE = 2,
WRITE_MODE_1B_AAI = 3,
WRITE_MODE_2B_AAI = 4,
diff --git a/dmi.c b/dmi.c
index 1bb3405..4137821 100644
--- a/dmi.c
+++ b/dmi.c
@@ -60,9 +60,9 @@
/* This list is used to identify supposed laptops. The is_laptop field has the
* following meaning:
- * - 0: in all likelihood not a laptop
- * - 1: in all likelihood a laptop
- * - 2: chassis-type is not specific enough
+ * - 0: in all likelihood not a laptop
+ * - 1: in all likelihood a laptop
+ * - 2: chassis-type is not specific enough
* A full list of chassis types can be found in the System Management BIOS
* (SMBIOS) Reference Specification 2.7.0 section 7.4.1 "Chassis Types" at
* http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_2.7.0.pdf
diff --git a/flashchips.h b/flashchips.h
index 5dedb38..4dce573 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -147,7 +147,7 @@
#define ATMEL_AT25F4096 0x64 /* Needs AT25F_RDID */
#define ATMEL_AT25FS010 0x6601
#define ATMEL_AT25FS040 0x6604
-#define ATMEL_AT25SF041 0x8401
+#define ATMEL_AT25SF041 0x8401
#define ATMEL_AT25SF081 0x8501
#define ATMEL_AT25SF161 0x8601
#define ATMEL_AT26DF041 0x4400
diff --git a/ich_descriptors.h b/ich_descriptors.h
index fa1990d..4225286 100644
--- a/ich_descriptors.h
+++ b/ich_descriptors.h
@@ -104,7 +104,7 @@
/* FLCOMP encoding on various generations:
*
* Chipset/Generation max_speed dual_output density
- * [MHz] bits max. bits
+ * [MHz] bits max. bits
* ICH8: 33 N/A 5 0:2, 3:5
* ICH9: 33 N/A 5 0:2, 3:5
* ICH10: 33 N/A 5 0:2, 3:5
diff --git a/it85spi.c b/it85spi.c
index f7bc8cb..e47cabb 100644
--- a/it85spi.c
+++ b/it85spi.c
@@ -53,8 +53,8 @@
* IBF is set to 1 when the host CPU sends a command to the input buffer
* of the EC. IBF is cleared to 0 once the command is read by the EC.
*/
-#define KB_IBF (1 << 1) /* Input Buffer Full */
-#define KB_OBF (1 << 0) /* Output Buffer Full */
+#define KB_IBF (1 << 1) /* Input Buffer Full */
+#define KB_OBF (1 << 0) /* Output Buffer Full */
/* IT8502 supports two access modes:
* LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode)
diff --git a/pcidev.c b/pcidev.c
index 3273341..f5ad819 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -221,7 +221,7 @@
dev->func);
if (devs[i].status == NT)
msg_pinfo("===\nThis PCI device is UNTESTED. Please report the 'flashrom -p "
- "xxxx' output \n"
+ "xxxx' output\n"
"to flashrom@flashrom.org if it works for you. Please add the name "
"of your\n"
"PCI device to the subject. Thank you for your help!\n===\n");
@@ -241,7 +241,7 @@
msg_perr("Error: No supported PCI device found.\n");
return NULL;
} else if (found > 1) {
- msg_perr("Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:pci=bb:dd.f' \n"
+ msg_perr("Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:pci=bb:dd.f'\n"
"to explicitly select the card with the given BDF (PCI bus, device, function).\n");
return NULL;
}
@@ -293,7 +293,7 @@
return 0;
}
-#define register_undo_pci_write(a, b, c) \
+#define register_undo_pci_write(a, b, c) \
{ \
struct undo_pci_write_data *undo_pci_write_data; \
undo_pci_write_data = malloc(sizeof(struct undo_pci_write_data)); \
diff --git a/pickit2_spi.c b/pickit2_spi.c
index 037c6dd..a7c90a5 100644
--- a/pickit2_spi.c
+++ b/pickit2_spi.c
@@ -449,7 +449,7 @@
(void)usb_find_devices();
const uint16_t vid = devs_pickit2_spi[0].vendor_id;
const uint16_t pid = devs_pickit2_spi[0].device_id;
- struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice);
+ struct usb_device *dev = get_device_by_vid_pid(vid, pid, usedevice);
if (dev == NULL) {
msg_perr("Could not find a PICkit2 on USB!\n");
return 1;
diff --git a/print.c b/print.c
index 114181e..30f06c8 100644
--- a/print.c
+++ b/print.c
@@ -974,7 +974,7 @@
B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
B("MSI", "MS-7336", OK, NULL, "Some non-essential DMI data (e.g. serial numbers) is overwritten when using flashrom. This is an OEM board used by HP (e.g. dx2300 Microtower)."),
B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
- B("MSI", "MS-7357 (G33M)", OK, "http://www.msi.com/product/mb/G33M.html", NULL),
+ B("MSI", "MS-7357 (G33M)", OK, "http://www.msi.com/product/mb/G33M.html", NULL),
B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
diff --git a/print_wiki.c b/print_wiki.c
index 729ef9a..95158f7 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -92,7 +92,7 @@
! align=\"center\" colspan=\"2\" | Voltage [V]\n\n\
|- bgcolor=\"#6699ff\"\n| colspan=\"4\" | \n\
| Probe\n| Read\n| Erase\n| Write\n\
-| align=\"center\" | Min \n| align=\"center\" | Max\n\n";
+| align=\"center\" | Min\n| align=\"center\" | Max\n\n";
static const char chip_intro[] = "\
\n== Supported flash chips ==\n\n\
@@ -323,7 +323,7 @@
sprintf(vmax, "%0.03f", f->voltage.max / (double)1000);
printf("|- bgcolor=\"#%s\"\n| %s || %s || align=\"right\" | %d "
"|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}"
- "|| %s || %s \n",
+ "|| %s || %s\n",
(c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
f->total_size, s,
test_state_to_template(f->tested.probe),
diff --git a/util/git-hooks/commit-msg b/util/git-hooks/commit-msg
index b9217e0..346c08f 100755
--- a/util/git-hooks/commit-msg
+++ b/util/git-hooks/commit-msg
@@ -47,7 +47,7 @@
# *Do* add Change-Id to temp commits (original code bails out here)
# if echo "$clean_message" | head -1 | grep -q '^\(fixup\|squash\)!'
# then
- # return
+ # return
# fi
if test "false" = "`git config --bool --get gerrit.createChangeId`"
To view, visit change 26652. To unsubscribe, or for help writing mail filters, visit settings.