Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/flashrom/+/68855 )
(
4 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: tree/: Rename 'internal_delay()' to 'default_delay()' ......................................................................
tree/: Rename 'internal_delay()' to 'default_delay()'
The non-custom driver programmer delay implementation 'internal_delay()' is unrelated specifically to the 'internal' programmer. The delay implementation is simply a platform-agnostic host delay implementation. Therefore, rename to simply default_delay().
Change-Id: I5e04adf16812ceb1480992c92bca25ed80f8897a Signed-off-by: Edward O'Callaghan quasisec@google.com Reviewed-on: https://review.coreboot.org/c/flashrom/+/68855 Reviewed-by: Alexander Goncharov chat@joursoir.net Reviewed-by: Felix Singer felixsinger@posteo.net Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M amd_imc.c M atavia.c M bitbang_spi.c M ch341a_spi.c M dediprog.c M dummyflasher.c M flashrom.c M ichspi.c M include/flash.h M include/programmer.h M it87spi.c M nicintel_eeprom.c M pony_spi.c M raiden_debug_spi.c M serial.c M serprog.c M udelay.c M wbsio_spi.c 18 files changed, 66 insertions(+), 46 deletions(-)
Approvals: build bot (Jenkins): Verified Felix Singer: Looks good to me, approved Alexander Goncharov: Looks good to me, but someone else must approve
diff --git a/amd_imc.c b/amd_imc.c index 2ee8332..093d42d 100644 --- a/amd_imc.c +++ b/amd_imc.c @@ -60,7 +60,7 @@ msg_pwarn("IMC MBOX: Timeout!\n"); return 1; } - internal_delay(1000); + default_delay(1000); } return 0; } diff --git a/atavia.c b/atavia.c index ebf2949..8af52d6 100644 --- a/atavia.c +++ b/atavia.c @@ -90,7 +90,7 @@ ready = true; break; } else { - internal_delay(1); + default_delay(1); continue; } } @@ -170,7 +170,7 @@
/* Test if a flash chip is attached. */ pci_write_long(dev, PCI_ROM_ADDRESS, (uint32_t)PCI_ROM_ADDRESS_MASK); - internal_delay(90); + default_delay(90); uint32_t base = pci_read_long(dev, PCI_ROM_ADDRESS); msg_pdbg2("BROM base=0x%08x\n", base); if ((base & PCI_ROM_ADDRESS_MASK) == 0) { diff --git a/bitbang_spi.c b/bitbang_spi.c index 71798dc..fadca70 100644 --- a/bitbang_spi.c +++ b/bitbang_spi.c @@ -76,10 +76,10 @@ bitbang_spi_set_sck_set_mosi(master, 0, 0, spi_data); else bitbang_spi_set_sck(master, 0, spi_data); - internal_delay(master->half_period); + default_delay(master->half_period); ret <<= 1; ret |= bitbang_spi_set_sck_get_miso(master, 1, spi_data); - internal_delay(master->half_period); + default_delay(master->half_period); } return ret; } @@ -90,9 +90,9 @@
for (i = 7; i >= 0; i--) { bitbang_spi_set_sck_set_mosi(master, 0, (val >> i) & 1, spi_data); - internal_delay(master->half_period); + default_delay(master->half_period); bitbang_spi_set_sck(master, 1, spi_data); - internal_delay(master->half_period); + default_delay(master->half_period); } }
@@ -122,9 +122,9 @@ readarr[i] = bitbang_spi_read_byte(master, data->spi_data);
bitbang_spi_set_sck(master, 0, data->spi_data); - internal_delay(master->half_period); + default_delay(master->half_period); bitbang_spi_set_cs(master, 1, data->spi_data); - internal_delay(master->half_period); + default_delay(master->half_period); /* FIXME: Run bitbang_spi_release_bus here or in programmer init? */ bitbang_spi_release_bus(master, data->spi_data);
diff --git a/ch341a_spi.c b/ch341a_spi.c index 2dc983f..fe18d13 100644 --- a/ch341a_spi.c +++ b/ch341a_spi.c @@ -326,10 +326,10 @@ { /* There is space for 28 bytes instructions of 750 ns each in the CS packet (32 - 4 for the actual CS * instructions), thus max 21 us, but we avoid getting too near to this boundary and use - * internal_delay() for durations over 20 us. */ + * default_delay() for durations over 20 us. */ if ((usecs + stored_delay_us) > 20) { unsigned int inc = 20 - stored_delay_us; - internal_delay(usecs - inc); + default_delay(usecs - inc); usecs = inc; } stored_delay_us += usecs; diff --git a/dediprog.c b/dediprog.c index 6c41f28..723f4a8 100644 --- a/dediprog.c +++ b/dediprog.c @@ -316,7 +316,7 @@
if (voltage_selector == 0) { /* Wait some time as the original driver does. */ - internal_delay(200 * 1000); + default_delay(200 * 1000); } ret = dediprog_write(dediprog_handle, CMD_SET_VCC, voltage_selector, 0, NULL, 0); if (ret != 0x0) { @@ -326,7 +326,7 @@ } if (voltage_selector != 0) { /* Wait some time as the original driver does. */ - internal_delay(200 * 1000); + default_delay(200 * 1000); } return 0; } diff --git a/dummyflasher.c b/dummyflasher.c index f194c10..e5a9c12 100644 --- a/dummyflasher.c +++ b/dummyflasher.c @@ -897,7 +897,7 @@ msg_pspew(" 0x%02x", readarr[i]); msg_pspew("\n");
- internal_delay((writecnt + readcnt) * emu_data->delay_us); + default_delay((writecnt + readcnt) * emu_data->delay_us); return 0; }
diff --git a/flashrom.c b/flashrom.c index 18c4864..28201a7 100644 --- a/flashrom.c +++ b/flashrom.c @@ -260,18 +260,18 @@ return;
/** - * Drivers should either use internal_delay() directly or their + * Drivers should either use default_delay() directly or their * own custom delay. Only core flashrom logic calls programmer_delay() * which should always have a valid flash context. A NULL context * more than likely indicates a layering violation or BUG however - * for now dispatch a internal_delay() as a safe default for the NULL + * for now dispatch a default_delay() as a safe default for the NULL * base case. */ if (!flash) { msg_perr("%s called with NULL flash context. " "Please report a bug at flashrom@flashrom.org\n", __func__); - return internal_delay(usecs); + return default_delay(usecs); }
if (flash->mst->buses_supported & BUS_SPI) { @@ -282,7 +282,7 @@ return flash->mst->par.delay(flash, usecs); }
- return internal_delay(usecs); + return default_delay(usecs); }
int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, diff --git a/ichspi.c b/ichspi.c index a6587c6..43590d6 100644 --- a/ichspi.c +++ b/ichspi.c @@ -875,7 +875,7 @@
timeout = 100 * 60; /* 60 ms are 9.6 million cycles at 16 MHz. */ while ((REGREAD16(ICH7_REG_SPIS) & SPIS_SCIP) && --timeout) { - internal_delay(10); + default_delay(10); } if (!timeout) { msg_perr("Error: SCIP never cleared!\n"); @@ -951,7 +951,7 @@ /* Wait for Cycle Done Status or Flash Cycle Error. */ while (((REGREAD16(ICH7_REG_SPIS) & (SPIS_CDS | SPIS_FCERR)) == 0) && --timeout) { - internal_delay(10); + default_delay(10); } if (!timeout) { msg_perr("timeout, ICH7_REG_SPIS=0x%04x\n", REGREAD16(ICH7_REG_SPIS)); @@ -991,7 +991,7 @@
timeout = 100 * 60; /* 60 ms are 9.6 million cycles at 16 MHz. */ while ((REGREAD8(swseq_data.reg_ssfsc) & SSFS_SCIP) && --timeout) { - internal_delay(10); + default_delay(10); } if (!timeout) { msg_perr("Error: SCIP never cleared!\n"); @@ -1071,7 +1071,7 @@ /* Wait for Cycle Done Status or Flash Cycle Error. */ while (((REGREAD32(swseq_data.reg_ssfsc) & (SSFS_FDONE | SSFS_FCERR)) == 0) && --timeout) { - internal_delay(10); + default_delay(10); } if (!timeout) { msg_perr("timeout, REG_SSFS=0x%08x\n", REGREAD32(swseq_data.reg_ssfsc)); @@ -1319,7 +1319,7 @@ while ((((hsfs = REGREAD16(ICH9_REG_HSFS)) & (HSFS_FDONE | HSFS_FCERR)) == 0) && --timeout_us) { - internal_delay(8); + default_delay(8); } REGWRITE16(ICH9_REG_HSFS, REGREAD16(ICH9_REG_HSFS)); if (!timeout_us) { diff --git a/include/flash.h b/include/flash.h index 3f78721..aabc785 100644 --- a/include/flash.h +++ b/include/flash.h @@ -60,7 +60,7 @@ const char *descr, uintptr_t phys_addr, size_t len); void master_unmap_flash_region(const struct registered_master *mast, void *virt_addr, size_t len); -/* NOTE: flashctx is not used in internal_delay. In this case, a context should be NULL. */ +/* NOTE: flashctx is not used in default_delay. In this case, a context should be NULL. */ void programmer_delay(const struct flashrom_flashctx *flash, unsigned int usecs);
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) diff --git a/include/programmer.h b/include/programmer.h index 8ba5781..aaa1407 100644 --- a/include/programmer.h +++ b/include/programmer.h @@ -211,7 +211,7 @@ void myusec_delay(unsigned int usecs); void myusec_calibrate_delay(void); void internal_sleep(unsigned int usecs); -void internal_delay(unsigned int usecs); +void default_delay(unsigned int usecs);
#if CONFIG_INTERNAL == 1 /* board_enable.c */ diff --git a/it87spi.c b/it87spi.c index fc29e51..34dbea0 100644 --- a/it87spi.c +++ b/it87spi.c @@ -146,7 +146,7 @@ if((status & SPI_SR_WIP) == 0) return 0;
- internal_delay(1000); + default_delay(1000); } return 0; } diff --git a/nicintel_eeprom.c b/nicintel_eeprom.c index 6922fb7..80ccd88 100644 --- a/nicintel_eeprom.c +++ b/nicintel_eeprom.c @@ -213,7 +213,7 @@ eewr |= BIT(EEWR_CMDV); pci_mmio_writel(eewr, eebar + EEWR);
- internal_delay(5); + default_delay(5); int i; for (i = 0; i < MAX_ATTEMPTS; i++) if (pci_mmio_readl(eebar + EEWR) & BIT(EEWR_DONE)) @@ -338,7 +338,7 @@ nicintel_ee_bitbang(eebar, 0x00, &rdsr);
nicintel_ee_bitset(eebar, EEC, EE_CS, 1); - internal_delay(1); + default_delay(1); if (!(rdsr & SPI_SR_WIP)) { return 0; } @@ -379,7 +379,7 @@ nicintel_ee_bitset(eebar, EEC, EE_CS, 0); nicintel_ee_bitbang(eebar, JEDEC_WREN, NULL); nicintel_ee_bitset(eebar, EEC, EE_CS, 1); - internal_delay(1); + default_delay(1);
/* data */ nicintel_ee_bitset(eebar, EEC, EE_CS, 0); @@ -394,7 +394,7 @@ break; } nicintel_ee_bitset(eebar, EEC, EE_CS, 1); - internal_delay(1); + default_delay(1); if (nicintel_ee_ready(eebar)) goto out; } diff --git a/pony_spi.c b/pony_spi.c index 408fa12..0647f91 100644 --- a/pony_spi.c +++ b/pony_spi.c @@ -244,7 +244,7 @@ for (i = 1; i <= 10; i++) { data_out = i & 1; sp_set_pin(PIN_RTS, data_out); - internal_delay(1000); + default_delay(1000);
/* If DSR does not change, we are not connected to what we think */ if (data_out != sp_get_pin(PIN_DSR)) { diff --git a/raiden_debug_spi.c b/raiden_debug_spi.c index 2478133..8260abd 100644 --- a/raiden_debug_spi.c +++ b/raiden_debug_spi.c @@ -892,7 +892,7 @@ /* Reattempting will not result in a recovery. */ return status; } - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); continue; }
@@ -927,7 +927,7 @@ /* Reattempting will not result in a recovery. */ return status; } - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); } }
@@ -962,7 +962,7 @@ " config attempt = %d\n" " status = 0x%05x\n", config_attempt + 1, status); - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); continue; }
@@ -972,7 +972,7 @@ " config attempt = %d\n" " status = 0x%05x\n", config_attempt + 1, status); - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); continue; }
@@ -1016,7 +1016,7 @@ config_attempt + 1, rsp_config.packet_v2.packet_id, rsp_config.packet_size); - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); } return USB_SPI_HOST_INIT_FAILURE; } @@ -1240,7 +1240,7 @@ /* Reattempting will not result in a recovery. */ return status; } - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); continue; } for (read_attempt = 0; read_attempt < READ_RETRY_ATTEMPTS; @@ -1277,7 +1277,7 @@ } /* Device needs to reset its transmit index. */ restart_response_v2(ctx_data); - internal_delay(RETRY_INTERVAL_US); + default_delay(RETRY_INTERVAL_US); } } } diff --git a/serial.c b/serial.c index 72f9ef6..a0ef632 100644 --- a/serial.c +++ b/serial.c @@ -403,7 +403,7 @@ if (!tmp) { msg_pdbg2("Empty write\n"); empty_writes--; - internal_delay(500); + default_delay(500); if (empty_writes == 0) { msg_perr("Serial port is unresponsive!\n"); return 1; @@ -510,7 +510,7 @@ ret = 0; break; } - internal_delay(1000); /* 1ms units */ + default_delay(1000); /* 1ms units */ } if (really_read != NULL) *really_read = rd_bytes; @@ -596,7 +596,7 @@ break; } } - internal_delay(1000); /* 1ms units */ + default_delay(1000); /* 1ms units */ } if (really_wrote != NULL) *really_wrote = wr_bytes; diff --git a/serprog.c b/serprog.c index a7796ba..84dfd23 100644 --- a/serprog.c +++ b/serprog.c @@ -157,7 +157,7 @@ goto err_out; } /* A second should be enough to get all the answers to the buffer */ - internal_delay(1000 * 1000); + default_delay(1000 * 1000); sp_flush_incoming();
/* Then try up to 8 times to send syncnop and get the correct special * @@ -577,7 +577,7 @@ msg_pspew("%s usecs=%d\n", __func__, usecs); if (!sp_check_commandavail(S_CMD_O_DELAY)) { msg_pdbg2("serprog_delay used, but programmer doesn't support delays natively - emulating\n"); - internal_delay(usecs); + default_delay(usecs); return; } if ((sp_max_write_n) && (sp_write_n_bytes)) diff --git a/udelay.c b/udelay.c index 6c0efc4..82ddcbd 100644 --- a/udelay.c +++ b/udelay.c @@ -235,7 +235,7 @@ }
/* Precise delay. */ -void internal_delay(unsigned int usecs) +void default_delay(unsigned int usecs) { /* If the delay is >1 s, use internal_sleep because timing does not need to be so precise. */ if (usecs > 1000000) { @@ -255,7 +255,7 @@ get_cpu_speed(); }
-void internal_delay(unsigned int usecs) +void default_delay(unsigned int usecs) { udelay(usecs); } diff --git a/wbsio_spi.c b/wbsio_spi.c index b643eb4..d635a09 100644 --- a/wbsio_spi.c +++ b/wbsio_spi.c @@ -155,7 +155,7 @@
OUTB(writearr[0], data->spibase); OUTB(mode, data->spibase + 1); - internal_delay(10); + default_delay(10);
if (!readcnt) return 0;