flashrom

flashrom@flashrom.org

1 participants
9187 discussions

[PATCH] Board enable for MSI MS-6561 (SiS 745)
by Mattias Mattsson 11 Sep '10

11 Sep '10

Hi, This patch adds a board enable for MSI MS-6561 (745 Ultra). SiS 745 chipset + Winbond W83697HF and Winbond W49F002U flash. Probe, read, erase and write all work. Matching on "NB/SB" (they are integrated). Also mark SiS 745 chipset as tested. W49F002U is already PREW. lspci/superiotool output and flashrom logs attached. Thanks, Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 1

[commit] r1158 - trunk
by repository service 11 Sep '10

11 Sep '10

Author: uwe Date: Sat Sep 11 17:25:48 2010 New Revision: 1158 URL: http://flashrom.org/trac/flashrom/changeset/1158 Log: Add a board enable for MSI MS-6561 (745 Ultra). SiS 745 chipset + Winbond W83697HF and Winbond W49F002U flash. Probe, read, erase and write all work. Matching on "NB/SB" (they are integrated). Also mark SiS 745 chipset as tested. lspci/superiotool: http://www.flashrom.org/pipermail/flashrom/2010-September/004705.html Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/chipset_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri Sep 10 16:54:18 2010 (r1157) +++ trunk/board_enable.c Sat Sep 11 17:25:48 2010 (r1158) @@ -388,6 +388,7 @@ * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 * - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237 * - MSI KM4M-V and KM4AM-V: VIA KM400/KM400A + VT8237 + * - MSI MS-6561 (745 Ultra): SiS 745 + W83697HF * - MSI MS-6787 (P4MAM-V/P4MAM-L): VIA P4M266 + VT8235 */ static int w836xx_memw_enable_2e(void) @@ -1837,6 +1838,7 @@ {0x8086, 0x27A0, 0x8086, 0x27a0, 0x8086, 0x27b8, 0x8086, 0x27b8, NULL, "kontron", "986lcd-m", "Kontron", "986LCD-M", 0, OK, board_kontron_986lcd_m}, {0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, "Mitac", "6513WU", 0, OK, board_mitac_6513wu}, {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, /* TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. */ + {0x1039, 0x0745, 0, 0, 0x1039, 0x0018, 0, 0, "^MS-6561", NULL, NULL, "MSI", "MS-6561 (745 Ultra)", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x2560, 0x1462, 0x5770, 0x8086, 0x2562, 0x1462, 0x5778, NULL, NULL, NULL, "MSI", "MS-6577 (Xenon)", 0, OK, w83627hf_gpio25_raise_2e}, {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)", 0, OK, board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio44_raise_2e}, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Fri Sep 10 16:54:18 2010 (r1157) +++ trunk/chipset_enable.c Sat Sep 11 17:25:48 2010 (r1158) @@ -1135,7 +1135,7 @@ {0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis540}, {0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis540}, {0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis540}, - {0x1039, 0x0745, NT, "SiS", "745", enable_flash_sis540}, + {0x1039, 0x0745, OK, "SiS", "745", enable_flash_sis540}, {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis540}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Sep 10 16:54:18 2010 (r1157) +++ trunk/print.c Sat Sep 11 17:25:48 2010 (r1158) @@ -447,6 +447,7 @@ B("MSI", "MS-6156", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL), B("MSI", "MS-6178", 0, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=343", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), B("MSI", "MS-6330 (K7T Turbo)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=327", NULL), + B("MSI", "MS-6561 (745 Ultra)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=274", NULL), B("MSI", "MS-6570 (K7N2)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=519", NULL), B("MSI", "MS-6577 (Xenon)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), B("MSI", "MS-6590 (KT4 Ultra)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=502", NULL),

1 0

saibotd from IRC
by Tobias Duehr 10 Sep '10

10 Sep '10

This is an Acer Aspiron L5100. I've got the BIOS from http://support.acer-euro.com/drivers/desktop/aspire_l5100.html (R01-B0) flashrom -v ---------------- No coreboot table found. DMI string system-manufacturer: "Acer " DMI string system-product-name: "Aspire L5100" DMI string system-version: "R02-A1" DMI string baseboard-manufacturer: "Acer " DMI string baseboard-product-name: "FRS690L " DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8718 Found chipset "AMD SB600", enabling flash write... chipset PCI ID is 1002:438d, SPI base address is at 0x0 ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH. No IT87* serial flash segment enabled. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. lspci -nnvvvxxx ------------------------------ 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Kernel modules: ati-agp 00: 02 10 10 79 06 00 20 22 00 00 00 06 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 42 20 05 00 50: 5b 10 0b 0e ff 00 00 00 00 00 00 00 00 00 00 00 60: 5f 00 00 00 00 00 00 00 00 02 20 00 98 f8 01 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 40 45 00 00 95 00 00 03 20 01 10 00 22 27 00 00 90: 00 00 00 c0 40 c4 40 e3 00 00 00 00 01 00 00 00 a0: 00 00 00 00 00 00 00 00 07 01 00 00 49 01 10 07 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 08 00 80 01 60 00 11 11 d0 00 00 00 d0: 25 06 65 00 02 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 ff ff ff ff 2e 00 00 00 00 00 00 00 f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdc00000-fddfffff Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Kernel modules: shpchp 00: 02 10 12 79 07 00 30 02 00 00 04 06 00 63 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 44 c1 c1 20 22 20: c0 fd d0 fd 01 f8 f1 fb 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 08 00 40: 00 00 00 00 08 b0 03 a8 00 00 00 00 5b 10 0b 0e 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d 00 00 00 5b 10 0b 0e 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:04.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7914] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #4, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4129 Capabilities: [b0] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00: 02 10 14 79 07 04 10 00 00 00 04 06 01 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 e1 e1 00 00 20: b0 fd b0 fd a1 fd a1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 80 41 01 20 80 00 00 60: 10 08 00 00 11 0c 10 01 40 00 11 30 80 0c 20 00 70: c0 03 48 00 00 00 01 00 00 00 00 00 00 00 00 00 80: 05 b0 01 00 0c 30 e0 fe 29 41 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 5b 10 0b 0e 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: a5 00 00 00 10 22 21 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #6, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4141 Capabilities: [b0] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00: 02 10 17 79 07 04 10 00 00 00 04 06 01 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 d1 d1 00 00 20: f0 fd f0 fd e1 fd e1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 80 41 01 20 80 00 00 60: 10 08 00 00 11 0c 10 04 40 00 11 30 80 0c 30 00 70: c0 03 48 00 00 00 01 00 00 00 00 00 00 00 00 00 80: 05 b0 01 00 0c 30 e0 fe 41 41 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d b8 00 00 5b 10 0b 0e 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: a5 00 00 00 10 22 21 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ahci Kernel modules: ahci 00: 02 10 80 43 07 00 30 02 00 01 06 01 00 40 00 00 10: 01 ff 00 00 01 fe 00 00 01 fd 00 00 01 fc 00 00 20: 01 fb 00 00 00 f0 02 fe 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00 40: 10 00 80 02 01 00 10 00 01 00 00 00 00 00 00 00 50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 00 00 2c 58 01 b4 00 58 01 b4 00 90: 58 01 b4 00 58 01 b4 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00 b0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00 c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 87 43 07 00 a0 02 00 10 03 0c 01 40 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00 40: 80 1f 00 00 0a 84 b7 18 07 35 00 00 00 00 00 00 50: 00 98 00 00 00 00 00 00 ff ff ff ff ff 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 88 43 07 00 a0 02 00 10 03 0c 01 40 00 00 10: 00 d0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 89 43 07 00 a0 02 00 10 03 0c 01 40 00 00 10: 00 c0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 8a 43 07 00 a0 02 00 10 03 0c 01 40 00 00 10: 00 b0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 8b 43 07 00 a0 02 00 10 03 0c 01 40 00 00 10: 00 a0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00: 02 10 86 43 17 00 b0 02 00 20 03 0c 01 40 00 00 10: 00 90 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 0e 08 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 01 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00: 02 10 85 43 03 04 30 02 14 00 05 0c 00 00 80 00 10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 40: d4 3b 00 04 00 00 00 00 0f ff 00 00 00 00 00 00 50: e0 00 f0 0e f0 0f f0 0f 11 0b f0 0f 00 00 00 00 60: 01 00 27 00 bf fd 9e 83 3f 90 00 00 20 00 00 00 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0e 80: f0 0b f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 f9 c6 ff 00 00 00 00 00 00 00 00 00 a0: 00 00 ff ff ff ff f0 08 ff fd 26 06 16 79 20 18 b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f900 [size=16] Kernel driver in use: pata_atiixp Kernel modules: pata_atiixp 00: 02 10 8c 43 05 00 20 02 00 8a 01 01 00 40 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 f9 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00 40: 20 5d 00 00 20 ff 00 00 00 00 40 00 00 00 00 00 50: 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 02 10 83 43 06 00 10 04 00 00 03 04 01 40 00 00 10: 04 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 00 00 00 40: 00 00 02 00 00 00 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 ff ff c3 ff 3f ff 42 01 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 0a 90 02 0e 00 0f 00 b8 ff ff ff 70: 67 45 23 00 00 00 00 00 01 00 00 00 05 00 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: fd800000-fd8fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 04 04 40 b0 b0 80 22 20: 90 fd 90 fd 80 fd 80 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 26 00 3c ff 00 00 00 00 0c 01 3f d1 00 01 00 00 50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 18 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00 90: 78 01 70 01 00 00 04 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 2f 01 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 0a 00 00 00 0b 00 00 03 00 fc 00 00 02 fe 00 90: 03 00 d0 00 00 ff df 00 03 00 f8 00 80 ff fb 00 a0: 00 00 00 00 00 00 00 00 03 00 f0 00 00 ff f7 00 b0: 03 00 e0 00 80 4f e0 00 00 00 00 00 00 00 00 00 c0: 13 b0 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 01 02 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: e0 3d f8 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 05 00 00 00 00 00 00 00 24 c2 7d 5d 20 13 22 00 90: 20 0c 01 00 6b 80 10 77 24 00 00 80 00 2a 00 00 a0: ef 02 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: ed 44 7d 39 ac 00 00 00 ec e0 7f 3b 7f b7 1b ef c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 9f 3b 99 90 1e 1b 60 04 ce 31 13 8e f0 63 69 a0 e0: 11 10 90 01 98 7d 56 33 80 31 29 84 c8 77 10 94 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 fd 14 24 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 30 50 00 2a 00 08 1b 21 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 c7 70 00 00 e0 a2 9c 60 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 80 0c 25 26 26 00 e0: 00 00 00 00 7e 20 47 00 19 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 b2 0f 06 00 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller]) Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f8000000 (64-bit, prefetchable) [size=64M] Region 2: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at ce00 [size=256] Region 5: Memory at fdc00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon 00: 02 10 1e 79 07 00 10 00 00 00 00 03 01 40 80 00 10: 0c 00 00 f8 00 00 00 00 04 00 de fd 00 00 00 00 20: 01 ce 00 00 00 00 c0 fd 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 50: 01 80 02 06 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:05.2 Audio device [0403]: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919] Subsystem: Foxconn International, Inc. Device [105b:0e0b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fddfc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4189 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 02 10 19 79 06 00 10 00 00 00 03 04 01 40 00 00 10: 04 c0 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 0b 0e 50: 01 60 02 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 0c 30 e0 fe 00 00 00 00 89 41 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01) Subsystem: AMBIT Microsystem Corp. AR5BXB63 802.11bg NIC [1468:0428] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdbf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [90] MSI-X: Enable- Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=0 offset=00000000 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: ath5k Kernel modules: ath5k 00: 8c 16 1c 00 07 00 10 00 01 00 00 02 01 00 00 00 10: 04 00 bf fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 01 50 00 00 68 14 28 04 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 00 00 40: 01 50 c2 01 00 00 00 00 00 00 00 00 00 00 00 00 50: 05 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 90 11 00 c0 0c 00 00 10 20 00 00 11 3c 03 00 70: 48 00 11 10 00 00 00 00 c0 03 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fde00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Vital Product Data Unknown small resource type 05, will not decode more. Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0300c Data: 4169 Capabilities: [60] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [12c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [148 v1] Device Serial Number 60-00-00-00-10-ec-81-68 Capabilities: [154 v1] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 00: ec 10 68 81 07 04 10 00 01 00 00 02 01 00 00 00 10: 01 de 00 00 00 00 00 00 04 f0 ff fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 68 81 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00 40: 01 48 c2 f7 00 00 00 00 03 50 00 80 29 81 ec 10 50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 69 41 00 00 60: 10 84 01 00 63 7e 00 00 10 58 10 00 11 f4 03 00 70: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11 90: 08 30 00 00 ba 92 03 00 f8 40 06 00 c3 00 00 00 a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00 b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Foxconn International, Inc. Device [105b:0cbf] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at fd9ff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fd9f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci, ohci1394 00: 4c 10 24 80 06 00 10 02 00 10 00 0c 01 40 00 00 10: 00 f0 9f fd 00 80 9f fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 bf 0c 30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 02 04 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00 f0: 10 00 00 00 82 10 00 00 5b 10 bf 0c 00 00 00 00 superiotool -deV ------------------------- superiotool r5050 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Found ITE IT8718F (id=0x8718, rev=0x3) at 0x2e Register dump: idx 20 21 22 23 24 2b val 87 18 03 00 00 00 def 87 18 01 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 00 00 00 00 04 00 80 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 f2 f3 val 00 00 00 00 00 50 00 7f def 00 03 f8 04 00 50 00 7f LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 f2 f3 val 00 02 f8 03 00 50 00 7f def 00 02 f8 03 00 50 00 7f LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 00 00 00 00 00 00 04 08 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 01 02 90 00 00 00 01 00 62 c0 80 00 22 def 00 02 90 02 30 09 00 00 00 00 00 NA NA LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 68 def 01 00 60 00 64 01 02 00 LDN 0x06 (Mouse) idx 30 70 71 f0 val 01 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c5 c8 c9 ca cb cc e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff val 00 01 1a 03 00 00 1f 00 00 02 00 00 00 00 01 20 38 00 00 00 02 00 00 00 00 00 02 03 00 00 00 00 18 00 00 00 00 01 02 03 00 00 00 00 00 00 00 00 00 10 00 00 00 10 00 19 00 00 00 00 00 3a 00 00 00 def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 20 38 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 00 00 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 01 05 30 0b 06 def 00 03 10 0b 00 Environment controller (0x0295) Register dump: idx 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 20 21 22 23 24 25 26 27 28 29 2a 2b 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 50 51 52 53 54 56 57 58 59 5b 5c 5d 5e 5f 60 61 62 63 64 65 68 69 6a 6b 6c 6d 70 71 72 73 74 75 80 81 82 83 88 89 8a 8b 8c 8d 8e 8f 90 91 92 94 95 96 a0 a1 a2 a3 a4 a5 a6 val 13 10 02 00 ff ff 00 00 00 80 14 c9 07 f9 00 ec fe ff fe 55 d0 80 40 80 00 00 00 cc 41 80 44 cf cf b9 b9 4a 48 b7 bc 14 23 16 ff 00 69 50 ec ae cc a7 da 9c 54 24 55 41 cc a7 5a 7f 5a 7f 5a 7f ff 31 7f 7f 7f eb 5d 90 5d 12 80 f8 08 88 00 2c 7f 26 10 62 7f 7f 7f 00 00 7f 00 28 7f 26 10 62 00 00 00 00 00 00 00 00 00 00 02 d1 3c 08 22 2d 98 22 00 00 00 00 00 00 00 def 18 00 00 00 00 00 00 00 00 80 40 09 00 NA NA NA NA NA NA 07 50 MM MM MM NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 00 00 7f 7f 7f 00 00 90 00 12 00 00 00 00 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f NA NA NA NA 00 00 00 00 00 00 02 00 ff 00 00 ff 00 00 00 00 00 00 00 00 00 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found.

2 2

ft2232 programmer
by sblais 10 Sep '10

10 Sep '10

He guys. Just found this project a couple of days ago and after a few lines of code, I can flash our boards just fine! I would like to throw a few ideas around. I expect the ft2232 programmer to be tweaked by quite a bit of people. I had to program an SPI flash but pull down a line on an FPGA to disable it from bus contention. I implemented a shutdown function to allow the FPGA to restart. On another board, I have 2 spi flash to program using the same channel but separate chip selects. I have implemented the changes using the same paradigm used for the JTAGkey. Just because we have a different USB PID, I had to duplicate some code. In this case, the same I/O lines were used. The issue I have with this implementation is that the list of devices in there could fill up quite a bit. A lot of implementations may use the same I/O lines (we did...) If I go and submit my patches, it won't be of much use since our hardware is embedded in our product and won't be public domain. So what do you prefer, complicating the command line parameters by adding PIDs/VIDs, sub-channels (multiple flash chips per channels), Chip select masks or keeping the code simple as is but knowing the code may grow and there may be tons of weird ways to use the chip that may not be usable by all. I believe that while I was writing this, I answered myself... On another note: I had to disable file size checking in the code since I don't have fixed size images. I did not want to pad the files since the last sector of flash is used for other means. Would people mind if I add another switch or change the behaviour of -f to disable file size checking? CONFIDENTIALITY CAUTION This e-mail and any attachments may be confidential or legally privileged. If you received this message in error or are not the intended recipient, you should destroy the e-mail message and any attachments or copies, and you are prohibited from retaining, distributing, disclosing or using any information contained herein. Please inform us of the erroneous delivery by return e-mail. Thank you for your cooperation. DOCUMENT CONFIDENTIEL Le présent courriel et tout fichier joint à celui-ci peuvent contenir des renseignements confidentiels ou privilégiés. Si cet envoi ne s'adresse pas à vous ou si vous l'avez reçu par erreur, vous devez l'effacer. Vous ne pouvez conserver, distribuer, communiquer ou utiliser les renseignements qu'il contient. Nous vous prions de nous signaler l'erreur par courriel. Merci de votre collaboration.

1 0

Re: [flashrom] [PATCH] Board enable for GA-8PE667 Ultra 2
by Thomas Kalka 10 Sep '10

10 Sep '10

Acked-by: Thomas Kalka <thomas.kalka(a)googlemail.com> On Fri, Aug 13, 2010 at 12:39 PM, Michael Karcher < flashrom(a)mkarcher.dialup.fu-berlin.de> wrote: > I had to use the USB controller in the board enable because all other > subsystem IDs are having vendor: Gigabyte but mostly copy the Intel > product IDs. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > --- > board_enable.c | 2 ++ > print.c | 1 + > 2 files changed, 3 insertions(+), 0 deletions(-) > > diff --git a/board_enable.c b/board_enable.c > index 307feeb..0f72110 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -1381,6 +1381,7 @@ static int intel_ich_gpio26_raise(void) > /* > * Suited for: > * - P4SD-LA (HP OEM): i865 + ICH5 > + * - GIGABYTE GA-8PE667 Ultra 2: socket 478 + i845PE + ICH4 > */ > static int intel_ich_gpio32_raise(void) > { > @@ -1779,6 +1780,7 @@ const struct board_pciid_enable board_pciid_enables[] > = { > {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, > NULL, "epox", "ep-bx3", "EPoX", "EP-BX3", > 0, OK, board_epox_ep_bx3}, > {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, > NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", > 512, OK, NULL}, > {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, > NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", > 0, OK, intel_ich_gpio25_raise}, > + {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, > NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra > 2", 0, OK, intel_ich_gpio32_raise}, > {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, > NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", > 0, OK, nvidia_mcp_gpio21_raise}, > {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, > NULL, "hp", "dl145_g3", "HP", "DL145 G3", > 0, OK, board_hp_dl145_g3_enable}, > {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1648, 0x103c, 0x310f, > NULL, "hp", "dl165_g6", "HP", "DL165 G6", > 0, OK, board_hp_dl165_g6_enable}, > diff --git a/print.c b/print.c > index 5946a6c..32aba44 100644 > --- a/print.c > +++ b/print.c > @@ -393,6 +393,7 @@ const struct board_info boards_known[] = { > B("GIGABYTE", "GA-7VT600", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), > B("GIGABYTE", "GA-7ZM", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine > if you remove jumper JP9 on the board and disable the flash protection BIOS > option."), > B("GIGABYTE", "GA-8IRML", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), > + B("GIGABYTE", "GA-8PE667 Ultra 2", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), > B("GIGABYTE", "GA-965P-DS4", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), > B("GIGABYTE", "GA-EP35-DS3L", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), > B("GIGABYTE", "GA-EX58-UD4P", 1, " > http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), > -- > 1.7.1 > >

2 1

Re: [flashrom] [PATCH] Board enable for P4P800
by Uwe Hermann 10 Sep '10

10 Sep '10

On Sun, Aug 15, 2010 at 06:33:44PM +0200, Michael Karcher wrote: > lspci/superiotool: > http://www.coreboot.org/pipermail/flashrom/2010-August/004436.html > > This goes the safe route of adding a match for the P4P800 that does not > match the P4P800-E Deluxe which is already in. It seems quite likely that > the whole P4P800 family could use the same board enable with one generic > board enable match, though. > > This match uses host bridge + audio, because all other IDs match the > P4P800-E Deluxe board, as reported in > http://www.e-monkeys.de/Everest-Bericht.txt > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> No user feedback so far, feel free to commit as untested for now. Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

[commit] r1157 - trunk
by repository service 10 Sep '10

10 Sep '10

Author: mkarcher Date: Fri Sep 10 16:54:18 2010 New Revision: 1157 URL: http://flashrom.org/trac/flashrom/changeset/1157 Log: Board enable for P4P800 lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004436.html This goes the safe route of adding a match for the P4P800 that does not match the P4P800-E Deluxe which is already in. It seems quite likely that the whole P4P800 family could use the same board enable with one generic board enable match, though. This match uses host bridge + audio, because all other IDs match the P4P800-E Deluxe board, as reported in http://www.e-monkeys.de/Everest-Bericht.txt (no user feedback, commit as "untested") Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri Sep 10 16:46:46 2010 (r1156) +++ trunk/board_enable.c Fri Sep 10 16:54:18 2010 (r1157) @@ -1347,6 +1347,7 @@ * Suited for: * - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2 * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5 + * - ASUS P4P800: Intel socket478 + 865PE + ICH5R * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R * - ASUS P5GD1 Pro: Intel LGA 775 + 915P + ICH6R * - ASUS P5PE-VM: Intel LGA775 + 865G + ICH5 @@ -1804,6 +1805,7 @@ {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Sep 10 16:46:46 2010 (r1156) +++ trunk/print.c Fri Sep 10 16:54:18 2010 (r1157) @@ -361,6 +361,7 @@ B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), + B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), B("ASUS", "P4S800-MX", 1, "http://www.asus.com/product.aspx?P_ID=Bb57zoJhmO1Qkcrh", NULL),

1 0

Re: [flashrom] [PATCH] Board enable for ASUS P5GD1 Pro (v2)
by Uwe Hermann 10 Sep '10

10 Sep '10

On Thu, Aug 26, 2010 at 05:20:50PM +0200, Michael Karcher wrote: > lspci/superiotool: > http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html > > matching SMBus + Audio, because SMBus is the only core device with > usable IDs. > > Note for v2: > Now I use the right GPIO pin. Miscounted the bit number in the first attempt. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> as it was successfully tested on hardware. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

[commit] r1156 - trunk
by repository service 10 Sep '10

10 Sep '10

Author: mkarcher Date: Fri Sep 10 16:46:46 2010 New Revision: 1156 URL: http://flashrom.org/trac/flashrom/changeset/1156 Log: Board enable for ASUS P5GD1 Pro lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html matching SMBus + Audio, because SMBus is the only core device with usable IDs. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Sep 7 20:14:53 2010 (r1155) +++ trunk/board_enable.c Fri Sep 10 16:46:46 2010 (r1156) @@ -1348,6 +1348,7 @@ * - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2 * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5 * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R + * - ASUS P5GD1 Pro: Intel LGA 775 + 915P + ICH6R * - ASUS P5PE-VM: Intel LGA775 + 865G + ICH5 * - Samsung Polaris 32: socket478 + 865P + ICH5 */ @@ -1807,6 +1808,7 @@ {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a}, + {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Sep 7 20:14:53 2010 (r1155) +++ trunk/print.c Fri Sep 10 16:46:46 2010 (r1156) @@ -371,6 +371,7 @@ B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/product.aspx?P_ID=PYvbfOokwxUzJky3", NULL), B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), + B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL), B("ASUS", "P5PE-VM", 1, "http://www.asus.com/product.aspx?P_ID=k3h0ZFVu9Lo1dUvk", NULL), B("ASUS", "P6T SE", 1, "http://www.asus.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E", NULL),

1 0

coreboot/flashrom flyers (PDF) needed for FrOSCamp
by Carl-Daniel Hailfinger 10 Sep '10

10 Sep '10

Hi, coreboot and flashrom got a nice booth at the FrOSCamp expo at ETH Zurich (Switzerland) Sept. 17-18 2010. It is sort of a Swiss FOSDEM, and FUDCon EMEA will be in the same place so there will be lots of interesting people to meet. http://wiki.froscamp.org/Welcome Not only do we have a nice and spacious booth, I even got two slots to talk about coreboot and flashrom on Saturday. If you have any coreboot/flashrom related flyers/posters in PDF/PS/... format, please send them to me ASAP so I can make sure they can be printed in time. Peter, I think you once created awesome flyers for coreboot. I'd love to reprint them and distribute them amongst FrOSCamp visitors. I would also appreciate PDFs of coreboot related talks. I do have my own slides for a coreboot introduction, but it's always a good idea to cross-check them against other presentations to make sure I don't forget anything. Regards, Carl-Daniel

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom