Re: [flashrom] [PATCH] Board enable for GA-8PE667 Ultra 2

[Thomas Kalka]

Acked-by: Thomas Kalka

On Fri, Aug 13, 2010 at 12:39 PM, Michael Karcher <
[e-mail]> wrote:
> I had to use the USB controller in the board enable because all other
> subsystem IDs are having vendor: Gigabyte but mostly copy the Intel
> product IDs.
> Signed-off-by: Michael Karcher
>
> board_enable.c |    2 ++
>  print.c        |    1 +
>  2 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/board_enable.c b/board_enable.c
> index 307feeb..0f72110 100644
> --- a/board_enable.c
> +++ b/board_enable.c
> @@ -1381,6 +1381,7 @@ static int intel_ich_gpio26_raise(void)
>  /*
> Suited for:
> P4SD-LA (HP OEM): i865 + ICH5
> GIGABYTE GA-8PE667 Ultra 2: socket 478 + i845PE + ICH4
>
> */
>  static int intel_ich_gpio32_raise(void)
>  {
> @@ -1779,6 +1780,7 @@ const struct board_pciid_enable board_pciid_enables[]
> = {
>        {0x8086, 0x7110,      0,      0,  0x8086, 0x7190,      0,      0,
> NULL,          "epox",       "ep-bx3",      "EPoX",        "EP-BX3",
>        0,   OK, board_epox_ep_bx3},
>        {0x1106, 0x0686, 0x1106, 0x0686,  0x1106, 0x3058, 0x1458, 0xa000,
> NULL,          NULL,         NULL,          "GIGABYTE",    "GA-7ZM",
>        512, OK, NULL},
>        {0x8086, 0x244b, 0x8086, 0x2442,  0x8086, 0x2445, 0x1458, 0xa002,
> NULL,          NULL,         NULL,          "GIGABYTE",    "GA-8IRML",
>        0,   OK, intel_ich_gpio25_raise},
>   {0x8086, 0x24c3, 0x1458, 0x24c2,  0x8086, 0x24cd, 0x1458, 0x5004,
>
> NULL,          NULL,         NULL,          "GIGABYTE",    "GA-8PE667 Ultra
> 2",     0,   OK, intel_ich_gpio32_raise},
>        {0x10DE, 0x0050, 0x1458, 0x0C11,  0x10DE, 0x005e, 0x1458, 0x5000,
> NULL,          NULL,         NULL,          "GIGABYTE",    "GA-K8N-SLI",
>        0,   OK, nvidia_mcp_gpio21_raise},
>        {0x1166, 0x0223, 0x103c, 0x320d,  0x14e4, 0x1678, 0x103c, 0x703e,
> NULL,          "hp",         "dl145_g3",    "HP",          "DL145 G3",
>        0,   OK, board_hp_dl145_g3_enable},
>        {0x1166, 0x0223, 0x103c, 0x320d,  0x14e4, 0x1648, 0x103c, 0x310f,
> NULL,          "hp",         "dl165_g6",    "HP",          "DL165 G6",
>        0,   OK, board_hp_dl165_g6_enable},
> diff --git a/print.c b/print.c
> index 5946a6c..32aba44 100644
> --- a/print.c
> +++ b/print.c
> @@ -393,6 +393,7 @@ const struct board_info boards_known[] = {
>        B("GIGABYTE",   "GA-7VT600",            1, "
> http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
>        B("GIGABYTE",   "GA-7ZM",               1, "
> http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine
> if you remove jumper JP9 on the board and disable the flash protection BIOS
> option."),
>        B("GIGABYTE",   "GA-8IRML",             1, "
> http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
>   B("GIGABYTE",   "GA-8PE667 Ultra 2",    1, "
>
> http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
>        B("GIGABYTE",   "GA-965P-DS4",          1, "
> http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
>        B("GIGABYTE",   "GA-EP35-DS3L",         1, "
> http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
>        B("GIGABYTE",   "GA-EX58-UD4P",         1, "
> http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
> --
> 1.7.1

[PATCH] Board enable for GA-8PE667 Ultra 2

[Michael Karcher]

Am Freitag, den 13.08.2010, 12:56 +0200 schrieb Thomas Kalka:
> Acked-by: Thomas Kalka

Thanks for your official Ack!
>     Signed-off-by: Michael Karcher
>     <[e-mail]>

This was committed in r1138.

Regards,
  Michael Karcher